# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=191

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 192

---

## [Robo remake](https://discourse.shapr3d.com/t/robo-remake/20616)

<div class="topic-metadata">

**Author:** [@peteCdesign](https://discourse.shapr3d.com/u/peteCdesign)\
**Replies:** 16\
**Last updated:** [December 19, 2022, 6:32pm UTC](https://discourse.shapr3d.com/t/robo-remake/20616 "2022-12-19T18:32:26Z")

</div>

remaking an old model on shapr

---

## [River property studio / short term rental](https://discourse.shapr3d.com/t/river-property-studio-short-term-rental/23085)

<div class="topic-metadata">

**Author:** [@FWP](https://discourse.shapr3d.com/u/FWP)\
**Replies:** 0\
**Last updated:** [December 19, 2022, 6:12pm UTC](https://discourse.shapr3d.com/t/river-property-studio-short-term-rental/23085 "2022-12-19T18:12:11Z")

</div>

A quick doodle for a family friend, tearing down an old “boat house” and replacing with a minimalist structure to last generations.

---

## [Spacecraft for my sci-fi film](https://discourse.shapr3d.com/t/spacecraft-for-my-sci-fi-film/22675)

<div class="topic-metadata">

**Author:** [@NovumInitium](https://discourse.shapr3d.com/u/NovumInitium)\
**Replies:** 11\
**Last updated:** [December 19, 2022, 5:59pm UTC](https://discourse.shapr3d.com/t/spacecraft-for-my-sci-fi-film/22675 "2022-12-19T17:59:23Z")

</div>

Almost finished but not quite.

---

## [Racing Car Shapr3D model render](https://discourse.shapr3d.com/t/racing-car-shapr3d-model-render/23023)

<div class="topic-metadata">

**Author:** [@JonCrooke](https://discourse.shapr3d.com/u/JonCrooke)\
**Replies:** 7\
**Last updated:** [December 19, 2022, 5:55pm UTC](https://discourse.shapr3d.com/t/racing-car-shapr3d-model-render/23023 "2022-12-19T17:55:47Z")

</div>

---

## [Traced an image, trying to unite and extrude. Stumped!](https://discourse.shapr3d.com/t/traced-an-image-trying-to-unite-and-extrude-stumped/23042)

<div class="topic-metadata">

**Author:** [@tacorachel](https://discourse.shapr3d.com/u/tacorachel)\
**Replies:** 5\
**Last updated:** [December 19, 2022, 5:51pm UTC](https://discourse.shapr3d.com/t/traced-an-image-trying-to-unite-and-extrude-stumped/23042 "2022-12-19T17:51:24Z")

</div>

Hi everybody, first time poster and newbie to Shapr3D. I traced an image of this dog and cannot figure out why I can’t unite everything then extrude. I’m making it into a plant stake as a Christmas present. Thanks in adv…

---

## [Unable to close sketch](https://discourse.shapr3d.com/t/unable-to-close-sketch/22645)

<div class="topic-metadata">

**Author:** [@Ubbe](https://discourse.shapr3d.com/u/Ubbe)\
**Replies:** 4\
**Last updated:** [December 19, 2022, 4:33pm UTC](https://discourse.shapr3d.com/t/unable-to-close-sketch/22645 "2022-12-19T16:33:16Z")

</div>

I have created a sketch with two fit type splines, sort of offset from each other with a line to close up the gap between them. When i leave the sketch mode and try to select the enclosed area the inner spline does not …

---

## [Invalid body when using "offset face" on a dome](https://discourse.shapr3d.com/t/invalid-body-when-using-offset-face-on-a-dome/22926)

<div class="topic-metadata">

**Author:** [@dyelax](https://discourse.shapr3d.com/u/dyelax)\
**Replies:** 5\
**Last updated:** [December 19, 2022, 3:11pm UTC](https://discourse.shapr3d.com/t/invalid-body-when-using-offset-face-on-a-dome/22926 "2022-12-19T15:11:51Z")

</div>

Hi all, I’m new to Shapr3D (and 3D modeling in general). I’m trying to extrude a moderately complex shape on top of a domed surface, but I keep getting the error “Operation failed because the resulting body wouldn’t be v…

---

## [Test AR échelle 1/1](https://discourse.shapr3d.com/t/test-ar-echelle-1-1/23075)

<div class="topic-metadata">

**Author:** [@Paparau](https://discourse.shapr3d.com/u/Paparau)\
**Replies:** 6\
**Last updated:** [December 19, 2022, 9:22am UTC](https://discourse.shapr3d.com/t/test-ar-echelle-1-1/23075 "2022-12-19T09:22:11Z")

