# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=197

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 198

---

## [Center aligning objects](https://discourse.shapr3d.com/t/center-aligning-objects/22432)

<div class="topic-metadata">

**Author:** [@lenart](https://discourse.shapr3d.com/u/lenart)\
**Replies:** 1\
**Last updated:** [November 11, 2022, 4:41pm UTC](https://discourse.shapr3d.com/t/center-aligning-objects/22432 "2022-11-11T16:41:56Z")

</div>

How do you center align object (simple rectangle) with a group(3D logo)

---

## [Constraints on 3D Objects](https://discourse.shapr3d.com/t/constraints-on-3d-objects/22374)

<div class="topic-metadata">

**Author:** [@OliN](https://discourse.shapr3d.com/u/OliN)\
**Replies:** 8\
**Last updated:** [November 11, 2022, 2:48pm UTC](https://discourse.shapr3d.com/t/constraints-on-3d-objects/22374 "2022-11-11T14:48:03Z")

</div>

Hi, I create custom kitchen units and have recently started using Shapr3D to model the room designs. There are quite a lot of non-standard door sizes in my designs so I’m wanting to build a base door model that I can imp…

---

## [Creating loft problem](https://discourse.shapr3d.com/t/creating-loft-problem/22424)

<div class="topic-metadata">

**Author:** [@KRS](https://discourse.shapr3d.com/u/KRS)\
**Replies:** 1\
**Last updated:** [November 10, 2022, 2:53pm UTC](https://discourse.shapr3d.com/t/creating-loft-problem/22424 "2022-11-10T14:53:30Z")

</div>

Hello, I’m quite new to Shapr and i’m still learning a lot, but I stared creating more complex shapes and using LOFT function. I acountered a problem that I’m fighting with for some time and I can’t see the problem. The…

---

## [Attempting to model a house (eventually!)](https://discourse.shapr3d.com/t/attempting-to-model-a-house-eventually/22417)

<div class="topic-metadata">

**Author:** [@SkillipEvolver](https://discourse.shapr3d.com/u/SkillipEvolver)\
**Replies:** 1\
**Last updated:** [November 9, 2022, 11:29pm UTC](https://discourse.shapr3d.com/t/attempting-to-model-a-house-eventually/22417 "2022-11-09T23:29:43Z")

</div>

Hey guys. Wondering wondering if anybody can help? I’ve been a sketch up user for a long time, and I’m currently trying to expand my portfolio by building another house in 3-D. This time I want to do it on Shapr3D bec…

---

## [How can i draw?](https://discourse.shapr3d.com/t/how-can-i-draw/22385)

<div class="topic-metadata">

**Author:** [@poohbbang](https://discourse.shapr3d.com/u/poohbbang)\
**Replies:** 6\
**Last updated:** [November 9, 2022, 9:50pm UTC](https://discourse.shapr3d.com/t/how-can-i-draw/22385 "2022-11-09T21:50:19Z")

</div>

How can i draw the front shape in a circle like the product?

---

## [First work on shapr 3d hospital design](https://discourse.shapr3d.com/t/first-work-on-shapr-3d-hospital-design/22194)

<div class="topic-metadata">

**Author:** [@Arch](https://discourse.shapr3d.com/u/Arch)\
**Replies:** 4\
**Last updated:** [November 9, 2022, 9:07pm UTC](https://discourse.shapr3d.com/t/first-work-on-shapr-3d-hospital-design/22194 "2022-11-09T21:07:47Z")

</div>

(https://h.top4top.io/p\_2493jblq10.jpg)

---

## [Minor tweaks to the user experience](https://discourse.shapr3d.com/t/minor-tweaks-to-the-user-experience/22402)

<div class="topic-metadata">

**Author:** [@jcclow](https://discourse.shapr3d.com/u/jcclow)\
**Replies:** 16\
**Last updated:** [November 9, 2022, 7:51pm UTC](https://discourse.shapr3d.com/t/minor-tweaks-to-the-user-experience/22402 "2022-11-09T19:51:31Z")

