# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=172

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 173

---

## [Import should name the newly created design](https://discourse.shapr3d.com/t/import-should-name-the-newly-created-design/25086)

<div class="topic-metadata">

**Author:** [@MyChaOS](https://discourse.shapr3d.com/u/MyChaOS)\
**Replies:** 0\
**Last updated:** [April 1, 2023, 2:30pm UTC](https://discourse.shapr3d.com/t/import-should-name-the-newly-created-design/25086 "2023-04-01T14:30:44Z")

</div>

The problem that this feature will solve: When you import a file (e.g. \*.step) form the main Screen the design gets no name, it would be almost always a bertter guess to name the import after the imported file, instead …

---

## [Request for Dedicated Battery Saver Mode](https://discourse.shapr3d.com/t/request-for-dedicated-battery-saver-mode/25077)

<div class="topic-metadata">

**Author:** [@Bracken](https://discourse.shapr3d.com/u/Bracken)\
**Replies:** 1\
**Last updated:** [April 1, 2023, 2:28pm UTC](https://discourse.shapr3d.com/t/request-for-dedicated-battery-saver-mode/25077 "2023-04-01T14:28:06Z")

</div>

Hello Shapr3D community members, I am requesting a dedicated Battery Saver mode with a toggle switch on the settings page. There should be a switch dedicated for a “Battery Saver” mode. Especially for mobile devices. As…

---

## [Question about pen drawing](https://discourse.shapr3d.com/t/question-about-pen-drawing/25076)

<div class="topic-metadata">

**Author:** [@Arch](https://discourse.shapr3d.com/u/Arch)\
**Replies:** 1\
**Last updated:** [April 1, 2023, 5:01am UTC](https://discourse.shapr3d.com/t/question-about-pen-drawing/25076 "2023-04-01T05:01:22Z")

</div>

Does the pen work on Windows or only on the iPad?

---

## [Linear pattern with fillet - any good practice?](https://discourse.shapr3d.com/t/linear-pattern-with-fillet-any-good-practice/25058)

<div class="topic-metadata">

**Author:** [@schlank](https://discourse.shapr3d.com/u/schlank)\
**Replies:** 2\
**Last updated:** [March 30, 2023, 11:28pm UTC](https://discourse.shapr3d.com/t/linear-pattern-with-fillet-any-good-practice/25058 "2023-03-30T23:28:28Z")

</div>

Hello! I want to have pattern with fillets. I cannot make fillets in sketches, so I need to add them in the actual element. This already has some disadvantages. But these elements cannot be multiplied in a linear patt…

---

## [Shapr3d .exe link to Razer Synapse](https://discourse.shapr3d.com/t/shapr3d-exe-link-to-razer-synapse/20984)

<div class="topic-metadata">

**Author:** [@Barryd](https://discourse.shapr3d.com/u/Barryd)\
**Replies:** 1\
**Last updated:** [March 30, 2023, 11:40pm UTC](https://discourse.shapr3d.com/t/shapr3d-exe-link-to-razer-synapse/20984 "2023-03-30T23:40:38Z")

</div>

Evening. I want setup my Razer Game pad and Mouse to work with the Razer Synapse software so that the Razer profile open automatically when I open Shapr3d but I can not find the shapr3d .exe file to link with the Razer p…

---

## [Installation fails](https://discourse.shapr3d.com/t/installation-fails/25052)

<div class="topic-metadata">

**Author:** [@scarr](https://discourse.shapr3d.com/u/scarr)\
**Replies:** 1\
**Last updated:** [March 30, 2023, 2:45pm UTC](https://discourse.shapr3d.com/t/installation-fails/25052 "2023-03-30T14:45:03Z")

</div>

When I try to install (see pictures) I get an error box and the installation stops.