</div>

test AR in Polynesia French

---

## [Options for OBJ export](https://discourse.shapr3d.com/t/options-for-obj-export/23031)

<div class="topic-metadata">

**Author:** [@CannaSoftware](https://discourse.shapr3d.com/u/CannaSoftware)\
**Replies:** 11\
**Last updated:** [December 18, 2022, 7:51am UTC](https://discourse.shapr3d.com/t/options-for-obj-export/23031 "2022-12-18T07:51:06Z")

</div>

The problem that this feature will solve: Currently any object exported in OBJ format that is inputted into Epic’s Unreal will be turned +90 degrees. So a house will have the front door sticking up in the air (hard to g…

---

## [Nested drawers](https://discourse.shapr3d.com/t/nested-drawers/23059)

<div class="topic-metadata">

**Author:** [@ctbritt](https://discourse.shapr3d.com/u/ctbritt)\
**Replies:** 1\
**Last updated:** [December 16, 2022, 8:17pm UTC](https://discourse.shapr3d.com/t/nested-drawers/23059 "2022-12-16T20:17:55Z")

</div>

Does one know of a good tutorial for beginners on how to make nested drawers? Stacking, I mean. Like a bento box? Thanks Chris

---

## [Graphics on parts](https://discourse.shapr3d.com/t/graphics-on-parts/23055)

<div class="topic-metadata">

**Author:** [@rjhill](https://discourse.shapr3d.com/u/rjhill)\
**Replies:** 2\
**Last updated:** [December 16, 2022, 6:49pm UTC](https://discourse.shapr3d.com/t/graphics-on-parts/23055 "2022-12-16T18:49:41Z")

</div>

When I lay a label graphic (png) on my part, it looks fine in the design view but disappears when I use visualization. Do I have re-create each feature on to my part to make it show up in the visualizer? I’ve seen othe…

---

## [Adding templates on 2D drawings for logos and company information](https://discourse.shapr3d.com/t/adding-templates-on-2d-drawings-for-logos-and-company-information/23054)

<div class="topic-metadata">

**Author:** [@Chris\_S](https://discourse.shapr3d.com/u/Chris_S)\
**Replies:** 0\
**Last updated:** [December 16, 2022, 3:14pm UTC](https://discourse.shapr3d.com/t/adding-templates-on-2d-drawings-for-logos-and-company-information/23054 "2022-12-16T15:14:28Z")

</div>

Please follow the format below for requesting a feature. The problem that this feature will solve: Consider adding customisable templates for 2D drawings. Brief description of the outcomes that you expect from this fe…

---

## [Every day is mechanical and industrial modeling without fun. Let's have some childlike fun](https://discourse.shapr3d.com/t/every-day-is-mechanical-and-industrial-modeling-without-fun-lets-have-some-childlike-fun/23053)

<div class="topic-metadata">

**Author:** [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Replies:** 0\
**Last updated:** [December 16, 2022, 3:13pm UTC](https://discourse.shapr3d.com/t/every-day-is-mechanical-and-industrial-modeling-without-fun-lets-have-some-childlike-fun/23053 "2022-12-16T15:13:39Z")

</div>

---

## [How can I download just a sigle part from a design?](https://discourse.shapr3d.com/t/how-can-i-download-just-a-sigle-part-from-a-design/22980)

<div class="topic-metadata">

**Author:** [@Bogdan](https://discourse.shapr3d.com/u/Bogdan)\
**Replies:** 6\
**Last updated:** [December 16, 2022, 7:12am UTC](https://discourse.shapr3d.com/t/how-can-i-download-just-a-sigle-part-from-a-design/22980 "2022-12-16T07:12:48Z")

</div>

I am working on Ipad and i don’t know how to download just a single .stl part from a design. Please let me please if it is possible!

---

## [Drawing on a curve](https://discourse.shapr3d.com/t/drawing-on-a-curve/22979)

<div class="topic-metadata">

**Author:** [@Dragoon6](https://discourse.shapr3d.com/u/Dragoon6)\
**Replies:** 6\
**Last updated:** [December 15, 2022, 8:31pm UTC](https://discourse.shapr3d.com/t/drawing-on-a-curve/22979 "2022-12-15T20:31:46Z")

</div>

Hello I’m having an issue getting accurate measurement when projecting an image. I have a specific shape and a specific curve to accomplish. I believe that if there could be a function that you could draw on a curve or …

---

## [Can Shapr make a Gyroid?](https://discourse.shapr3d.com/t/can-shapr-make-a-gyroid/9541)

<div class="topic-metadata">

**Author:** [@Wdmccurdy](https://discourse.shapr3d.com/u/Wdmccurdy)\
**Replies:** 7\
**Last updated:** [December 15, 2022, 1:25pm UTC](https://discourse.shapr3d.com/t/can-shapr-make-a-gyroid/9541 "2022-12-15T13:25:26Z")