</div>

I hate to make suggestions because the software is pretty great as is, but these are small tweaks that I think would streamline creation. When turning off “Line/Arc (Automatic)” the one button could be replaced by a “L…

---

## [View to sheet scale](https://discourse.shapr3d.com/t/view-to-sheet-scale/22411)

<div class="topic-metadata">

**Author:** [@Jonathan](https://discourse.shapr3d.com/u/Jonathan)\
**Replies:** 1\
**Last updated:** [November 9, 2022, 5:07pm UTC](https://discourse.shapr3d.com/t/view-to-sheet-scale/22411 "2022-11-09T17:07:09Z")

</div>

Hi @sharpr team, I’ve a suggestion, for 2d drawing, in the “view to sheet scale”, I miss the scale between 1:20 and 1:50. With 1:20 my designs are too big and outside the A4 sheet, with 1:50 it’s too small. Would be gr…

---

## [Spring frustration](https://discourse.shapr3d.com/t/spring-frustration/22400)

<div class="topic-metadata">

**Author:** [@Thehifimechanik](https://discourse.shapr3d.com/u/Thehifimechanik)\
**Replies:** 4\
**Last updated:** [November 9, 2022, 1:39pm UTC](https://discourse.shapr3d.com/t/spring-frustration/22400 "2022-11-09T13:39:22Z")

</div>

Hi, I’m very new to Shapr3D but loving its potential for a project, I’m stuck on a frustrating part of making a spring. I just need the spring to be flat at both ends (so it would stand vertical). I’m looking to flatten…

---

## [Conical Table Base - Measurements & Angles?](https://discourse.shapr3d.com/t/conical-table-base-measurements-angles/22393)

<div class="topic-metadata">

**Author:** [@StuffSethMakes](https://discourse.shapr3d.com/u/StuffSethMakes)\
**Replies:** 7\
**Last updated:** [November 9, 2022, 1:23pm UTC](https://discourse.shapr3d.com/t/conical-table-base-measurements-angles/22393 "2022-11-09T13:23:26Z")

</div>

Hi all, first post here, just getting started with Shapr3D after using Sketchup for a few years. I’ve done several of the tutorials on the Shapr3D website (which are great by the way), but admittedly I haven’t had a cha…

---

## [Change the angle of een extruded body](https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409)

<div class="topic-metadata">

**Author:** [@RobinBouten](https://discourse.shapr3d.com/u/RobinBouten)\
**Replies:** 1\
**Last updated:** [November 9, 2022, 11:39am UTC](https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409 "2022-11-09T11:39:26Z")

</div>

Hi, I have created a body with an angle during extruding de body. Is there a way to change the angle after extruding the body? Thanks!!

---

## [Shapr3d on Arm after updated](https://discourse.shapr3d.com/t/shapr3d-on-arm-after-updated/22320)

<div class="topic-metadata">

**Author:** [@Jasonchoi8](https://discourse.shapr3d.com/u/Jasonchoi8)\
**Replies:** 7\
**Last updated:** [November 9, 2022, 9:20am UTC](https://discourse.shapr3d.com/t/shapr3d-on-arm-after-updated/22320 "2022-11-09T09:20:11Z")

</div>

After my arm windows 11 updated the shapr3d to lastest version its can not execute, the starting UI show few second and dismiss, i have no this issue on my previous version, what should i do？

---

## [Suggestion: The display position of iPad sketch line value should be placed above the pen](https://discourse.shapr3d.com/t/suggestion-the-display-position-of-ipad-sketch-line-value-should-be-placed-above-the-pen/22405)

<div class="topic-metadata">

**Author:** [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Replies:** 0\
**Last updated:** [November 9, 2022, 5:17am UTC](https://discourse.shapr3d.com/t/suggestion-the-display-position-of-ipad-sketch-line-value-should-be-placed-above-the-pen/22405 "2022-11-09T05:17:19Z")

</div>

When sketching, it is suggested that the numbers should be displayed at the top, so that we can control the length of the line drawing at the first time.

