# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=187

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 188

---

## [Unable To Remove Odd Flaw In Wireframe](https://discourse.shapr3d.com/t/unable-to-remove-odd-flaw-in-wireframe/23495)

<div class="topic-metadata">

**Author:** [@falkenavionics](https://discourse.shapr3d.com/u/falkenavionics)\
**Replies:** 14\
**Last updated:** [January 11, 2023, 3:23pm UTC](https://discourse.shapr3d.com/t/unable-to-remove-odd-flaw-in-wireframe/23495 "2023-01-11T15:23:53Z")

</div>

I’ve somehow ended up with a small glitch in one of my models. It’s generally harmless, but is preventing me from adding (union) a boss to the main part. Here’s a picture of the glitch from the inside of the model: A…

---

## [Section view zoom problem](https://discourse.shapr3d.com/t/section-view-zoom-problem/23528)

<div class="topic-metadata">

**Author:** [@Bumbaboy](https://discourse.shapr3d.com/u/Bumbaboy)\
**Replies:** 1\
**Last updated:** [January 11, 2023, 10:22am UTC](https://discourse.shapr3d.com/t/section-view-zoom-problem/23528 "2023-01-11T10:22:59Z")

</div>

When i use Section view and zoom in, the Section view is displayed without any infill Wich makes it hard to see what is what. Zoomen in: Latest Shapr3D iPad Pro M2

---

## [Imported image disappearing](https://discourse.shapr3d.com/t/imported-image-disappearing/23521)

<div class="topic-metadata">

**Author:** [@Duder](https://discourse.shapr3d.com/u/Duder)\
**Replies:** 7\
**Last updated:** [January 11, 2023, 3:53am UTC](https://discourse.shapr3d.com/t/imported-image-disappearing/23521 "2023-01-11T03:53:04Z")

</div>

Mac OS 13.1, Shapr 5.28.4 (tried previous version too) When I imported an image to trace, it was fine. I traced, did a revolve, and then the image is gone. Well it’s there but I cant see it. 100% opacity, isolation mode…

---

## [Clearance for for 3D printing](https://discourse.shapr3d.com/t/clearance-for-for-3d-printing/23514)

<div class="topic-metadata">

**Author:** [@JNel](https://discourse.shapr3d.com/u/JNel)\
**Replies:** 4\
**Last updated:** [January 10, 2023, 5:57pm UTC](https://discourse.shapr3d.com/t/clearance-for-for-3d-printing/23514 "2023-01-10T17:57:53Z")

</div>

I would like to get a suggestion for the clearance necessary for parts that I would like to 3D print. These parts must fit with a small tolerance. For Example: A shaft with a diameter of 10mm must fit into a hole tha…

---

## [Motion dependancies (hierarchical: parent,child)](https://discourse.shapr3d.com/t/motion-dependancies-hierarchical-parent-child/23374)

<div class="topic-metadata">

**Author:** [@PencilofDoom](https://discourse.shapr3d.com/u/PencilofDoom)\
**Replies:** 5\
**Last updated:** [January 10, 2023, 4:34pm UTC](https://discourse.shapr3d.com/t/motion-dependancies-hierarchical-parent-child/23374 "2023-01-10T16:34:49Z")

</div>

How are relationships between two or more objects established and defined? How is a hierarchy created for these relationships, so that compound systems of linked objects move in a logical, user-defined manner? To use hum…

---

## ["Shapr3D Beta Beta" Beta is expired](https://discourse.shapr3d.com/t/shapr3d-beta-beta-beta-is-expired/23512)

<div class="topic-metadata">

**Author:** [@deets](https://discourse.shapr3d.com/u/deets)\
**Replies:** 3\
**Last updated:** [January 10, 2023, 1:48pm UTC](https://discourse.shapr3d.com/t/shapr3d-beta-beta-beta-is-expired/23512 "2023-01-10T13:48:45Z")

</div>

I’m trying to use Shapr3D on an old iPad that I haven’t used in a while. It has iPad OS 15.5, and I freshly installed Shapr3D after the error message shown in my subject. It continues to show the error-message when attem…

---

## [Background color in 2D drawings](https://discourse.shapr3d.com/t/background-color-in-2d-drawings/23508)

<div class="topic-metadata">

**Author:** [@benaston](https://discourse.shapr3d.com/u/benaston)\
**Replies:** 1\
**Last updated:** [January 10, 2023, 10:31am UTC](https://discourse.shapr3d.com/t/background-color-in-2d-drawings/23508 "2023-01-10T10:31:56Z")

</div>

The background of 2D drawings should be white, not an off-white. Alternatively enable a transparent background option.