---

## [Export STL in size...Open in 3D Printer software as another](https://discourse.shapr3d.com/t/export-stl-in-size-open-in-3d-printer-software-as-another/1542)

<div class="topic-metadata">

**Author:** [@pmdillon](https://discourse.shapr3d.com/u/pmdillon)\
**Replies:** 5\
**Last updated:** [March 30, 2023, 7:09am UTC](https://discourse.shapr3d.com/t/export-stl-in-size-open-in-3d-printer-software-as-another/1542 "2023-03-30T07:09:48Z")

</div>

I made something on Shapr3D…set unit to inches, made it (3inch x 3inch), exported it. Imported it to my 3D printer software (Repetier) and it was so tiny I had to scale it 25x to get it to about the right size. Any ide…

---

## [Let Shapr3D onto Oculus environment](https://discourse.shapr3d.com/t/let-shapr3d-onto-oculus-environment/24957)

<div class="topic-metadata">

**Author:** [@eugenebox](https://discourse.shapr3d.com/u/eugenebox)\
**Replies:** 3\
**Last updated:** [March 30, 2023, 5:10am UTC](https://discourse.shapr3d.com/t/let-shapr3d-onto-oculus-environment/24957 "2023-03-30T05:10:10Z")

</div>

Meta worlds are empty without free creators. Best wishes.

---

## [Car body 3.0](https://discourse.shapr3d.com/t/car-body-3-0/25015)

<div class="topic-metadata">

**Author:** [@RossiWu](https://discourse.shapr3d.com/u/RossiWu)\
**Replies:** 2\
**Last updated:** [March 29, 2023, 5:37am UTC](https://discourse.shapr3d.com/t/car-body-3-0/25015 "2023-03-29T05:37:49Z")

</div>

Mid-body & front leaf board completed :arrow\_down::arrow\_down::arrow\_down: I hope that in the future, there will be curved surface functions to make complex curved surfaces faster and more controllable.

---

## [Migrate Fusion 360 designs to Shapr3d?](https://discourse.shapr3d.com/t/migrate-fusion-360-designs-to-shapr3d/25010)

<div class="topic-metadata">

**Author:** [@uilleann](https://discourse.shapr3d.com/u/uilleann)\
**Replies:** 1\
**Last updated:** [March 28, 2023, 7:32pm UTC](https://discourse.shapr3d.com/t/migrate-fusion-360-designs-to-shapr3d/25010 "2023-03-28T19:32:04Z")

</div>

I have about 3 years ofd using Fusion 360 for 3D designs to be 3D printed to sell in my etsy stores. At first I got away with a free license but they changed policies and I had to buy a license. It is up for renewal in…

---

## [Conical Spring not so conical](https://discourse.shapr3d.com/t/conical-spring-not-so-conical/24970)

<div class="topic-metadata">

**Author:** [@Jim2](https://discourse.shapr3d.com/u/Jim2)\
**Replies:** 3\
**Last updated:** [March 28, 2023, 4:21pm UTC](https://discourse.shapr3d.com/t/conical-spring-not-so-conical/24970 "2023-03-28T16:21:32Z")

</div>

Teaching myself Shapr3D using the incomplete version and I must say I am impressed…nicely done Shapr3d Team. I want to create a conical spring…but it’s not working. I’ve watched several tutorials and done everything ste…

---

## [Workflow between SketchUp model exported to Shapr3D and +morpholio trace](https://discourse.shapr3d.com/t/workflow-between-sketchup-model-exported-to-shapr3d-and-morpholio-trace/25012)

<div class="topic-metadata">

**Author:** [@Saddam](https://discourse.shapr3d.com/u/Saddam)\
**Replies:** 2\
**Last updated:** [March 28, 2023, 9:24am UTC](https://discourse.shapr3d.com/t/workflow-between-sketchup-model-exported-to-shapr3d-and-morpholio-trace/25012 "2023-03-28T09:24:43Z")

</div>

’ I have uploaded the following to images of my workflow I have an educational version of Shapr3D In my workflow I wanted to make a sectional view which I wanted to then detail out in morpholio trace But as soon…

---

## [Embedding the tutorial videos from Shapr3D YouTube channel into the app for easy access](https://discourse.shapr3d.com/t/embedding-the-tutorial-videos-from-shapr3d-youtube-channel-into-the-app-for-easy-access/25013)