---

## [公园多拱形造型（Park modeling facilities）](https://discourse.shapr3d.com/t/park-modeling-facilities/22389)

<div class="topic-metadata">

**Author:** [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Replies:** 0\
**Last updated:** [November 8, 2022, 11:44am UTC](https://discourse.shapr3d.com/t/park-modeling-facilities/22389 "2022-11-08T11:44:26Z")

</div>

---

## [Delete lines between multiple faces within same body?](https://discourse.shapr3d.com/t/delete-lines-between-multiple-faces-within-same-body/22352)

<div class="topic-metadata">

**Author:** [@gdfyff](https://discourse.shapr3d.com/u/gdfyff)\
**Replies:** 3\
**Last updated:** [November 8, 2022, 9:13am UTC](https://discourse.shapr3d.com/t/delete-lines-between-multiple-faces-within-same-body/22352 "2022-11-08T09:13:17Z")

</div>

How can I delete those unintended lines ? After I select them, I find no operation or tool to get rid of time. Most importantly, I want its side to look smooth and seamless as I would use it in a patent drawing.

---

## [Shadow Quality pixelated](https://discourse.shapr3d.com/t/shadow-quality-pixelated/22371)

<div class="topic-metadata">

**Author:** [@Pablo](https://discourse.shapr3d.com/u/Pablo)\
**Replies:** 2\
**Last updated:** [November 8, 2022, 8:06am UTC](https://discourse.shapr3d.com/t/shadow-quality-pixelated/22371 "2022-11-08T08:06:11Z")

</div>

On small models around 200mmx95mm the shadows are very pixelated. Do I need to change a setting? Thanks for suggestions.

---

## [Extreme Lag on complex sketch with no bodies](https://discourse.shapr3d.com/t/extreme-lag-on-complex-sketch-with-no-bodies/22362)

<div class="topic-metadata">

**Author:** [@1oakdesign](https://discourse.shapr3d.com/u/1oakdesign)\
**Replies:** 3\
**Last updated:** [November 7, 2022, 7:08pm UTC](https://discourse.shapr3d.com/t/extreme-lag-on-complex-sketch-with-no-bodies/22362 "2022-11-07T19:08:57Z")

</div>

Hello, I’m fairly new to Shapr3d. The learning curve from SketchUp was a bit, but now I’m loving it. Only issue I’m currently having is extreme lag on complex sketch with no bodies. Each operation, even the undo operat…

---

## [Need help on setting up an edu license? We are here!](https://discourse.shapr3d.com/t/need-help-on-setting-up-an-edu-license-we-are-here/22376)

<div class="topic-metadata">

**Author:** [@Wesley](https://discourse.shapr3d.com/u/Wesley)\
**Replies:** 0\
**Last updated:** [November 7, 2022, 6:13pm UTC](https://discourse.shapr3d.com/t/need-help-on-setting-up-an-edu-license-we-are-here/22376 "2022-11-07T18:13:56Z")

</div>

How to set up you edu license Open Shapr3D and go to the payment options. At the bottom of that page, it will have a blue link that reads “request an edu license”. Fill out the prompted info. It may ask for a picture o…

---

## [Making a brick wall texture for 3d printing](https://discourse.shapr3d.com/t/making-a-brick-wall-texture-for-3d-printing/22347)

<div class="topic-metadata">

**Author:** [@Curiousmissy](https://discourse.shapr3d.com/u/Curiousmissy)\
**Replies:** 4\
**Last updated:** [November 7, 2022, 5:18pm UTC](https://discourse.shapr3d.com/t/making-a-brick-wall-texture-for-3d-printing/22347 "2022-11-07T17:18:50Z")