</div>

I’ve been at this for a few days trying to recreate this mesh gyroid or a similar gyroid as a solid body. I’d like to see if anybody else is up to the challenge and I would love to know how to do it if someone figures it…

---

## [All my files have been deleted](https://discourse.shapr3d.com/t/all-my-files-have-been-deleted/23037)

<div class="topic-metadata">

**Author:** [@Sexmachine](https://discourse.shapr3d.com/u/Sexmachine)\
**Replies:** 1\
**Last updated:** [December 15, 2022, 7:00am UTC](https://discourse.shapr3d.com/t/all-my-files-have-been-deleted/23037 "2022-12-15T07:00:24Z")

</div>

First time that I’ve opened the app after the last update and all of my files have been deleted. Should I reset my iPad to the last time I backed it up on iCloud to restore? What’s the easiest way to get the designs back…

---

## [Versioning](https://discourse.shapr3d.com/t/versioning/22731)

<div class="topic-metadata">

**Author:** [@Side00](https://discourse.shapr3d.com/u/Side00)\
**Replies:** 3\
**Last updated:** [December 13, 2022, 7:38pm UTC](https://discourse.shapr3d.com/t/versioning/22731 "2022-12-13T19:38:17Z")

</div>

Not sure if anyone has requested versioning before, but it’s a must-have feature in the programming industry, and I probably don’t have to explain how it works. In general, it would be nice to be able to keep track of d…

---

## [Processing but does nothing](https://discourse.shapr3d.com/t/processing-but-does-nothing/23032)

<div class="topic-metadata">

**Author:** [@Duder](https://discourse.shapr3d.com/u/Duder)\
**Replies:** 3\
**Last updated:** [December 14, 2022, 10:04pm UTC](https://discourse.shapr3d.com/t/processing-but-does-nothing/23032 "2022-12-14T22:04:58Z")

</div>

Using on MacOS, MacBook Air M1. Often the app will hang processing, the little spinner at the top going. Sometimes for super simple things like an extrude. In this instance, it does that for a while then totally ignores …

---

## [Unknown items](https://discourse.shapr3d.com/t/unknown-items/23029)

<div class="topic-metadata">

**Author:** [@Nick1](https://discourse.shapr3d.com/u/Nick1)\
**Replies:** 1\
**Last updated:** [December 14, 2022, 8:25pm UTC](https://discourse.shapr3d.com/t/unknown-items/23029 "2022-12-14T20:25:05Z")

</div>

Anyone tell me what’s here?. Why are there light blue faces on my model? Nick1

---

## [New version horked!](https://discourse.shapr3d.com/t/new-version-horked/23024)

<div class="topic-metadata">

**Author:** [@VAXman](https://discourse.shapr3d.com/u/VAXman)\
**Replies:** 3\
**Last updated:** [December 14, 2022, 3:34pm UTC](https://discourse.shapr3d.com/t/new-version-horked/23024 "2022-12-14T15:34:36Z")

</div>

Installed latest version when I fired up Shapr3D today. Now, if I go to sketch and select a sketch option (eg. circle), the sketch menu disappears and goes back to the Sketch|Add|Transform|Tool menu but the sketch item …

---

## [Why I quit](https://discourse.shapr3d.com/t/why-i-quit/22930)

<div class="topic-metadata">

**Author:** [@AikevanderHoeff](https://discourse.shapr3d.com/u/AikevanderHoeff)\
**Replies:** 5\
**Last updated:** [December 14, 2022, 3:24pm UTC](https://discourse.shapr3d.com/t/why-i-quit/22930 "2022-12-14T15:24:49Z")

</div>

Shapr3D is great. An active community and an active Shapr3D team, for help and assistance. It feels ok. Also because of the user-friendly operation, and the effective tutorials. Still I decided not to renew my subscript…

---

## [Create a text in Shapr3D](https://discourse.shapr3d.com/t/create-a-text-in-shapr3d/23018)

<div class="topic-metadata">

**Author:** [@RobinBouten](https://discourse.shapr3d.com/u/RobinBouten)\
**Replies:** 2\
**Last updated:** [December 14, 2022, 11:51am UTC](https://discourse.shapr3d.com/t/create-a-text-in-shapr3d/23018 "2022-12-14T11:51:14Z")

</div>

Hello I would like to add a text to a design. I want to make this in Shapr3D just not straight but in a circle. Is this possible?

