# Community

**URL:** https://discourse.shapr3d.com/c/community/50.md?page=2

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 3

---

## [Trying to create alignment pins and holes for split body](https://discourse.shapr3d.com/t/trying-to-create-alignment-pins-and-holes-for-split-body/41088)

<div class="topic-metadata">

**Author:** [@gstanden](https://discourse.shapr3d.com/u/gstanden)\
**Replies:** 16\
**Last updated:** [July 11, 2026, 9:49pm UTC](https://discourse.shapr3d.com/t/trying-to-create-alignment-pins-and-holes-for-split-body/41088 "2026-07-11T21:49:13Z")

</div>

I split the body and created pins per instructions and made sure pins were separated bodies. When I select the face to create the holes for the pins on the other half of the body, then select the pin, I don’t get a “Done…

---

## [DeLorean Time Machine](https://discourse.shapr3d.com/t/delorean-time-machine/41201)

<div class="topic-metadata">

**Author:** [@mattp02](https://discourse.shapr3d.com/u/mattp02)\
**Replies:** 5\
**Last updated:** [July 10, 2026, 11:15am UTC](https://discourse.shapr3d.com/t/delorean-time-machine/41201 "2026-07-10T11:15:14Z")

</div>

Hi all, I’m a teacher of engineering but on the side I build movie cars. I’m on my second DeLorean and will be tackling an Ecto and Batmobile soon. I do all my designing on Shapr. I teach solidworks, but find this so use…

---

## [Simple feet for solar panel supports](https://discourse.shapr3d.com/t/simple-feet-for-solar-panel-supports/41203)

<div class="topic-metadata">

**Author:** [@Eableson](https://discourse.shapr3d.com/u/Eableson)\
**Replies:** 0\
**Last updated:** [July 10, 2026, 6:15am UTC](https://discourse.shapr3d.com/t/simple-feet-for-solar-panel-supports/41203 "2026-07-10T06:15:22Z")

</div>

A stupid little design, as I was finding ground mount kits for solar panels ridiculously expensive so I just took some 30mm square aluminum tubing, drilled holes to match the mounting holes on the panels, eyeballed the 4…

---

## [Rings manufactured for fun](https://discourse.shapr3d.com/t/rings-manufactured-for-fun/41178)

<div class="topic-metadata">

**Author:** [@Devvon](https://discourse.shapr3d.com/u/Devvon)\
**Replies:** 2\
**Last updated:** [July 9, 2026, 6:53pm UTC](https://discourse.shapr3d.com/t/rings-manufactured-for-fun/41178 "2026-07-09T18:53:38Z")

</div>

Designed and had this ring cast in silver, tested first in resin and after proof of concept, had final made. Thought it came out great!

---

## [Combo Dog Leash Epi Pen Holder](https://discourse.shapr3d.com/t/combo-dog-leash-epi-pen-holder/41200)

<div class="topic-metadata">

**Author:** [@polymatt](https://discourse.shapr3d.com/u/polymatt)\
**Replies:** 2\
**Last updated:** [July 9, 2026, 5:28pm UTC](https://discourse.shapr3d.com/t/combo-dog-leash-epi-pen-holder/41200 "2026-07-09T17:28:47Z")

</div>

So a little story for this side quest: Our little 7lb pup got stung by a bee and had a severe reaction and stopped breathing. Luckily we got her to an emergency vet in time but it was incredibly close. We now carry small…

---

## [Deep Rock Galactic data rack (board game asset)](https://discourse.shapr3d.com/t/deep-rock-galactic-data-rack-board-game-asset/41173)

<div class="topic-metadata">

**Author:** [@Devvon](https://discourse.shapr3d.com/u/Devvon)\
**Replies:** 6\
**Last updated:** [July 7, 2026, 5:28pm UTC](https://discourse.shapr3d.com/t/deep-rock-galactic-data-rack-board-game-asset/41173 "2026-07-07T17:28:27Z")

</div>

Designed this last night, I am getting my board game in the mail and was excited. This is called a data rack and the token from the game is included, I wanted a 3d model though to put on the map. Now to 3D print it! …

---

## [Boredom flower](https://discourse.shapr3d.com/t/boredom-flower/41183)

<div class="topic-metadata">

**Author:** [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Replies:** 2\
**Last updated:** [July 6, 2026, 2:14pm UTC](https://discourse.shapr3d.com/t/boredom-flower/41183 "2026-07-06T14:14:03Z")

</div>

---

## [Assistance for design of hinge for handcuff](https://discourse.shapr3d.com/t/assistance-for-design-of-hinge-for-handcuff/41170)

