# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=100

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 101

---

## [How can I control length of extrusion afterwards?](https://discourse.shapr3d.com/t/how-can-i-control-length-of-extrusion-afterwards/31926)

<div class="topic-metadata">

**Author:** [@Mrch](https://discourse.shapr3d.com/u/Mrch)\
**Replies:** 2\
**Last updated:** [May 15, 2024, 5:40pm UTC](https://discourse.shapr3d.com/t/how-can-i-control-length-of-extrusion-afterwards/31926 "2024-05-15T17:40:23Z")

</div>

So I am making this glow stick case (long story lol) and I’m trying to change the length of the parts I already made. However as you can see from the picture the number is different and only refers to the length of the…

---

## [Simple: keyboard shortcut for "replace face" command](https://discourse.shapr3d.com/t/simple-keyboard-shortcut-for-replace-face-command/31922)

<div class="topic-metadata">

**Author:** [@Peter\_b](https://discourse.shapr3d.com/u/Peter_b)\
**Replies:** 5\
**Last updated:** [May 15, 2024, 4:08pm UTC](https://discourse.shapr3d.com/t/simple-keyboard-shortcut-for-replace-face-command/31922 "2024-05-15T16:08:03Z")

</div>

I am using the replace face command a lot. Not only that there is no shortcut key but the command is also burried under “more”. There are not many commands I use more that replace face. For me it would make a lot of sen…

---

## [Weapon concept modelling](https://discourse.shapr3d.com/t/weapon-concept-modelling/31914)

<div class="topic-metadata">

**Author:** [@RomanShmeli](https://discourse.shapr3d.com/u/RomanShmeli)\
**Replies:** 2\
**Last updated:** [May 15, 2024, 2:45pm UTC](https://discourse.shapr3d.com/t/weapon-concept-modelling/31914 "2024-05-15T14:45:08Z")

</div>

---

## [Explosion View](https://discourse.shapr3d.com/t/explosion-view/21788)

<div class="topic-metadata">

**Author:** [@whatthefilament](https://discourse.shapr3d.com/u/whatthefilament)\
**Replies:** 6\
**Last updated:** [May 15, 2024, 1:48pm UTC](https://discourse.shapr3d.com/t/explosion-view/21788 "2024-05-15T13:48:06Z")

</div>

I love Shapr3D, I’ve been using it for two years now. I’ve created many projects and appreciate the addition of visualization. It helps make my designs look good for social media posts etc. I have, up till now, been man…

---

## [Nvidia graphics card 4090](https://discourse.shapr3d.com/t/nvidia-graphics-card-4090/31911)

<div class="topic-metadata">

**Author:** [@RomanShmeli](https://discourse.shapr3d.com/u/RomanShmeli)\
**Replies:** 0\
**Last updated:** [May 15, 2024, 6:06am UTC](https://discourse.shapr3d.com/t/nvidia-graphics-card-4090/31911 "2024-05-15T06:06:38Z")

</div>

---

## [Hard surface modelling](https://discourse.shapr3d.com/t/hard-surface-modelling/31901)

<div class="topic-metadata">

**Author:** [@RomanShmeli](https://discourse.shapr3d.com/u/RomanShmeli)\
**Replies:** 0\
**Last updated:** [May 14, 2024, 8:04pm UTC](https://discourse.shapr3d.com/t/hard-surface-modelling/31901 "2024-05-14T20:04:24Z")

</div>

---

## [Pizzacutter](https://discourse.shapr3d.com/t/pizzacutter/31513)

<div class="topic-metadata">

**Author:** [@donplatti](https://discourse.shapr3d.com/u/donplatti)\
**Replies:** 2\
**Last updated:** [May 15, 2024, 5:57am UTC](https://discourse.shapr3d.com/t/pizzacutter/31513 "2024-05-15T05:57:24Z")

</div>

---

## [Arc of a specific radius issue](https://discourse.shapr3d.com/t/arc-of-a-specific-radius-issue/31905)

<div class="topic-metadata">

**Author:** [@Donnercruz](https://discourse.shapr3d.com/u/Donnercruz)\
**Replies:** 0\
**Last updated:** [May 14, 2024, 8:54pm UTC](https://discourse.shapr3d.com/t/arc-of-a-specific-radius-issue/31905 "2024-05-14T20:54:57Z")

</div>

Im trying to create a arc between two fixed points. The arc needs to have a specific radius. This is a guitar fingerboard. I worked on the bottom end of the board first, creating the two lines a specific distance from ea…