---

## [DXF files to SendCutSend](https://discourse.shapr3d.com/t/dxf-files-to-sendcutsend/20057)

<div class="topic-metadata">

**Author:** [@Adv4x4](https://discourse.shapr3d.com/u/Adv4x4)\
**Replies:** 19\
**Last updated:** [December 14, 2022, 1:28am UTC](https://discourse.shapr3d.com/t/dxf-files-to-sendcutsend/20057 "2022-12-14T01:28:15Z")

</div>

I’m trying to export a 2D drawing as a DXF so I can upload it to SendCutSend.com With the drawing created I go to export it as a DXF to my Files app on my IPad. It shows up there and I’m able to import that same file t…

---

## [Filming in AR](https://discourse.shapr3d.com/t/filming-in-ar/23014)

<div class="topic-metadata">

**Author:** [@mangolego](https://discourse.shapr3d.com/u/mangolego)\
**Replies:** 7\
**Last updated:** [December 13, 2022, 6:12pm UTC](https://discourse.shapr3d.com/t/filming-in-ar/23014 "2022-12-13T18:12:57Z")

</div>

Is there an app or would Shapr3D would consider a way to be able to film my models in AR with my iPad Pro. I really like to take pictures of them but being able to make movie out of them would increase my creativity. I …

---

## [Volume information](https://discourse.shapr3d.com/t/volume-information/23004)

<div class="topic-metadata">

**Author:** [@World\_citizen](https://discourse.shapr3d.com/u/World_citizen)\
**Replies:** 3\
**Last updated:** [December 13, 2022, 6:00pm UTC](https://discourse.shapr3d.com/t/volume-information/23004 "2022-12-13T18:00:17Z")

</div>

Is there a way to check the volume of a geometry? I work in packaging and when modelling a bottle shape, I need to check if it has the required volume capacity. Thank you in advance for your help.

---

## [Angular dimensions/references when drawing lines](https://discourse.shapr3d.com/t/angular-dimensions-references-when-drawing-lines/23011)

<div class="topic-metadata">

**Author:** [@JB69](https://discourse.shapr3d.com/u/JB69)\
**Replies:** 1\
**Last updated:** [December 13, 2022, 4:37pm UTC](https://discourse.shapr3d.com/t/angular-dimensions-references-when-drawing-lines/23011 "2022-12-13T16:37:12Z")

</div>

I am trying to determine how to draw lines in Sketch from the center of a circle a specific angle apart repeatedly.

---

## [Circles switching from diameter to radius](https://discourse.shapr3d.com/t/circles-switching-from-diameter-to-radius/22709)

<div class="topic-metadata">

**Author:** [@mkelleyp](https://discourse.shapr3d.com/u/mkelleyp)\
**Replies:** 6\
**Last updated:** [December 13, 2022, 12:17pm UTC](https://discourse.shapr3d.com/t/circles-switching-from-diameter-to-radius/22709 "2022-12-13T12:17:53Z")

</div>

I have Circles set to diameter and radius in settings but I am only able to draw a circle using the diameter. Is there a way to switch between diameter and radius in the drawing space? Thanks, Mike

---

## [Move alongside a single axis : hover end point to exactly align](https://discourse.shapr3d.com/t/move-alongside-a-single-axis-hover-end-point-to-exactly-align/23002)

<div class="topic-metadata">

**Author:** [@Arnopello](https://discourse.shapr3d.com/u/Arnopello)\
**Replies:** 4\
**Last updated:** [December 13, 2022, 11:17am UTC](https://discourse.shapr3d.com/t/move-alongside-a-single-axis-hover-end-point-to-exactly-align/23002 "2022-12-13T11:17:57Z")

</div>

Hi The problem that this feature will solve: When we move a body alongside an axis through the screen arrows, we can only move if we know by how much distance we want it, or by snapping it to the grid if, by chance, ou…

---

## [2D .AI file onto curved 3D model](https://discourse.shapr3d.com/t/2d-ai-file-onto-curved-3d-model/22740)

<div class="topic-metadata">

**Author:** [@dotgained](https://discourse.shapr3d.com/u/dotgained)\
**Replies:** 1\
**Last updated:** [December 13, 2022, 9:15am UTC](https://discourse.shapr3d.com/t/2d-ai-file-onto-curved-3d-model/22740 "2022-12-13T09:15:52Z")

</div>

Hi All, Could anyone help direct me to perhaps the solution for this? I have a 2D .AI vector graphic that I’d like to put into a curved edge of a 3D model. When I attempt to put this AI graphic on, it won’t take the des…

[Previous page](https://discourse.shapr3d.com/latest.md?page=190)

[Next page](https://discourse.shapr3d.com/latest.md?page=192)