<div class="topic-metadata">

**Author:** [@Bracken](https://discourse.shapr3d.com/u/Bracken)\
**Replies:** 0\
**Last updated:** [March 28, 2023, 6:51am UTC](https://discourse.shapr3d.com/t/embedding-the-tutorial-videos-from-shapr3d-youtube-channel-into-the-app-for-easy-access/25013 "2023-03-28T06:51:54Z")

</div>

Embedding the 20 manual tutorial videos from Shapr3D YouTube channel into the app for easy access. This will provide a more straightforward and comprehensive experience for a self help solution. I would suggest that this…

---

## [Are these lines connected or what? cnc/shapr/fusion360](https://discourse.shapr3d.com/t/are-these-lines-connected-or-what-cnc-shapr-fusion360/24933)

<div class="topic-metadata">

**Author:** [@shotfun](https://discourse.shapr3d.com/u/shotfun)\
**Replies:** 2\
**Last updated:** [March 28, 2023, 6:50am UTC](https://discourse.shapr3d.com/t/are-these-lines-connected-or-what-cnc-shapr-fusion360/24933 "2023-03-28T06:50:30Z")

</div>

Hey All, im coming up on a strange issue that maybe someone could help me with. ive created a project in shapr and I sent it over to fusion 360 to create some tool paths for my cnc router. when I go to create my engrav…

---

## [A fine thin curve on the outer edges only](https://discourse.shapr3d.com/t/a-fine-thin-curve-on-the-outer-edges-only/24989)

<div class="topic-metadata">

**Author:** [@Christin83](https://discourse.shapr3d.com/u/Christin83)\
**Replies:** 3\
**Last updated:** [March 27, 2023, 6:40pm UTC](https://discourse.shapr3d.com/t/a-fine-thin-curve-on-the-outer-edges-only/24989 "2023-03-27T18:40:13Z")

</div>

Dear community, On the edges of a table I want them to go up just a little bit but curvy and smooth. In the middle of the table it should be flat then going further out it should make a slight curve up. But it should be…

---

## [Engine (some new details)](https://discourse.shapr3d.com/t/engine-some-new-details/24994)

<div class="topic-metadata">

**Author:** [@TekHazrd](https://discourse.shapr3d.com/u/TekHazrd)\
**Replies:** 1\
**Last updated:** [March 27, 2023, 4:15pm UTC](https://discourse.shapr3d.com/t/engine-some-new-details/24994 "2023-03-27T16:15:44Z")

</div>

---

## [Oblique cone](https://discourse.shapr3d.com/t/oblique-cone/24980)

<div class="topic-metadata">

**Author:** [@Mohsen1](https://discourse.shapr3d.com/u/Mohsen1)\
**Replies:** 5\
**Last updated:** [March 27, 2023, 3:03pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980 "2023-03-27T15:03:37Z")

</div>

I need to draw an oblique cone while keeping the base is circle as it should be but it did not work

---

## [5.340 - Add images to your 2D Drawings](https://discourse.shapr3d.com/t/5-340-add-images-to-your-2d-drawings/24833)

<div class="topic-metadata">

**Author:** [@PeterLevay\_Shapr3D](https://discourse.shapr3d.com/u/PeterLevay_Shapr3D)\
**Replies:** 0\
**Last updated:** [March 27, 2023, 2:47pm UTC](https://discourse.shapr3d.com/t/5-340-add-images-to-your-2d-drawings/24833 "2023-03-27T14:47:43Z")

</div>

Use images to create even more expressive 2D Drawings, and make your way around in Shapr3D faster than before. New: You can now add images to your 2D Drawings, so you can easily include screenshots of your visualized …

---

## ["Rotate Around Axis" freezes Shapr3D but only on PC](https://discourse.shapr3d.com/t/rotate-around-axis-freezes-shapr3d-but-only-on-pc/24996)

