# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=113

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 114

---

## [Can I sell 3D-Prints made with the free version?](https://discourse.shapr3d.com/t/can-i-sell-3d-prints-made-with-the-free-version/30797)

<div class="topic-metadata">

**Author:** [@AlAl](https://discourse.shapr3d.com/u/AlAl)\
**Replies:** 2\
**Last updated:** [March 15, 2024, 5:29pm UTC](https://discourse.shapr3d.com/t/can-i-sell-3d-prints-made-with-the-free-version/30797 "2024-03-15T17:29:26Z")

</div>

I’ve made some designs in the Free version of Shapr3D. My question is: Can I sell the printed versions of these designs?

---

## [Stealth Press (Heat set insert press)](https://discourse.shapr3d.com/t/stealth-press-heat-set-insert-press/30798)

<div class="topic-metadata">

**Author:** [@IconicFAB](https://discourse.shapr3d.com/u/IconicFAB)\
**Replies:** 0\
**Last updated:** [March 15, 2024, 2:43pm UTC](https://discourse.shapr3d.com/t/stealth-press-heat-set-insert-press/30798 "2024-03-15T14:43:10Z")

</div>

Stealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100/101, and Pinecil soldering irons. \[The introduction of the Dremel Add-On (Printables)\] transforms the Stealth Press into a m…

---

## [Bug: testing constraints with lines vs points](https://discourse.shapr3d.com/t/bug-testing-constraints-with-lines-vs-points/30796)

<div class="topic-metadata">

**Author:** [@masukomi](https://discourse.shapr3d.com/u/masukomi)\
**Replies:** 0\
**Last updated:** [March 15, 2024, 2:40pm UTC](https://discourse.shapr3d.com/t/bug-testing-constraints-with-lines-vs-points/30796 "2024-03-15T14:40:49Z")

</div>

Given the following sketch: Selecting the two vertical lines and specifying a distance results in a constraints error. Selecting the two points at the bottom of those lines and specifying a distance results in moving t…

---

## [Exporting USDZ to Blender with textures](https://discourse.shapr3d.com/t/exporting-usdz-to-blender-with-textures/30792)

<div class="topic-metadata">

**Author:** [@SmallPotato](https://discourse.shapr3d.com/u/SmallPotato)\
**Replies:** 0\
**Last updated:** [March 15, 2024, 12:39pm UTC](https://discourse.shapr3d.com/t/exporting-usdz-to-blender-with-textures/30792 "2024-03-15T12:39:17Z")

</div>

Hi I have been trying to get into rendering my Shapr3D designs in higher quality. I am not proficient enough in Blender yet to completely re-texture my files, so I looked for a way to keep the textures from Shapr. I am…

---

## [Issue with Drawings](https://discourse.shapr3d.com/t/issue-with-drawings/30779)

<div class="topic-metadata">

**Author:** [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Replies:** 0\
**Last updated:** [March 14, 2024, 9:08pm UTC](https://discourse.shapr3d.com/t/issue-with-drawings/30779 "2024-03-14T21:08:43Z")

</div>

I began extracting drawings for a project, utilising the landscape A3 format and with the Title Block Horizontal. There are three areas where one can write a title and subtitle, but in this view, the ability to input tex…

---

## [Shapr3D Won't Launch](https://discourse.shapr3d.com/t/shapr3d-wont-launch/30778)

<div class="topic-metadata">

**Author:** [@Dayton3D](https://discourse.shapr3d.com/u/Dayton3D)\
**Replies:** 0\
**Last updated:** [March 14, 2024, 8:55pm UTC](https://discourse.shapr3d.com/t/shapr3d-wont-launch/30778 "2024-03-14T20:55:15Z")

</div>

I just started my laptop, and Shapr3d will not launch. The icons I had on the desktop are also gone. It was just working this morning, and no changes were made to the PC. What is happening? Where are my projects?

---

## [Toggle Dimension Labels on/off](https://discourse.shapr3d.com/t/toggle-dimension-labels-on-off/30775)

<div class="topic-metadata">

**Author:** [@raytristani](https://discourse.shapr3d.com/u/raytristani)\
**Replies:** 3\
**Last updated:** [March 14, 2024, 5:35pm UTC](https://discourse.shapr3d.com/t/toggle-dimension-labels-on-off/30775 "2024-03-14T17:35:28Z")

</div>

Is there a way to toggle on/off the overload of dimension information on these sketches on a mac? It is very confusing when dealing with multiple sketches

---

## [Body below body in 2d drawing](https://discourse.shapr3d.com/t/body-below-body-in-2d-drawing/30748)

<div class="topic-metadata">

**Author:** [@Geeoob](https://discourse.shapr3d.com/u/Geeoob)\
**Replies:** 3\
**Last updated:** [March 14, 2024, 3:50pm UTC](https://discourse.shapr3d.com/t/body-below-body-in-2d-drawing/30748 "2024-03-14T15:50:05Z")

</div>

I have a drawing that has a 3dbody above another 3d body. Is there an option to allow the lines from the bottom body to be seen though the top body in a 2d drawing. (Example - a range hood with equipment under it.)