---

## [Hide/Unhide with isolate mode](https://discourse.shapr3d.com/t/hide-unhide-with-isolate-mode/31706)

<div class="topic-metadata">

**Author:** [@Do.B](https://discourse.shapr3d.com/u/Do.B)\
**Replies:** 8\
**Last updated:** [May 14, 2024, 7:02pm UTC](https://discourse.shapr3d.com/t/hide-unhide-with-isolate-mode/31706 "2024-05-14T19:02:58Z")

</div>

When something is isolated, it is currently not possible to unhide anything else. For example, if I need a Sketch, I have to disable isolation, select the necessary elements again, and then isolate. It would be more ef…

---

## [Multiple copies without deselecting](https://discourse.shapr3d.com/t/multiple-copies-without-deselecting/31769)

<div class="topic-metadata">

**Author:** [@Signpainter](https://discourse.shapr3d.com/u/Signpainter)\
**Replies:** 5\
**Last updated:** [May 14, 2024, 5:14pm UTC](https://discourse.shapr3d.com/t/multiple-copies-without-deselecting/31769 "2024-05-14T17:14:21Z")

</div>

Can someone please point me to the right tutorial or post a video here for making multiple copies without deselecting EVERY time in this new parametric horror reality? Also after the update whenever I select everything …

---

## [Is there any update to carve](https://discourse.shapr3d.com/t/is-there-any-update-to-carve/31893)

<div class="topic-metadata">

**Author:** [@Kuwshapr](https://discourse.shapr3d.com/u/Kuwshapr)\
**Replies:** 0\
**Last updated:** [May 14, 2024, 12:33pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-carve/31893 "2024-05-14T12:33:37Z")

</div>

Hello, I am trying to curve the line into a circle and extrude it. If that is impossible now, can that be part of the new update? Regard.

---

## [The hidden lines function in 2D technical drawing mode does not exist on the Mac desktop version](https://discourse.shapr3d.com/t/the-hidden-lines-function-in-2d-technical-drawing-mode-does-not-exist-on-the-mac-desktop-version/31019)

<div class="topic-metadata">

**Author:** [@AntoineD](https://discourse.shapr3d.com/u/AntoineD)\
**Replies:** 4\
**Last updated:** [May 14, 2024, 12:09pm UTC](https://discourse.shapr3d.com/t/the-hidden-lines-function-in-2d-technical-drawing-mode-does-not-exist-on-the-mac-desktop-version/31019 "2024-05-14T12:09:34Z")

</div>

Hello, I’m having a problem displaying hidden lines in 2D technical drawing mode. I can’t find this function when I’m working on a computer. On my iPad, it works perfectly. Do you have a solution please? Maybe this fu…

---

## [Body cannot be selected in isolated mode](https://discourse.shapr3d.com/t/body-cannot-be-selected-in-isolated-mode/31889)

<div class="topic-metadata">

**Author:** [@ice](https://discourse.shapr3d.com/u/ice)\
**Replies:** 1\
**Last updated:** [May 14, 2024, 10:37am UTC](https://discourse.shapr3d.com/t/body-cannot-be-selected-in-isolated-mode/31889 "2024-05-14T10:37:58Z")

</div>

the last version 5.603 at isolated mode，sketch cannot be hide，so I cannot select body

---

## [Is there any update to this insane performance degradation](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816)

<div class="topic-metadata">

**Author:** [@O24](https://discourse.shapr3d.com/u/O24)\
**Replies:** 10\
**Last updated:** [May 14, 2024, 7:04am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816 "2024-05-14T07:04:11Z")

</div>

I want to say this as politely as possible, But I’m genuinely going crazy with this new update, man I don’t care about the workflow changes or nothing but the performance degradation is too much for me to work normally f…

---

## [Mesh 3d modeling with Shapr3d](https://discourse.shapr3d.com/t/mesh-3d-modeling-with-shapr3d/22599)

<div class="topic-metadata">

**Author:** [@Cenk](https://discourse.shapr3d.com/u/Cenk)\
**Replies:** 6\
**Last updated:** [May 13, 2024, 7:46pm UTC](https://discourse.shapr3d.com/t/mesh-3d-modeling-with-shapr3d/22599 "2024-05-13T19:46:17Z")

</div>

Will land surface mesh modeling be possible with Shapr3d?

