# Latest

**URL:** https://discourse.shapr3d.com/latest.md?page=351

[Latest](https://discourse.shapr3d.com/latest.md) · [Categories](https://discourse.shapr3d.com/categories.md) · [Tags](https://discourse.shapr3d.com/tags.md)

**Page:** 352

---

## [Snaps do not work on new planes](https://discourse.shapr3d.com/t/snaps-do-not-work-on-new-planes/2507)

<div class="topic-metadata">

**Author:** [@Sem](https://discourse.shapr3d.com/u/Sem)\
**Replies:** 1\
**Last updated:** [June 11, 2018, 7:55am UTC](https://discourse.shapr3d.com/t/snaps-do-not-work-on-new-planes/2507 "2018-06-11T07:55:26Z")

</div>

It seems that snaps do not work very well on new planes. For example I added a new plane through an edge at an angle and when drawing on the new plane, for some reason I cannot snap to the end points of the edge that the…

---

## [Export to PDF](https://discourse.shapr3d.com/t/export-to-pdf/694)

<div class="topic-metadata">

**Author:** [@brideout](https://discourse.shapr3d.com/u/brideout)\
**Replies:** 9\
**Last updated:** [June 8, 2018, 11:52am UTC](https://discourse.shapr3d.com/t/export-to-pdf/694 "2018-06-08T11:52:40Z")

</div>

New user...It would be a benefit if we could export to PDF formats for those clients without 3d cad software. Is this something I am overlooking? please advise thanks

---

## [1/10 scale Eye Bolt help!](https://discourse.shapr3d.com/t/1-10-scale-eye-bolt-help/2496)

<div class="topic-metadata">

**Author:** [@Twokaw](https://discourse.shapr3d.com/u/Twokaw)\
**Replies:** 5\
**Last updated:** [June 8, 2018, 8:55am UTC](https://discourse.shapr3d.com/t/1-10-scale-eye-bolt-help/2496 "2018-06-08T08:55:30Z")

</div>

I need help creating an eye bolt. This is for a 1/10 scale rc vehicle.

---

## [Stuck and sticking](https://discourse.shapr3d.com/t/stuck-and-sticking/2487)

<div class="topic-metadata">

**Author:** [@Carl](https://discourse.shapr3d.com/u/Carl)\
**Replies:** 10\
**Last updated:** [June 8, 2018, 8:49am UTC](https://discourse.shapr3d.com/t/stuck-and-sticking/2487 "2018-06-08T08:49:44Z")

</div>

\[44A36D75-62FA-44D7-B289-0CB6A8CDAB33\] On TRANSFORM I’m trying to move and it’s gone extruded and stuck Last half an hour … any clues please ? Carl

---

## [Split an edge](https://discourse.shapr3d.com/t/split-an-edge/2495)

<div class="topic-metadata">

**Author:** [@Tenaki](https://discourse.shapr3d.com/u/Tenaki)\
**Replies:** 2\
**Last updated:** [June 7, 2018, 1:19pm UTC](https://discourse.shapr3d.com/t/split-an-edge/2495 "2018-06-07T13:19:58Z")

</div>

I’ve got an edge that i want to do a chamfer for only a portion of it, but am not sure hw to split it. \[02ADB55C-27AB-436A-A56B-5BAD28F47E7D\] Ive attached a screenshot. The red loop is the edge I’m trying to split, and…

---

## [Moving edges not working?](https://discourse.shapr3d.com/t/moving-edges-not-working/2494)

<div class="topic-metadata">

**Author:** [@Lue](https://discourse.shapr3d.com/u/Lue)\
**Replies:** 3\
**Last updated:** [June 7, 2018, 12:16pm UTC](https://discourse.shapr3d.com/t/moving-edges-not-working/2494 "2018-06-07T12:16:44Z")

</div>

https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/23e4a770b851d3af92eb9f46a9dff934c4085454.MOV I watched tutorial and it wasn’t working for me. Am i …

---

## [Shapr3D & Files](https://discourse.shapr3d.com/t/shapr3d-files/1974)

<div class="topic-metadata">

**Author:** [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Replies:** 8\
**Last updated:** [June 7, 2018, 9:17am UTC](https://discourse.shapr3d.com/t/shapr3d-files/1974 "2018-06-07T09:17:51Z")

</div>

When I save a Workspace file on my iPad, it seems to end up in a Folder titled Notability (an app that I have used for years. In Files I can set up a Shapr folder as a sub-folder to Notability but I would like a Shapr to…