</div>

Hi Guys! I am trying to make a mini house/shop and 3d print it. Best way to go about it is to sketch it all up on here and then cut it so that I print each wall individually laying down for better quality. Totally fine …

---

## [Need help with mirroring object](https://discourse.shapr3d.com/t/need-help-with-mirroring-object/22356)

<div class="topic-metadata">

**Author:** [@Special\_K](https://discourse.shapr3d.com/u/Special_K)\
**Replies:** 1\
**Last updated:** [November 7, 2022, 4:30pm UTC](https://discourse.shapr3d.com/t/need-help-with-mirroring-object/22356 "2022-11-07T16:30:27Z")

</div>

Hi all, This I’m sure is a common question, I’m currently working on a project and for some reason it won’t allow me to mirror. It did it before I updated the model but for some reason it fails to do it now with the com…

---

## [Newbie Help with Importing a Sketch](https://discourse.shapr3d.com/t/newbie-help-with-importing-a-sketch/22373)

<div class="topic-metadata">

**Author:** [@Doggitz](https://discourse.shapr3d.com/u/Doggitz)\
**Replies:** 0\
**Last updated:** [November 7, 2022, 4:09pm UTC](https://discourse.shapr3d.com/t/newbie-help-with-importing-a-sketch/22373 "2022-11-07T16:09:22Z")

</div>

I am trying to create a box with a dsub connector at one end. The box is 100 mm long by 50 mm wide and 30 mm high. I created a 2d sketch, made the walls of the box 3mm thick and extruded the box. So far, easy. I created …

---

## [Account works on iPad and iMac but not on my windows laptop](https://discourse.shapr3d.com/t/account-works-on-ipad-and-imac-but-not-on-my-windows-laptop/22367)

<div class="topic-metadata">

**Author:** [@Pet](https://discourse.shapr3d.com/u/Pet)\
**Replies:** 1\
**Last updated:** [November 7, 2022, 3:15pm UTC](https://discourse.shapr3d.com/t/account-works-on-ipad-and-imac-but-not-on-my-windows-laptop/22367 "2022-11-07T15:15:46Z")

</div>

Hi there I have bin using Shapr3D for quite a while now and expanded from using it only on my iPad to also using it on my iMac and I have to say it works a treat which is why I wanted to also use it on my windows laptop.…

---

## [Snapping Lines To Splines](https://discourse.shapr3d.com/t/snapping-lines-to-splines/22037)

<div class="topic-metadata">

**Author:** [@Steelboss](https://discourse.shapr3d.com/u/Steelboss)\
**Replies:** 8\
**Last updated:** [November 7, 2022, 1:34pm UTC](https://discourse.shapr3d.com/t/snapping-lines-to-splines/22037 "2022-11-07T13:34:20Z")

</div>

Hello All, I am Shapr3D newbee following a Toaster tutorial: Toaster Tutorial 1 In the video @17:03, the Pro links a horizontal line to a Spline, and calls it “gluing”. From that point, he can make the organic spl…

---

## [Dimension over rotation axis as diameter](https://discourse.shapr3d.com/t/dimension-over-rotation-axis-as-diameter/22344)

<div class="topic-metadata">

**Author:** [@Matt\_the-Rathje](https://discourse.shapr3d.com/u/Matt_the-Rathje)\
**Replies:** 5\
**Last updated:** [November 7, 2022, 12:20pm UTC](https://discourse.shapr3d.com/t/dimension-over-rotation-axis-as-diameter/22344 "2022-11-07T12:20:30Z")

</div>

Hello there, I am new here either in the forum and the software. Due to my personal history (see my profile-description) I tend to have a very gooD feeling, what the requirements of mechanical engineers (who are defina…