---

## [Sketching/split body with odd shapes using mesh bodies.](https://discourse.shapr3d.com/t/sketching-split-body-with-odd-shapes-using-mesh-bodies/31886)

<div class="topic-metadata">

**Author:** [@CallsignRedeye](https://discourse.shapr3d.com/u/CallsignRedeye)\
**Replies:** 0\
**Last updated:** [May 13, 2024, 6:46pm UTC](https://discourse.shapr3d.com/t/sketching-split-body-with-odd-shapes-using-mesh-bodies/31886 "2024-05-13T18:46:26Z")

</div>

I’ve recently started scanning objects to work with and can get pretty good results. I would like to design parts that augment the mesh bodies. Some features such as cutting an indention or plan around the perimeter …

---

## [Sketch smarter](https://discourse.shapr3d.com/t/sketch-smarter/31876)

<div class="topic-metadata">

**Author:** [@porat\_m](https://discourse.shapr3d.com/u/porat_m)\
**Replies:** 3\
**Last updated:** [May 13, 2024, 5:58pm UTC](https://discourse.shapr3d.com/t/sketch-smarter/31876 "2024-05-13T17:58:10Z")

</div>

Hi, I want to try sketching my furniture with consideration to the new parametric technique. (Still very confusing). Anyone help me figure out how to sketch this closet where all four “cells” marked in red to change au…

---

## [How can I made Bézier curves that are not flat?](https://discourse.shapr3d.com/t/how-can-i-made-bezier-curves-that-are-not-flat/31817)

<div class="topic-metadata">

**Author:** [@Cyre\_Sim](https://discourse.shapr3d.com/u/Cyre_Sim)\
**Replies:** 13\
**Last updated:** [May 13, 2024, 5:13pm UTC](https://discourse.shapr3d.com/t/how-can-i-made-bezier-curves-that-are-not-flat/31817 "2024-05-13T17:13:21Z")

</div>

Hello everyone, I have a desire to make some designs for sake of practice that are abstract in nature. For some of them I want to sweep along a Bézier curve but I would like the sweep path to move in all three axis (axi…

---

## [Why body also deleted when I only delete Sktech](https://discourse.shapr3d.com/t/why-body-also-deleted-when-i-only-delete-sktech/31872)

<div class="topic-metadata">

**Author:** [@llllllllllllllllilil](https://discourse.shapr3d.com/u/llllllllllllllllilil)\
**Replies:** 5\
**Last updated:** [May 13, 2024, 3:46pm UTC](https://discourse.shapr3d.com/t/why-body-also-deleted-when-i-only-delete-sktech/31872 "2024-05-13T15:46:35Z")

</div>

I only seletected the sketch and deleted. But for some reason everytime I delete Sktech the body is also deleted. I also tried trim but it didn’t worked.

---

## [Wooden product knife holders from modeling to production](https://discourse.shapr3d.com/t/wooden-product-knife-holders-from-modeling-to-production/31858)

<div class="topic-metadata">

**Author:** [@JiaPing](https://discourse.shapr3d.com/u/JiaPing)\
**Replies:** 4\
**Last updated:** [May 13, 2024, 2:30pm UTC](https://discourse.shapr3d.com/t/wooden-product-knife-holders-from-modeling-to-production/31858 "2024-05-13T14:30:59Z")

</div>

Wooden product knife holders from modeling to production At present, it has not been fully completed and will be supplemented with finished products in the future

---

## [Really need EDU license!](https://discourse.shapr3d.com/t/really-need-edu-license/31871)

<div class="topic-metadata">

**Author:** [@Masol](https://discourse.shapr3d.com/u/Masol)\
**Replies:** 3\
**Last updated:** [May 13, 2024, 9:21am UTC](https://discourse.shapr3d.com/t/really-need-edu-license/31871 "2024-05-13T09:21:00Z")

</div>

As a convenient and fully functional drawing software, it is deeply loved by educational staff and even students. I hope the educational license system will be rebuilt quickly! We really need this benefit so that we can …

---

## [Need Help, Crashed EVERY time](https://discourse.shapr3d.com/t/need-help-crashed-every-time/31665)

<div class="topic-metadata">

**Author:** [@miRNA](https://discourse.shapr3d.com/u/miRNA)\
**Replies:** 13\
**Last updated:** [May 13, 2024, 7:36am UTC](https://discourse.shapr3d.com/t/need-help-crashed-every-time/31665 "2024-05-13T07:36:07Z")

</div>

I utilized Shapr3D to construct a structure from the ground up, essentially creating a cube with an array of holes throughout. Initially, everything appeared to be in order until it unexpectedly crashed. Subsequently, wh…

---

## [Import Project-able Logo](https://discourse.shapr3d.com/t/import-project-able-logo/31818)

<div class="topic-metadata">

**Author:** [@Cyre\_Sim](https://discourse.shapr3d.com/u/Cyre_Sim)\
**Replies:** 5\
**Last updated:** [May 13, 2024, 5:23am UTC](https://discourse.shapr3d.com/t/import-project-able-logo/31818 "2024-05-13T05:23:11Z")

</div>

Hello everyone, I’ve been using Shapr3D as my first CAD program and it has been a wonderful experience. As an engineering student with business aspirations, I figure I need practice and the markets available to me right…