<div class="topic-metadata">

**Author:** [@taumoeba](https://discourse.shapr3d.com/u/taumoeba)\
**Replies:** 3\
**Last updated:** [March 27, 2023, 6:39am UTC](https://discourse.shapr3d.com/t/rotate-around-axis-freezes-shapr3d-but-only-on-pc/24996 "2023-03-27T06:39:19Z")

</div>

I’ve been using Shapr3D mostly on iPad and occasionally on PC. I’ve never had any problems with the “Rotate Around Axis” tool on iPad, but whenever I use it on PC the entire program freezes for anywhere from a few second…

---

## [Post editing capabilities?](https://discourse.shapr3d.com/t/post-editing-capabilities/24984)

<div class="topic-metadata">

**Author:** [@Kevyk](https://discourse.shapr3d.com/u/Kevyk)\
**Replies:** 6\
**Last updated:** [March 26, 2023, 9:28pm UTC](https://discourse.shapr3d.com/t/post-editing-capabilities/24984 "2023-03-26T21:28:13Z")

</div>

I am familiar with fusion 360 and it’s timeline and post editing capabilities. Once a complex body has been designed, is there a way to go back and edit any aspect of it? No timeline either? Thank you.

---

## [Operation field rounder corners](https://discourse.shapr3d.com/t/operation-field-rounder-corners/24952)

<div class="topic-metadata">

**Author:** [@Christin83](https://discourse.shapr3d.com/u/Christin83)\
**Replies:** 2\
**Last updated:** [March 26, 2023, 7:57pm UTC](https://discourse.shapr3d.com/t/operation-field-rounder-corners/24952 "2023-03-26T19:57:40Z")

</div>

Dear community, I would like to make the corners rounder… can I still do this? I always get the message blended not possible and … operation failed See screenshot

---

## [Dimensions Tool](https://discourse.shapr3d.com/t/dimensions-tool/24978)

<div class="topic-metadata">

**Author:** [@eeek](https://discourse.shapr3d.com/u/eeek)\
**Replies:** 4\
**Last updated:** [March 26, 2023, 5:59pm UTC](https://discourse.shapr3d.com/t/dimensions-tool/24978 "2023-03-26T17:59:38Z")

</div>

Adding a dimension tool like fusion360 dimension tool. This will eliminate the need to use lines to locate objects in the sketch like centers of circles, distances between lines. Currently to locate a circle you have to …

---

## [Organic shapes can anyone give guidance](https://discourse.shapr3d.com/t/organic-shapes-can-anyone-give-guidance/9017)

<div class="topic-metadata">

**Author:** [@Jayemery](https://discourse.shapr3d.com/u/Jayemery)\
**Replies:** 19\
**Last updated:** [March 26, 2023, 12:53pm UTC](https://discourse.shapr3d.com/t/organic-shapes-can-anyone-give-guidance/9017 "2023-03-26T12:53:55Z")

</div>

Hope someone could help give guidance on how I should go about re creating one of my wood fired ovens in 3ds Please see pic For ref this oven is 1250 mm front to back 1080 at it’s widest point It’s 1m across the fron…

---

## [Every time I select a assembly in my design I get the spinning beach ball of death for about 1-2min before I can move on](https://discourse.shapr3d.com/t/every-time-i-select-a-assembly-in-my-design-i-get-the-spinning-beach-ball-of-death-for-about-1-2min-before-i-can-move-on/24949)

<div class="topic-metadata">

**Author:** [@cbSTI](https://discourse.shapr3d.com/u/cbSTI)\
**Replies:** 9\
**Last updated:** [March 24, 2023, 10:32pm UTC](https://discourse.shapr3d.com/t/every-time-i-select-a-assembly-in-my-design-i-get-the-spinning-beach-ball-of-death-for-about-1-2min-before-i-can-move-on/24949 "2023-03-24T22:32:57Z")

</div>

I am running the latest beta release (5.340.0 (4957)) on both my iPad (8th gen) and MacBook Pro (15" 2016). Now what version I’m running doesn’t really seem to matter much as I have been having this issue for months now…

---

## [Detailing Distances Between Sketch Planes](https://discourse.shapr3d.com/t/detailing-distances-between-sketch-planes/24950)