---

## [Transform by moving Edge](https://discourse.shapr3d.com/t/transform-by-moving-edge/283)

<div class="topic-metadata">

**Author:** [@Marco](https://discourse.shapr3d.com/u/Marco)\
**Replies:** 8\
**Last updated:** [June 6, 2018, 8:59am UTC](https://discourse.shapr3d.com/t/transform-by-moving-edge/283 "2018-06-06T08:59:36Z")

</div>

Is it possible to transform a solid by moving an edge? If not, it's a feature request :slight\_smile:

---

## [Upgrading to Pro?](https://discourse.shapr3d.com/t/upgrading-to-pro/2388)

<div class="topic-metadata">

**Author:** [@MatthewB](https://discourse.shapr3d.com/u/MatthewB)\
**Replies:** 3\
**Last updated:** [June 4, 2018, 11:59am UTC](https://discourse.shapr3d.com/t/upgrading-to-pro/2388 "2018-06-04T11:59:21Z")

</div>

I will eventually need to upgrade to Pro if I manage to get some medical problems resolved. But currently I only see that it charges for yearly subscription for the Pro upgrade. Is there any way to just pay by the mont…

---

## [How do I realign all my models quickly?](https://discourse.shapr3d.com/t/how-do-i-realign-all-my-models-quickly/2449)

<div class="topic-metadata">

**Author:** [@Tenaki](https://discourse.shapr3d.com/u/Tenaki)\
**Replies:** 2\
**Last updated:** [June 4, 2018, 11:04am UTC](https://discourse.shapr3d.com/t/how-do-i-realign-all-my-models-quickly/2449 "2018-06-04T11:04:48Z")

</div>

Hi! I’ve managed to make all of my models on different heights against the planes… How do I move them all back down? And is there a way to constraint the face of a model to be coincident with an axis? Picture attached…

---

## [Delete Dimension](https://discourse.shapr3d.com/t/delete-dimension/2479)

<div class="topic-metadata">

**Author:** [@Paulmac66](https://discourse.shapr3d.com/u/Paulmac66)\
**Replies:** 1\
**Last updated:** [June 3, 2018, 6:11pm UTC](https://discourse.shapr3d.com/t/delete-dimension/2479 "2018-06-03T18:11:04Z")

</div>

Trying to delete a dimension, only way I can find is to delete the sketch entity it is attached to, which is a bit of a pain, there must be an easier way

---

## [Hidden sketch group shown](https://discourse.shapr3d.com/t/hidden-sketch-group-shown/2473)

<div class="topic-metadata">

**Author:** [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Replies:** 2\
**Last updated:** [June 2, 2018, 2:05pm UTC](https://discourse.shapr3d.com/t/hidden-sketch-group-shown/2473 "2018-06-02T14:05:40Z")

</div>

I get this message a lot and have no idea what it means? As in the following when selecting either of the rectangles. Something good, bad, ugly? An explanation would be appreciated. Thanks, Tommy \[596AF13D-3A28-4A08…

---

## [Simple house modelling](https://discourse.shapr3d.com/t/simple-house-modelling/2472)

<div class="topic-metadata">

**Author:** [@rono](https://discourse.shapr3d.com/u/rono)\
**Replies:** 3\
**Last updated:** [June 1, 2018, 6:54pm UTC](https://discourse.shapr3d.com/t/simple-house-modelling/2472 "2018-06-01T18:54:11Z")

</div>

hi, how to modell a simple house, with a specific roofangle? thank you for helping - rono

---

## [Sketches Groups Request](https://discourse.shapr3d.com/t/sketches-groups-request/2461)

<div class="topic-metadata">

**Author:** [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Replies:** 3\
**Last updated:** [June 1, 2018, 2:28pm UTC](https://discourse.shapr3d.com/t/sketches-groups-request/2461 "2018-06-01T14:28:47Z")

</div>

It would be great if there was a + Interface as in Shapes where you could automatically move selected sketches that are on parallel planes from one named sketch (plane) to another. When doing architectural type drawings…

---

## [Select all and group](https://discourse.shapr3d.com/t/select-all-and-group/2469)

<div class="topic-metadata">

**Author:** [@davidjmaxey](https://discourse.shapr3d.com/u/davidjmaxey)\
**Replies:** 1\
**Last updated:** [June 1, 2018, 2:11pm UTC](https://discourse.shapr3d.com/t/select-all-and-group/2469 "2018-06-01T14:11:06Z")

</div>

I’m importing STEP files for a grand piano that has many complex shapes. Is there a way to select all and group them so that all shapes can be selected moved and scaled as one single unit?