---

## ["Film mode" in visualization mode](https://discourse.shapr3d.com/t/film-mode-in-visualization-mode/23507)

<div class="topic-metadata">

**Author:** [@benaston](https://discourse.shapr3d.com/u/benaston)\
**Replies:** 1\
**Last updated:** [January 10, 2023, 10:29am UTC](https://discourse.shapr3d.com/t/film-mode-in-visualization-mode/23507 "2023-01-10T10:29:34Z")

</div>

You should be able to configure a camera path with acceleration curves, and then run a recording of the camera moving around a visualization.

---

## [Light source UI should "always" be visible](https://discourse.shapr3d.com/t/light-source-ui-should-always-be-visible/23506)

<div class="topic-metadata">

**Author:** [@benaston](https://discourse.shapr3d.com/u/benaston)\
**Replies:** 1\
**Last updated:** [January 10, 2023, 10:28am UTC](https://discourse.shapr3d.com/t/light-source-ui-should-always-be-visible/23506 "2023-01-10T10:28:54Z")

</div>

In visualization mode, controls for positioning the light source (and possibly otherwise manipulating strength, count etc) should always be available without having to click into a tab.

---

## [Automate continuity between NURBs](https://discourse.shapr3d.com/t/automate-continuity-between-nurbs/23505)

<div class="topic-metadata">

**Author:** [@benaston](https://discourse.shapr3d.com/u/benaston)\
**Replies:** 3\
**Last updated:** [January 10, 2023, 10:28am UTC](https://discourse.shapr3d.com/t/automate-continuity-between-nurbs/23505 "2023-01-10T10:28:09Z")

</div>

Oftentimes I have two complex surfaces and want press a button to construct a smooth continuous transition between them (not just a bevel or chamfer). I know other apps have a related mechanism, but haven’t found it in …

---

## [Boolean failed upon Union](https://discourse.shapr3d.com/t/boolean-failed-upon-union/5185)

<div class="topic-metadata">

**Author:** [@gtrst](https://discourse.shapr3d.com/u/gtrst)\
**Replies:** 5\
**Last updated:** [January 10, 2023, 7:14am UTC](https://discourse.shapr3d.com/t/boolean-failed-upon-union/5185 "2023-01-10T07:14:30Z")

</div>

https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/921cdbb635d24ca7477494c1a10a3719c47c0f5f.MOV I’m trying to combine al…

---

## [Is there a way to align a sketch to the grid?](https://discourse.shapr3d.com/t/is-there-a-way-to-align-a-sketch-to-the-grid/23496)

<div class="topic-metadata">

**Author:** [@Jason42](https://discourse.shapr3d.com/u/Jason42)\
**Replies:** 2\
**Last updated:** [January 10, 2023, 6:37am UTC](https://discourse.shapr3d.com/t/is-there-a-way-to-align-a-sketch-to-the-grid/23496 "2023-01-10T06:37:45Z")

</div>

I’d like to align a sketch object to the grid, but it seems impossible. Does any one know how this is done?

---

## [Pond design](https://discourse.shapr3d.com/t/pond-design/23482)

<div class="topic-metadata">

**Author:** [@TomA](https://discourse.shapr3d.com/u/TomA)\
**Replies:** 8\
**Last updated:** [January 10, 2023, 6:31am UTC](https://discourse.shapr3d.com/t/pond-design/23482 "2023-01-10T06:31:35Z")

</div>

Hi All, I’ve just started using Shapr3d never used a graphics software before. Trying to help my garden design business with 3d imagery. This is one I’ve just finished My creation The pond in real life we’ve constru…

---

## [I use shapr3d for interior design. no-3](https://discourse.shapr3d.com/t/i-use-shapr3d-for-interior-design-no-3/23273)

<div class="topic-metadata">

**Author:** [@yongyong](https://discourse.shapr3d.com/u/yongyong)\
**Replies:** 3\
**Last updated:** [January 9, 2023, 11:50pm UTC](https://discourse.shapr3d.com/t/i-use-shapr3d-for-interior-design-no-3/23273 "2023-01-09T23:50:57Z")

</div>

This is an image of a project in progress

---

## [2D drawings update](https://discourse.shapr3d.com/t/2d-drawings-update/23081)

<div class="topic-metadata">

**Author:** [@FWP](https://discourse.shapr3d.com/u/FWP)\
**Replies:** 3\
**Last updated:** [January 9, 2023, 9:54pm UTC](https://discourse.shapr3d.com/t/2d-drawings-update/23081 "2023-01-09T21:54:29Z")

</div>

Here are siome relatively simple features for 2D drawings that would help greatly: Allowing a drawing to contain multiple sheets, this would save time as currently all sheets need to be exported individually and manua…