<div class="topic-metadata">

**Author:** [@alex\_brocky](https://discourse.shapr3d.com/u/alex_brocky)\
**Replies:** 14\
**Last updated:** [July 5, 2026, 8:55am UTC](https://discourse.shapr3d.com/t/assistance-for-design-of-hinge-for-handcuff/41170 "2026-07-05T08:55:52Z")

</div>

Please be patient, I am just learning! I am looking for an explanation, or screen shot of how i may gp about designing a single handcuff. its how the hinge would design, and then the clasp the other side that would go…

---

## [Drinking mugs designed and printed](https://discourse.shapr3d.com/t/drinking-mugs-designed-and-printed/41177)

<div class="topic-metadata">

**Author:** [@Devvon](https://discourse.shapr3d.com/u/Devvon)\
**Replies:** 0\
**Last updated:** [July 5, 2026, 12:42am UTC](https://discourse.shapr3d.com/t/drinking-mugs-designed-and-printed/41177 "2026-07-05T00:42:50Z")

</div>

designed this a little while ago, did some special valentines editions and Christmas, and some standard. They came out great though and thought I’d share them. I designed them to take snap in stainless steel cups. 3D pr…

---

## [Fallout control necklace (Roleplay)](https://discourse.shapr3d.com/t/fallout-control-necklace-roleplay/41174)

<div class="topic-metadata">

**Author:** [@Devvon](https://discourse.shapr3d.com/u/Devvon)\
**Replies:** 4\
**Last updated:** [July 4, 2026, 12:42pm UTC](https://discourse.shapr3d.com/t/fallout-control-necklace-roleplay/41174 "2026-07-04T12:42:01Z")

</div>

Designed this a little while back for some RP events in airsoft, thought they came out great and felt I’d post them. The center of the grey model was a test version unfinished. My dog was a wonderful test subject for the…

---

## [Mould Making in Shapr3D](https://discourse.shapr3d.com/t/mould-making-in-shapr3d/41169)

<div class="topic-metadata">

**Author:** [@Fawksey3D](https://discourse.shapr3d.com/u/Fawksey3D)\
**Replies:** 2\
**Last updated:** [July 3, 2026, 6:30pm UTC](https://discourse.shapr3d.com/t/mould-making-in-shapr3d/41169 "2026-07-03T18:30:45Z")

</div>

You know those ideas that keep circling back in your mind. This is one of those for me—mouldings. I’m not sure what it is—perhaps because I work in waste and recycling, and there is a lot of recycled granular matrix that…

---

## [PuzzleBank](https://discourse.shapr3d.com/t/puzzlebank/41154)

<div class="topic-metadata">

**Author:** [@Fawksey3D](https://discourse.shapr3d.com/u/Fawksey3D)\
**Replies:** 1\
**Last updated:** [July 1, 2026, 10:04pm UTC](https://discourse.shapr3d.com/t/puzzlebank/41154 "2026-07-01T22:04:31Z")

</div>

Stores £1 coins. Intend to make other currency version, just lost a bit of energy on it. Works well. Save £120 in l=for last Christmas.

---

## [Lcac100](https://discourse.shapr3d.com/t/lcac100/41136)

<div class="topic-metadata">

**Author:** [@Devvon](https://discourse.shapr3d.com/u/Devvon)\
**Replies:** 2\
**Last updated:** [June 29, 2026, 10:02pm UTC](https://discourse.shapr3d.com/t/lcac100/41136 "2026-06-29T22:02:19Z")

</div>

This is a model of the new LCAC 100 class, thought it came out pretty good, I have been updating it here and there as i get time. a buddy of mine has been 3D printing them in color and they come out fantastic, i also add…

---

## [Exporting a part for printing considerations](https://discourse.shapr3d.com/t/exporting-a-part-for-printing-considerations/41103)

<div class="topic-metadata">

**Author:** [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Replies:** 8\
**Last updated:** [June 25, 2026, 3:35pm UTC](https://discourse.shapr3d.com/t/exporting-a-part-for-printing-considerations/41103 "2026-06-25T15:35:27Z")

</div>

I exported a part to print that was slightly tilted. I used the “Lay on face” command in Bambu slicer. When I printed 3 of the same parts the 2 circles at the bottom of each part lost adhesion to the bed on the same edg…

---

## [Cannot get past tutorial due to scroll not working in program only](https://discourse.shapr3d.com/t/cannot-get-past-tutorial-due-to-scroll-not-working-in-program-only/41105)

<div class="topic-metadata">

**Author:** [@nuttycolin](https://discourse.shapr3d.com/u/nuttycolin)\
**Replies:** 1\
**Last updated:** [June 25, 2026, 10:33am UTC](https://discourse.shapr3d.com/t/cannot-get-past-tutorial-due-to-scroll-not-working-in-program-only/41105 "2026-06-25T10:33:21Z")

</div>

The scroll on my mouse is 100% not the issue as it works on everything else. I am stuck on the tutorial. Can you please resolve this issue or tell me how to bypass this one step?