---

## [My sailboat rudder design](https://discourse.shapr3d.com/t/my-sailboat-rudder-design/30770)

<div class="topic-metadata">

**Author:** [@Ion](https://discourse.shapr3d.com/u/Ion)\
**Replies:** 5\
**Last updated:** [March 14, 2024, 10:35am UTC](https://discourse.shapr3d.com/t/my-sailboat-rudder-design/30770 "2024-03-14T10:35:21Z")

</div>

Hello everyone. This is a design of my rudder from my sailboat with the top bearing I would like to place in order to hopefully improve the stirring quality and solve some other problems along the way. I thought I’d shar…

---

## [Threaded piece and how to truly learn/unlearn](https://discourse.shapr3d.com/t/threaded-piece-and-how-to-truly-learn-unlearn/30699)

<div class="topic-metadata">

**Author:** [@shotfun](https://discourse.shapr3d.com/u/shotfun)\
**Replies:** 27\
**Last updated:** [March 14, 2024, 2:12am UTC](https://discourse.shapr3d.com/t/threaded-piece-and-how-to-truly-learn-unlearn/30699 "2024-03-14T02:12:09Z")

</div>

hey all, so what im trying to do is thread a 23mm shaft into this file here. the file is for a display and I want to be able to adjust the display height. the hole in the top of this plate is 23mm, just like the shaft. …

---

## [Just got a Magic Trackpad, can I duel wield it?](https://discourse.shapr3d.com/t/just-got-a-magic-trackpad-can-i-duel-wield-it/30771)

<div class="topic-metadata">

**Author:** [@automatom](https://discourse.shapr3d.com/u/automatom)\
**Replies:** 2\
**Last updated:** [March 14, 2024, 12:16am UTC](https://discourse.shapr3d.com/t/just-got-a-magic-trackpad-can-i-duel-wield-it/30771 "2024-03-14T00:16:02Z")

</div>

Hey everyone, so I recently got myself an apple trackpad for my iMac and was wondering if it was possible to set it up with Shapr so it works in harmony with the mouse rather than just being an imitation of it? It would …

---

## [Is there a way to separate sketches](https://discourse.shapr3d.com/t/is-there-a-way-to-separate-sketches/12125)

<div class="topic-metadata">

**Author:** [@Past1320](https://discourse.shapr3d.com/u/Past1320)\
**Replies:** 7\
**Last updated:** [March 13, 2024, 10:54pm UTC](https://discourse.shapr3d.com/t/is-there-a-way-to-separate-sketches/12125 "2024-03-13T22:54:32Z")

</div>

Is there a way to separate my sketches, I can create a sketch which is fine then I exit the sketch. Now my dilemma is when I go back to create a new sketch it keeps adding to my original sketch. How can I separate my ske…

---

## [Paint/drag Trim tool](https://discourse.shapr3d.com/t/paint-drag-trim-tool/30768)

<div class="topic-metadata">

**Author:** [@justin](https://discourse.shapr3d.com/u/justin)\
**Replies:** 2\
**Last updated:** [March 13, 2024, 10:29pm UTC](https://discourse.shapr3d.com/t/paint-drag-trim-tool/30768 "2024-03-13T22:29:13Z")

</div>

Please follow the format below for requesting a feature. The problem that this feature will solve: Trimming more than a couple of sketch pieces is tedious. Brief description of the outcomes that you expect from this f…

---

## [Show affected constraints during/before an operation](https://discourse.shapr3d.com/t/show-affected-constraints-during-before-an-operation/30769)

<div class="topic-metadata">

**Author:** [@justin](https://discourse.shapr3d.com/u/justin)\
**Replies:** 2\
**Last updated:** [March 13, 2024, 9:59pm UTC](https://discourse.shapr3d.com/t/show-affected-constraints-during-before-an-operation/30769 "2024-03-13T21:59:33Z")

</div>

Please follow the format below for requesting a feature. The problem that this feature will solve: Quite often, I’ll make a sketch, then start modifying part of it, only to find practically the entire sketch changing a…

---

## [Wings Mold](https://discourse.shapr3d.com/t/wings-mold/30735)

<div class="topic-metadata">

**Author:** [@marcoriobranco](https://discourse.shapr3d.com/u/marcoriobranco)\
**Replies:** 5\
**Last updated:** [March 13, 2024, 6:50pm UTC](https://discourse.shapr3d.com/t/wings-mold/30735 "2024-03-13T18:50:36Z")