---

## [How to fill missing face?](https://discourse.shapr3d.com/t/how-to-fill-missing-face/31854)

<div class="topic-metadata">

**Author:** [@Liberty](https://discourse.shapr3d.com/u/Liberty)\
**Replies:** 7\
**Last updated:** [May 13, 2024, 4:55am UTC](https://discourse.shapr3d.com/t/how-to-fill-missing-face/31854 "2024-05-13T04:55:56Z")

</div>

TWIMC, I am trying to figure out how to fill in this hole that randomly appeared in my body. This was one of the first sections I worked on, and going back to re-extrude and chamfer it would be at least 4 hours lost eff…

---

## [Just an auto survey :)](https://discourse.shapr3d.com/t/just-an-auto-survey/31731)

<div class="topic-metadata">

**Author:** [@Justquestions](https://discourse.shapr3d.com/u/Justquestions)\
**Replies:** 67\
**Last updated:** [May 13, 2024, 2:07am UTC](https://discourse.shapr3d.com/t/just-an-auto-survey/31731 "2024-05-13T02:07:20Z")

</div>

Hello, I am seeing the advantages of the new update. Without a doubt, the new functions give more precision to the designs in real time. And I think the problem is in the name of this new history function. I mean this…

---

## [Face Click Measurements: A Historic Disappearance](https://discourse.shapr3d.com/t/face-click-measurements-a-historic-disappearance/31732)

<div class="topic-metadata">

**Author:** [@Do.B](https://discourse.shapr3d.com/u/Do.B)\
**Replies:** 7\
**Last updated:** [May 12, 2024, 8:22pm UTC](https://discourse.shapr3d.com/t/face-click-measurements-a-historic-disappearance/31732 "2024-05-12T20:22:06Z")

</div>

In the era before the History Based Parametric update, simplicity reigned supreme in our beloved software. A mere click on a face revealed the radius of a fillet, effortlessly providing essential measurement informati…

---

## [Alignement question](https://discourse.shapr3d.com/t/alignement-question/31861)

<div class="topic-metadata">

**Author:** [@ecreatures](https://discourse.shapr3d.com/u/ecreatures)\
**Replies:** 3\
**Last updated:** [May 12, 2024, 6:27pm UTC](https://discourse.shapr3d.com/t/alignement-question/31861 "2024-05-12T18:27:12Z")

</div>

In this case, what is the solution to align the 3 edges of my object ? i tried with a plane but it is not possible. I

---

## [Repulsine 22B made in Shapr3d Video](https://discourse.shapr3d.com/t/repulsine-22b-made-in-shapr3d-video/31860)

<div class="topic-metadata">

**Author:** [@Justquestions](https://discourse.shapr3d.com/u/Justquestions)\
**Replies:** 0\
**Last updated:** [May 12, 2024, 3:02pm UTC](https://discourse.shapr3d.com/t/repulsine-22b-made-in-shapr3d-video/31860 "2024-05-12T15:02:27Z")

</div>

Will you be willing to donate in order to buy a good 3D printer and bring this design to reality.?

---

## [Any chance of a release of the old version as a 'Legacy' version?](https://discourse.shapr3d.com/t/any-chance-of-a-release-of-the-old-version-as-a-legacy-version/31832)

<div class="topic-metadata">

**Author:** [@Simon66](https://discourse.shapr3d.com/u/Simon66)\
**Replies:** 5\
**Last updated:** [May 12, 2024, 1:38pm UTC](https://discourse.shapr3d.com/t/any-chance-of-a-release-of-the-old-version-as-a-legacy-version/31832 "2024-05-12T13:38:30Z")

</div>

Is there any chance of releasing the old version as a ‘Legacy’ version? A separate, stand alone, version of Shapr3D that could run alongside the current version? I tried loads of 3D software before choosing Shapr3D and…

---

## [Sketches disappear and delayed response](https://discourse.shapr3d.com/t/sketches-disappear-and-delayed-response/31825)

<div class="topic-metadata">

**Author:** [@Ebethscott](https://discourse.shapr3d.com/u/Ebethscott)\
**Replies:** 54\
**Last updated:** [May 12, 2024, 11:50am UTC](https://discourse.shapr3d.com/t/sketches-disappear-and-delayed-response/31825 "2024-05-12T11:50:10Z")

</div>

Sketches disappear when I create a body out of just part of the sketch, so creating multiple bodies from one sketch is impossible without going to the menu on the left to try to turn the sketch back on. Can this featur…

[Previous page](https://discourse.shapr3d.com/latest.md?page=99)

[Next page](https://discourse.shapr3d.com/latest.md?page=101)