---

## [Creating parts for product pipes](https://discourse.shapr3d.com/t/creating-parts-for-product-pipes/41094)

<div class="topic-metadata">

**Author:** [@MarcusAnthony](https://discourse.shapr3d.com/u/MarcusAnthony)\
**Replies:** 14\
**Last updated:** [June 24, 2026, 5:41pm UTC](https://discourse.shapr3d.com/t/creating-parts-for-product-pipes/41094 "2026-06-24T17:41:59Z")

</div>

How would I go about making these as I am very new to this and I’m trying to get my head around designing pipe drawings for customers

---

## [First 3D product part](https://discourse.shapr3d.com/t/first-3d-product-part/41097)

<div class="topic-metadata">

**Author:** [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Replies:** 1\
**Last updated:** [June 24, 2026, 5:03pm UTC](https://discourse.shapr3d.com/t/first-3d-product-part/41097 "2026-06-24T17:03:48Z")

</div>

My first EVER 3D design was this little guy. I used Alibre, which is a program and company I loathe. I designed that case to fit a tiny circuit board I designed. It is a delayed shut down motor controller to replace a fu…

---

## [Is there anyway to create more STL controls for export? Custom is still not developed enough?](https://discourse.shapr3d.com/t/is-there-anyway-to-create-more-stl-controls-for-export-custom-is-still-not-developed-enough/41086)

<div class="topic-metadata">

**Author:** [@rt6151](https://discourse.shapr3d.com/u/rt6151)\
**Replies:** 5\
**Last updated:** [June 19, 2026, 1:22pm UTC](https://discourse.shapr3d.com/t/is-there-anyway-to-create-more-stl-controls-for-export-custom-is-still-not-developed-enough/41086 "2026-06-19T13:22:42Z")

</div>

Im really enjoying learning and using Shapr3d but he STL export controls are very crude compared to other modeling softwares. Is there any plans to improve it? For instance, when I export a model as an stl and use eithe…

---

## [I make lots of quick practical things](https://discourse.shapr3d.com/t/i-make-lots-of-quick-practical-things/41089)

<div class="topic-metadata">

**Author:** [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Replies:** 1\
**Last updated:** [June 19, 2026, 6:24am UTC](https://discourse.shapr3d.com/t/i-make-lots-of-quick-practical-things/41089 "2026-06-19T06:24:09Z")

</div>

This little plate for covering holes from a ladder mount that was removed on a clients RV. It was my first. Ten minutes and printed 6 in half hour.

---

## [Mini Ramp For Skateboarding](https://discourse.shapr3d.com/t/mini-ramp-for-skateboarding/41059)

<div class="topic-metadata">

**Author:** [@johnnryrockn](https://discourse.shapr3d.com/u/johnnryrockn)\
**Replies:** 0\
**Last updated:** [June 16, 2026, 3:09pm UTC](https://discourse.shapr3d.com/t/mini-ramp-for-skateboarding/41059 "2026-06-16T15:09:58Z")

</div>

Here is a mini ramp. Dimensions 8’W X 15’L With 6’ Radius.

---

## [Neue Tisch Idee](https://discourse.shapr3d.com/t/neue-tisch-idee/41058)

<div class="topic-metadata">

**Author:** [@Andreas](https://discourse.shapr3d.com/u/Andreas)\
**Replies:** 0\
**Last updated:** [June 16, 2026, 1:32pm UTC](https://discourse.shapr3d.com/t/neue-tisch-idee/41058 "2026-06-16T13:32:28Z")

</div>

Mit freundlichen Grüssen Andreas D. Haudenschild

---

## [Designed a Support-Free Therapy Roller in Shapr3D (Full Tutorial)](https://discourse.shapr3d.com/t/designed-a-support-free-therapy-roller-in-shapr3d-full-tutorial/40994)

<div class="topic-metadata">

**Author:** [@anon53380122](https://discourse.shapr3d.com/u/anon53380122)\
**Replies:** 0\
**Last updated:** [June 5, 2026, 9:12am UTC](https://discourse.shapr3d.com/t/designed-a-support-free-therapy-roller-in-shapr3d-full-tutorial/40994 "2026-06-05T09:12:59Z")