<div class="topic-metadata">

**Author:** [@CannaSoftware](https://discourse.shapr3d.com/u/CannaSoftware)\
**Replies:** 0\
**Last updated:** [March 24, 2023, 9:09pm UTC](https://discourse.shapr3d.com/t/detailing-distances-between-sketch-planes/24950 "2023-03-24T21:09:44Z")

</div>

Please follow the format below for requesting a feature. Since Sketch Planes are relative, it would help assure that they are where we think they are. Right now we have to actively select SP to determine if they are off…

---

## [Strange behavior of shapes after substraction](https://discourse.shapr3d.com/t/strange-behavior-of-shapes-after-substraction/24917)

<div class="topic-metadata">

**Author:** [@Nando](https://discourse.shapr3d.com/u/Nando)\
**Replies:** 8\
**Last updated:** [March 24, 2023, 3:09pm UTC](https://discourse.shapr3d.com/t/strange-behavior-of-shapes-after-substraction/24917 "2023-03-24T15:09:46Z")

</div>

Hey, I hope someone can help me. When I substract one object from another, sometimes the created body behaves strange, when I go to Sketch Mode. In my example below I substracted a cylinder from a block. pretty simple.…

---

## [5.330 - Model more seamlessly with a major performance boost](https://discourse.shapr3d.com/t/5-330-model-more-seamlessly-with-a-major-performance-boost/24528)

<div class="topic-metadata">

**Author:** [@Jeriz](https://discourse.shapr3d.com/u/Jeriz)\
**Replies:** 1\
**Last updated:** [March 24, 2023, 2:08pm UTC](https://discourse.shapr3d.com/t/5-330-model-more-seamlessly-with-a-major-performance-boost/24528 "2023-03-24T14:08:47Z")

</div>

Speed up your workflow with an upgraded system performance, and an enhancement boosting measurements. Improved: Editing larger models has become significantly faster and smoother, ensuring a more seamless workflow. I…

---

## [Delete multiple 2D drawings at once](https://discourse.shapr3d.com/t/delete-multiple-2d-drawings-at-once/24943)

<div class="topic-metadata">

**Author:** [@CdJ](https://discourse.shapr3d.com/u/CdJ)\
**Replies:** 0\
**Last updated:** [March 24, 2023, 12:35pm UTC](https://discourse.shapr3d.com/t/delete-multiple-2d-drawings-at-once/24943 "2023-03-24T12:35:52Z")

</div>

Currently choosing “2D Drawings” you are showen a (long) list of 2D drawing files. If you want to delete multiple drawings it is a nightmare. You have to select each individual file and then delete it. I request to have…

---

## [I made this and can not figure out how](https://discourse.shapr3d.com/t/i-made-this-and-can-not-figure-out-how/24942)

<div class="topic-metadata">

**Author:** [@Blskn](https://discourse.shapr3d.com/u/Blskn)\
**Replies:** 1\
**Last updated:** [March 24, 2023, 10:19am UTC](https://discourse.shapr3d.com/t/i-made-this-and-can-not-figure-out-how/24942 "2023-03-24T10:19:45Z")

</div>

I made this model and I really like it however I can not remember nor figure out how I made this Could someone please help

---

## [How to construct this curved arms chair's back?](https://discourse.shapr3d.com/t/how-to-construct-this-curved-arms-chairs-back/24927)

<div class="topic-metadata">

**Author:** [@kurtz](https://discourse.shapr3d.com/u/kurtz)\
**Replies:** 2\
**Last updated:** [March 24, 2023, 8:06am UTC](https://discourse.shapr3d.com/t/how-to-construct-this-curved-arms-chairs-back/24927 "2023-03-24T08:06:29Z")

</div>

Hello everyone, i am using Shapr3D for a while now and i am really fascinated by the easy of this awesome program. For learning i watched most of the official tutorials on shapr3d.com. At our home we have this chair (se…

[Previous page](https://discourse.shapr3d.com/latest.md?page=171)

[Next page](https://discourse.shapr3d.com/latest.md?page=173)