---

## [Webviewer](https://discourse.shapr3d.com/t/webviewer/23445)

<div class="topic-metadata">

**Author:** [@Zecnarf](https://discourse.shapr3d.com/u/Zecnarf)\
**Replies:** 3\
**Last updated:** [January 9, 2023, 3:45pm UTC](https://discourse.shapr3d.com/t/webviewer/23445 "2023-01-09T15:45:03Z")

</div>

Please provide a detailed description of the issue. Provide as much information as possible, including screenshots and/or screen recordings. For screen recording, we recommend using Loom (loom.com), an easy-to-use scr…

---

## [Haven‘t used‘t sharpr3d for some time](https://discourse.shapr3d.com/t/haven-t-used-t-sharpr3d-for-some-time/23476)

<div class="topic-metadata">

**Author:** [@Cyberjoa](https://discourse.shapr3d.com/u/Cyberjoa)\
**Replies:** 1\
**Last updated:** [January 8, 2023, 3:25pm UTC](https://discourse.shapr3d.com/t/haven-t-used-t-sharpr3d-for-some-time/23476 "2023-01-08T15:25:48Z")

</div>

Haven‘t used‘t sharpr3d for some time. Seems there have been some substantial changes since then. Where are all my designs gone… cannot find any of them in sharpr3d…

---

## [Crashing on numerical dimension entry](https://discourse.shapr3d.com/t/crashing-on-numerical-dimension-entry/23463)

<div class="topic-metadata">

**Author:** [@Lmfg](https://discourse.shapr3d.com/u/Lmfg)\
**Replies:** 2\
**Last updated:** [January 8, 2023, 9:26am UTC](https://discourse.shapr3d.com/t/crashing-on-numerical-dimension-entry/23463 "2023-01-08T09:26:28Z")

</div>

6th gen ipad pro, Version 5.283.0.4606 crashes consistently when entering a dimension numerically in 3D, sketch dims ok. Does not crash when adjusting dimension via dragging.

---

## [Continue to challenge difficult modeling with shapr3D: mold](https://discourse.shapr3d.com/t/continue-to-challenge-difficult-modeling-with-shapr3d-mold/23459)

<div class="topic-metadata">

**Author:** [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Replies:** 1\
**Last updated:** [January 7, 2023, 5:36pm UTC](https://discourse.shapr3d.com/t/continue-to-challenge-difficult-modeling-with-shapr3d-mold/23459 "2023-01-07T17:36:18Z")

</div>

---

## [5.280 - Show more model details with Webviewer and Visualization](https://discourse.shapr3d.com/t/5-280-show-more-model-details-with-webviewer-and-visualization/22768)

<div class="topic-metadata">

**Author:** [@Jeriz](https://discourse.shapr3d.com/u/Jeriz)\
**Replies:** 14\
**Last updated:** [January 7, 2023, 5:27pm UTC](https://discourse.shapr3d.com/t/5-280-show-more-model-details-with-webviewer-and-visualization/22768 "2023-01-07T17:27:36Z")

</div>

New: Embed your Webviewer models on your website with the new HTML code snippet under Share. Improved: Get a more realistic textile finish to your models when you export your design to Webviewer. Fixed: A sporadic is…

---

## [Shave It](https://discourse.shapr3d.com/t/shave-it/23454)

<div class="topic-metadata">

**Author:** [@DaddyUchi](https://discourse.shapr3d.com/u/DaddyUchi)\
**Replies:** 2\
**Last updated:** [January 7, 2023, 5:21pm UTC](https://discourse.shapr3d.com/t/shave-it/23454 "2023-01-07T17:21:59Z")

</div>

Hello Everyone, I am new to CAD all together. I have trying to research on how to shave this part of the project I am doing. Please help. Hopefully, the image uploaded correctly. There is a little nipple inside of t…

---

## [Mitered Cock Beading on Drawer Front](https://discourse.shapr3d.com/t/mitered-cock-beading-on-drawer-front/23457)

<div class="topic-metadata">

**Author:** [@AlabamaWoodworker](https://discourse.shapr3d.com/u/AlabamaWoodworker)\
**Replies:** 2\
**Last updated:** [January 7, 2023, 5:09pm UTC](https://discourse.shapr3d.com/t/mitered-cock-beading-on-drawer-front/23457 "2023-01-07T17:09:11Z")

</div>

I am designing a media console on a SurfacePro 8. I am trying to model mitered cock beading around the drawer fronts. However, I can not seem to create a miter using the intersect or subtract tool. How would I go about c…

---

## [Is it possible to consider the form obtained by using a single line as the model direction guided by the model?](https://discourse.shapr3d.com/t/is-it-possible-to-consider-the-form-obtained-by-using-a-single-line-as-the-model-direction-guided-by-the-model/23451)