---

## [Aligning bodies exactly](https://discourse.shapr3d.com/t/aligning-bodies-exactly/21826)

<div class="topic-metadata">

**Author:** [@rowan.bradley](https://discourse.shapr3d.com/u/rowan.bradley)\
**Replies:** 10\
**Last updated:** [November 7, 2022, 8:46am UTC](https://discourse.shapr3d.com/t/aligning-bodies-exactly/21826 "2022-11-07T08:46:38Z")

</div>

I my model I have a number of bodies. I need to adjust the positions of these so that they are exactly touching each other. When I try to do this using Move and Rotate, the arrows to mode the body are often off the scree…

---

## [Building something for fun](https://discourse.shapr3d.com/t/building-something-for-fun/19176)

<div class="topic-metadata">

**Author:** [@peteCdesign](https://discourse.shapr3d.com/u/peteCdesign)\
**Replies:** 10\
**Last updated:** [November 6, 2022, 10:51pm UTC](https://discourse.shapr3d.com/t/building-something-for-fun/19176 "2022-11-06T22:51:03Z")

</div>

I’m going to build something just for fun and as a technical exercise, and add to it every day when I get a few spare hours. I don’t know what it’s going to turn into, a robot, vehicle etc, that’s why I find shapr rea…

---

## [Signing up to Shapr3D](https://discourse.shapr3d.com/t/signing-up-to-shapr3d/22342)

<div class="topic-metadata">

**Author:** [@sgaull](https://discourse.shapr3d.com/u/sgaull)\
**Replies:** 2\
**Last updated:** [November 6, 2022, 9:16pm UTC](https://discourse.shapr3d.com/t/signing-up-to-shapr3d/22342 "2022-11-06T21:16:59Z")

</div>

Hi, I’d like to begin using Shapr and sign up to the monthly subscription. But I have 1 question: The visualisation section on the website gives me the impression that it’s something separate from the main software? Th…

---

## [Measuring](https://discourse.shapr3d.com/t/measuring/22340)

<div class="topic-metadata">

**Author:** [@Schwempa](https://discourse.shapr3d.com/u/Schwempa)\
**Replies:** 9\
**Last updated:** [November 6, 2022, 9:12pm UTC](https://discourse.shapr3d.com/t/measuring/22340 "2022-11-06T21:12:18Z")

</div>

I´m new to Shapr3D on a Mac Powerbook, Converting from SketchUp, which has been a great help in many ways. I believe Shapr3D is a. better tool for modeling. But a tool I really miss, is the “ruler tool” which enables me…

---

## [Feature request: iPhone app for AR Visualisation](https://discourse.shapr3d.com/t/feature-request-iphone-app-for-ar-visualisation/22338)

<div class="topic-metadata">

**Author:** [@Babyyoda777](https://discourse.shapr3d.com/u/Babyyoda777)\
**Replies:** 5\
**Last updated:** [November 6, 2022, 5:05pm UTC](https://discourse.shapr3d.com/t/feature-request-iphone-app-for-ar-visualisation/22338 "2022-11-06T17:05:12Z")

</div>

After trying out the WebViewer from my iPhone, I found the AR feature incredibly powerful for realtime visualisation. It would be great is there was an iPhone app specifically to use this AR feature to use on the go, as …

---

## [2D Drawing visualise a woodcut](https://discourse.shapr3d.com/t/2d-drawing-visualise-a-woodcut/22331)

<div class="topic-metadata">

**Author:** [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Replies:** 1\
**Last updated:** [November 6, 2022, 3:50pm UTC](https://discourse.shapr3d.com/t/2d-drawing-visualise-a-woodcut/22331 "2022-11-06T15:50:32Z")

</div>

See picture. This is a diagonal piece of wood, off-plane, with a delicate cute needed to be drawn. I need somehow to zoom in and visualise this from three different 2D Drawings but I can’t comprehend to create a 2D Drawi…

[Previous page](https://discourse.shapr3d.com/latest.md?page=196)

[Next page](https://discourse.shapr3d.com/latest.md?page=198)