</div>

hello everybody. I’m new here and I’m just starting out with pattern design and modeling. I would like some help on how to make a mold to glue this wing, which is made up of two pieces. Superior and inferior. I use the S…

---

## [5.570 - Tidier display filters in the History sidebar](https://discourse.shapr3d.com/t/5-570-tidier-display-filters-in-the-history-sidebar/30633)

<div class="topic-metadata">

**Author:** [@Jeriz](https://discourse.shapr3d.com/u/Jeriz)\
**Replies:** 10\
**Last updated:** [March 13, 2024, 4:22pm UTC](https://discourse.shapr3d.com/t/5-570-tidier-display-filters-in-the-history-sidebar/30633 "2024-03-13T16:22:30Z")

</div>

Manage longer lists more effortlessly in History with this new update to the sidebar: Improved: Get a tidier display when browsing through selection-based results in History with multiple unrelated steps now collapsed i…

---

## [2024 tutorials using History feature](https://discourse.shapr3d.com/t/2024-tutorials-using-history-feature/30733)

<div class="topic-metadata">

**Author:** [@Daveodr](https://discourse.shapr3d.com/u/Daveodr)\
**Replies:** 5\
**Last updated:** [March 13, 2024, 2:37pm UTC](https://discourse.shapr3d.com/t/2024-tutorials-using-history-feature/30733 "2024-03-13T14:37:51Z")

</div>

I am relatively new to Sharp 3D and trying to follow 2024 tutorial. Presenter is possibly using a Mac and, more importantly, using the History feature that is not Live yet. When can I expect this feature to go Live so …

---

## [2d drawings again](https://discourse.shapr3d.com/t/2d-drawings-again/30757)

<div class="topic-metadata">

**Author:** [@Geeoob](https://discourse.shapr3d.com/u/Geeoob)\
**Replies:** 1\
**Last updated:** [March 13, 2024, 1:03pm UTC](https://discourse.shapr3d.com/t/2d-drawings-again/30757 "2024-03-13T13:03:19Z")

</div>

Is it possible to have different scaling and 2 different drawings on the same print. Thanks

---

## [“Quick” duplicate (copy) in place no longer working](https://discourse.shapr3d.com/t/quick-duplicate-copy-in-place-no-longer-working/26542)

<div class="topic-metadata">

**Author:** [@mechstarpb](https://discourse.shapr3d.com/u/mechstarpb)\
**Replies:** 21\
**Last updated:** [March 13, 2024, 10:39am UTC](https://discourse.shapr3d.com/t/quick-duplicate-copy-in-place-no-longer-working/26542 "2024-03-13T10:39:02Z")

</div>

Shaper team, Can we get back the (little known but very useful) copy in place shortcut? This allowed us to create a duplicate copy of bodies(s) without having to move the copy, deselect the copy badge, then move the du…

---

## [Opening certain project crashes app](https://discourse.shapr3d.com/t/opening-certain-project-crashes-app/27595)

<div class="topic-metadata">

**Author:** [@pjb108](https://discourse.shapr3d.com/u/pjb108)\
**Replies:** 2\
**Last updated:** [March 13, 2024, 6:58am UTC](https://discourse.shapr3d.com/t/opening-certain-project-crashes-app/27595 "2024-03-13T06:58:58Z")

</div>

Error only occurs with one file. Steps: Double Click, tessellation OK! Updating Sketch plane 0/2 OK! Updating sketch plane 1/2 after few moments then crashes. Troubleshooting: Rename file - still crashing after openi…

---

## [Lock button inconsistencies](https://discourse.shapr3d.com/t/lock-button-inconsistencies/30685)

<div class="topic-metadata">

**Author:** [@BooleanUnion814Local](https://discourse.shapr3d.com/u/BooleanUnion814Local)\
**Replies:** 1\
**Last updated:** [March 12, 2024, 9:12pm UTC](https://discourse.shapr3d.com/t/lock-button-inconsistencies/30685 "2024-03-12T21:12:39Z")

</div>

I believe that I posted this in January but no longer see the post at all. My account has no record of it, I have no pending post. It was long and detailed. Long post short: The button that appears to lock a sketch or o…

---

## [Selection Tools and Shortcuts missing](https://discourse.shapr3d.com/t/selection-tools-and-shortcuts-missing/30742)

<div class="topic-metadata">

**Author:** [@ChrislMod](https://discourse.shapr3d.com/u/ChrislMod)\
**Replies:** 1\
**Last updated:** [March 12, 2024, 8:34pm UTC](https://discourse.shapr3d.com/t/selection-tools-and-shortcuts-missing/30742 "2024-03-12T20:34:07Z")

</div>

Basically, I think this application is really strong and the handling and design are also very good for me. But what I “painfully” miss in the truest sense are “selection tools” or commands in form of shortcuts. It is in…