<div class="topic-metadata">

**Author:** [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Replies:** 2\
**Last updated:** [January 7, 2023, 5:09pm UTC](https://discourse.shapr3d.com/t/is-it-possible-to-consider-the-form-obtained-by-using-a-single-line-as-the-model-direction-guided-by-the-model/23451 "2023-01-07T17:09:04Z")

</div>

For example, this picture structure

---

## [AutoCAD Input Selection ](https://discourse.shapr3d.com/t/autocad-input-selection/23452)

<div class="topic-metadata">

**Author:** [@Joohernadez](https://discourse.shapr3d.com/u/Joohernadez)\
**Replies:** 1\
**Last updated:** [January 7, 2023, 4:39pm UTC](https://discourse.shapr3d.com/t/autocad-input-selection/23452 "2023-01-07T16:39:59Z")

</div>

I learned modeling on AutoCAD and would like to use that type of input on my iPad. I can select from Apple Pencil vs mouse and keyboard but I am not able to select this type of input on my iPad. I can only make this sele…

---

## [Basic question on midpoint](https://discourse.shapr3d.com/t/basic-question-on-midpoint/23385)

<div class="topic-metadata">

**Author:** [@mailseckelman](https://discourse.shapr3d.com/u/mailseckelman)\
**Replies:** 1\
**Last updated:** [January 6, 2023, 10:35am UTC](https://discourse.shapr3d.com/t/basic-question-on-midpoint/23385 "2023-01-06T10:35:43Z")

</div>

I’ve looked through the existing midpoint based questions on this forum however still could not find the answer: It’s very simple, I drew an arc and connected two lines to the ends of the arc and am trying to find the mi…

---

## [Is there a function to combine two designs made of SHAPR3D into one design?](https://discourse.shapr3d.com/t/is-there-a-function-to-combine-two-designs-made-of-shapr3d-into-one-design/23432)

<div class="topic-metadata">

**Author:** [@MKPark](https://discourse.shapr3d.com/u/MKPark)\
**Replies:** 2\
**Last updated:** [January 7, 2023, 3:35pm UTC](https://discourse.shapr3d.com/t/is-there-a-function-to-combine-two-designs-made-of-shapr3d-into-one-design/23432 "2023-01-07T15:35:06Z")

</div>

Is there a function to combine two designs made of SHAPR3D into one design?

---

## [How do add a flat siral/thread ](https://discourse.shapr3d.com/t/how-do-add-a-flat-siral-thread/23453)

<div class="topic-metadata">

**Author:** [@Elias1337](https://discourse.shapr3d.com/u/Elias1337)\
**Replies:** 0\
**Last updated:** [January 7, 2023, 3:34pm UTC](https://discourse.shapr3d.com/t/how-do-add-a-flat-siral-thread/23453 "2023-01-07T15:34:19Z")

</div>

Please provide a detailed description of the issue. Provide as much information as possible, including screenshots and/or screen recordings. For screen recording, we recommend using Loom (loom.com), an easy-to-use screen…

---

## [Can't log in via browser, and support won't help](https://discourse.shapr3d.com/t/cant-log-in-via-browser-and-support-wont-help/21125)

<div class="topic-metadata">

**Author:** [@texasjakit](https://discourse.shapr3d.com/u/texasjakit)\
**Replies:** 8\
**Last updated:** [January 7, 2023, 3:33pm UTC](https://discourse.shapr3d.com/t/cant-log-in-via-browser-and-support-wont-help/21125 "2023-01-07T15:33:56Z")

</div>

I can log in fine on the browser, but every time I push continue, shapr3D just spins, refreshes, shows “log in via browser again”. I’ve used every kind of browser. My main Browser is Brave Browser.

---

## [Project Step not happening](https://discourse.shapr3d.com/t/project-step-not-happening/22853)

<div class="topic-metadata">

**Author:** [@Peter\_b](https://discourse.shapr3d.com/u/Peter_b)\
**Replies:** 3\
**Last updated:** [January 6, 2023, 7:24pm UTC](https://discourse.shapr3d.com/t/project-step-not-happening/22853 "2023-01-06T19:24:00Z")

</div>

Yeah I know, not much love for imported Stuff, I get it, but this should work in my opinion. Its also a bridge to rebuild an object in Shapr so would be nice to work. And the result after clicking DONE No project…

---

## [What is it](https://discourse.shapr3d.com/t/what-is-it/23421)

<div class="topic-metadata">

**Author:** [@Anna](https://discourse.shapr3d.com/u/Anna)\
**Replies:** 1\
**Last updated:** [January 5, 2023, 9:58am UTC](https://discourse.shapr3d.com/t/what-is-it/23421 "2023-01-05T09:58:17Z")

</div>

What does Operation failed because the resulting body wouldn’t be vaild.

[Previous page](https://discourse.shapr3d.com/latest.md?page=186)

[Next page](https://discourse.shapr3d.com/latest.md?page=188)