</div>

I recently finished designing this support-free therapy roller in Shapr3D and wanted to share the project with the community. The goal was to create a simple but effective trigger-point massage tool that could be used f…

---

## [Pizza cutter Design](https://discourse.shapr3d.com/t/pizza-cutter-design/40966)

<div class="topic-metadata">

**Author:** [@BGabor](https://discourse.shapr3d.com/u/BGabor)\
**Replies:** 0\
**Last updated:** [June 2, 2026, 8:18pm UTC](https://discourse.shapr3d.com/t/pizza-cutter-design/40966 "2026-06-02T20:18:45Z")

</div>

---

## [Bunch of decks](https://discourse.shapr3d.com/t/bunch-of-decks/40846)

<div class="topic-metadata">

**Author:** [@MichaeI](https://discourse.shapr3d.com/u/MichaeI)\
**Replies:** 6\
**Last updated:** [May 29, 2026, 4:15am UTC](https://discourse.shapr3d.com/t/bunch-of-decks/40846 "2026-05-29T04:15:36Z")

</div>

Some of them are concepts, but some of them have made it through the city and got permitted and I built them personally thank you Shapr you have no idea

---

## [My Skool Bus](https://discourse.shapr3d.com/t/my-skool-bus/40788)

<div class="topic-metadata">

**Author:** [@Mario2much](https://discourse.shapr3d.com/u/Mario2much)\
**Replies:** 0\
**Last updated:** [May 12, 2026, 4:01am UTC](https://discourse.shapr3d.com/t/my-skool-bus/40788 "2026-05-12T04:01:45Z")

</div>

---

## [My boyish truck](https://discourse.shapr3d.com/t/my-boyish-truck/40740)

<div class="topic-metadata">

**Author:** [@Mario2much](https://discourse.shapr3d.com/u/Mario2much)\
**Replies:** 2\
**Last updated:** [May 1, 2026, 4:16pm UTC](https://discourse.shapr3d.com/t/my-boyish-truck/40740 "2026-05-01T16:16:57Z")

</div>

---

## [Seeking Instructor](https://discourse.shapr3d.com/t/seeking-instructor/40719)

<div class="topic-metadata">

**Author:** [@Aero](https://discourse.shapr3d.com/u/Aero)\
**Replies:** 1\
**Last updated:** [May 1, 2026, 1:35am UTC](https://discourse.shapr3d.com/t/seeking-instructor/40719 "2026-05-01T01:35:51Z")

</div>

Hello everyone, John here, mostly happy new user! I am trudging my way through the Udemy videos and related content and mostly picking up the concepts and practice pretty quickly with an iPad and Apple Pencil. But a lo…

---

## [Arch Cased Opening](https://discourse.shapr3d.com/t/arch-cased-opening/40684)

<div class="topic-metadata">

**Author:** [@jackcady](https://discourse.shapr3d.com/u/jackcady)\
**Replies:** 0\
**Last updated:** [April 21, 2026, 1:26am UTC](https://discourse.shapr3d.com/t/arch-cased-opening/40684 "2026-04-21T01:26:10Z")

</div>

---

## [A-House full model steel wood](https://discourse.shapr3d.com/t/a-house-full-model-steel-wood/40674)

<div class="topic-metadata">

**Author:** [@Blacksmith](https://discourse.shapr3d.com/u/Blacksmith)\
**Replies:** 0\
**Last updated:** [April 18, 2026, 1:15pm UTC](https://discourse.shapr3d.com/t/a-house-full-model-steel-wood/40674 "2026-04-18T13:15:03Z")

</div>

Hello, this is an A\_Haus. I would still need furniture for it. Would anyone on this platform be willing to share parametrized chairs, a table, and a sofa? Hallo, hier ist ein A\_Haus. Ich würde noch Möbel dafür benöt…

---

## [ARGB pixel ring holder](https://discourse.shapr3d.com/t/argb-pixel-ring-holder/40647)

<div class="topic-metadata">

**Author:** [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Replies:** 3\
**Last updated:** [April 16, 2026, 12:55am UTC](https://discourse.shapr3d.com/t/argb-pixel-ring-holder/40647 "2026-04-16T00:55:10Z")

</div>

Working on several pixel ring designs . This is my latest design to help wrangle them for bread boarding my experiments. Got it right the first time thanks to Shapr. Uploaded for everyone.

[Previous page](https://discourse.shapr3d.com/c/community/50.md?page=1)

[Next page](https://discourse.shapr3d.com/c/community/50.md?page=3)