---

## [Sketching/modeling problem. Finding the midpoint of an edge, etc.](https://discourse.shapr3d.com/t/sketching-modeling-problem-finding-the-midpoint-of-an-edge-etc/30564)

<div class="topic-metadata">

**Author:** [@Imaconvert](https://discourse.shapr3d.com/u/Imaconvert)\
**Replies:** 5\
**Last updated:** [March 12, 2024, 6:11pm UTC](https://discourse.shapr3d.com/t/sketching-modeling-problem-finding-the-midpoint-of-an-edge-etc/30564 "2024-03-12T18:11:07Z")

</div>

I am designing a hanging planter, so this will be a hollow shape eventually. I started by making a nine sided polygon, and extruding it upward and outward. The planter will hang from the center point of three of the nine…

---

## [WEBSITE INTEGRATION](https://discourse.shapr3d.com/t/website-integration/30743)

<div class="topic-metadata">

**Author:** [@Rod.10surboards](https://discourse.shapr3d.com/u/Rod.10surboards)\
**Replies:** 0\
**Last updated:** [March 12, 2024, 4:59pm UTC](https://discourse.shapr3d.com/t/website-integration/30743 "2024-03-12T16:59:23Z")

</div>

Hi guys, Hope you are all doing great. Is there any way that I can incorporate a surfboard simuliation engine to your tools? Thanks, Rodrigo Pereira

---

## [What does red mean?](https://discourse.shapr3d.com/t/what-does-red-mean/30716)

<div class="topic-metadata">

**Author:** [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Replies:** 4\
**Last updated:** [March 12, 2024, 10:15am UTC](https://discourse.shapr3d.com/t/what-does-red-mean/30716 "2024-03-12T10:15:20Z")

</div>

I see that from time to time but don’t know what does it mean.

---

## [Hide icon not showing](https://discourse.shapr3d.com/t/hide-icon-not-showing/30724)

<div class="topic-metadata">

**Author:** [@Chanko](https://discourse.shapr3d.com/u/Chanko)\
**Replies:** 1\
**Last updated:** [March 11, 2024, 8:08am UTC](https://discourse.shapr3d.com/t/hide-icon-not-showing/30724 "2024-03-11T08:08:55Z")

</div>

After placing some bodies in a sub folder the hide body eye icon does not appear, only for the whole folder. And in other folders only one body has the eye icon and not others. I want to be able to hide or unhide specif…

---

## [Architecture working group](https://discourse.shapr3d.com/t/architecture-working-group/30723)

<div class="topic-metadata">

**Author:** [@siris](https://discourse.shapr3d.com/u/siris)\
**Replies:** 0\
**Last updated:** [March 11, 2024, 7:58am UTC](https://discourse.shapr3d.com/t/architecture-working-group/30723 "2024-03-11T07:58:44Z")

</div>

Shapr3d is so close to being a fully functional architecture tool I get frustrated every time I have to go to revit and autocad. Anyway we can form an architectural group to focus on functionality and features needed to…

---

## [IPAD gui functionality](https://discourse.shapr3d.com/t/ipad-gui-functionality/30721)

<div class="topic-metadata">

**Author:** [@siris](https://discourse.shapr3d.com/u/siris)\
**Replies:** 0\
**Last updated:** [March 11, 2024, 7:42am UTC](https://discourse.shapr3d.com/t/ipad-gui-functionality/30721 "2024-03-11T07:42:49Z")

</div>

Anyway we can get the option to have the undo button in the upper left corner? I, and most people, spend countless hours with the IPAD on my lap and chest. Doing undos/redo with my left thumb, and other common tool fun…

---

## [iphone holder ](https://discourse.shapr3d.com/t/iphone-holder/30706)

<div class="topic-metadata">

**Author:** [@thecreatorcat](https://discourse.shapr3d.com/u/thecreatorcat)\
**Replies:** 1\
**Last updated:** [March 11, 2024, 6:43am UTC](https://discourse.shapr3d.com/t/iphone-holder/30706 "2024-03-11T06:43:02Z")

</div>

not sure if it will work for newer phones but probably will for older most older models yet still printing it even tho it is quite small.

---

## [Custom light source definitions](https://discourse.shapr3d.com/t/custom-light-source-definitions/30719)

<div class="topic-metadata">

**Author:** [@jomiller48](https://discourse.shapr3d.com/u/jomiller48)\
**Replies:** 0\
**Last updated:** [March 10, 2024, 11:49pm UTC](https://discourse.shapr3d.com/t/custom-light-source-definitions/30719 "2024-03-10T23:49:58Z")

</div>

When using Shapr3D for doing building layout and planning it would be helpful to be able to define light sources within the scene. It would be useful for helping to design light placement within the construction prior t…

[Previous page](https://discourse.shapr3d.com/latest.md?page=112)

[Next page](https://discourse.shapr3d.com/latest.md?page=114)