---

## [Centering a circle](https://discourse.shapr3d.com/t/centering-a-circle/2466)

<div class="topic-metadata">

**Author:** [@Jim](https://discourse.shapr3d.com/u/Jim)\
**Replies:** 4\
**Last updated:** [June 1, 2018, 10:28am UTC](https://discourse.shapr3d.com/t/centering-a-circle/2466 "2018-06-01T10:28:28Z")

</div>

Good evening, what is the easiest way to centre a circle in a rectangle. Thanks

---

## [Simple scetch does not fill up](https://discourse.shapr3d.com/t/simple-scetch-does-not-fill-up/2455)

<div class="topic-metadata">

**Author:** [@ralux](https://discourse.shapr3d.com/u/ralux)\
**Replies:** 1\
**Last updated:** [May 31, 2018, 8:10am UTC](https://discourse.shapr3d.com/t/simple-scetch-does-not-fill-up/2455 "2018-05-31T08:10:40Z")

</div>

Hi. I’ve done a simple scetch and when doing in 3D, it does not have the full scope. Please watch the picture. What did I wrong?\[CE74D9D8-8515-48C9-8214-7945FC388906\]

---

## [Newb Q: How do i load/save workspaces?](https://discourse.shapr3d.com/t/newb-q-how-do-i-load-save-workspaces/2381)

<div class="topic-metadata">

**Author:** [@evolver](https://discourse.shapr3d.com/u/evolver)\
**Replies:** 19\
**Last updated:** [May 30, 2018, 2:24pm UTC](https://discourse.shapr3d.com/t/newb-q-how-do-i-load-save-workspaces/2381 "2018-05-30T14:24:15Z")

</div>

I am using the free version of the app. I’m sure i am missing something obvious, but how do i save workspaces out of Shapr3d, and then load them back in? i.e. how do i use Shapr to make more than 3 projects? or is it the…

---

## [Can’t constraint a sketch against 2 edges of a model](https://discourse.shapr3d.com/t/can-t-constraint-a-sketch-against-2-edges-of-a-model/2448)

<div class="topic-metadata">

**Author:** [@Tenaki](https://discourse.shapr3d.com/u/Tenaki)\
**Replies:** 3\
**Last updated:** [May 30, 2018, 1:03pm UTC](https://discourse.shapr3d.com/t/can-t-constraint-a-sketch-against-2-edges-of-a-model/2448 "2018-05-30T13:03:47Z")

</div>

Hi! Playing with the app for the first time, and it is amazing! Running into something that I’m not sure what I’m doing wrong though. I’ve extruded a model, and now in the corner of it, I need to cut through holes (for…

---

## [Total novice needs help quickly!](https://discourse.shapr3d.com/t/total-novice-needs-help-quickly/2446)

<div class="topic-metadata">

**Author:** [@Suehammerland](https://discourse.shapr3d.com/u/Suehammerland)\
**Replies:** 1\
**Last updated:** [May 29, 2018, 10:22pm UTC](https://discourse.shapr3d.com/t/total-novice-needs-help-quickly/2446 "2018-05-29T22:22:29Z")

</div>

Hi everyone out there. I am an old woman who is trying to create a simple 3-d printed 1/16” stencil to use on a series of paintings. It’s basically a border design and I’m trying to finish it before my trial use is over …

---

## [Is a Continuous Groove/Slot on 3 Faces Possible?](https://discourse.shapr3d.com/t/is-a-continuous-groove-slot-on-3-faces-possible/1796)

<div class="topic-metadata">

**Author:** [@GeraldVowles](https://discourse.shapr3d.com/u/GeraldVowles)\
**Replies:** 2\
**Last updated:** [May 29, 2018, 9:02pm UTC](https://discourse.shapr3d.com/t/is-a-continuous-groove-slot-on-3-faces-possible/1796 "2018-05-29T21:02:30Z")

</div>

Hi, Is it possible to make a continuous groove/slot covering three faces of a cylinder like the example? The painted on green line shows roughly where it would go with the dashed line representing the hidden face. \[imag…

---

## ['Safe' .wrl Viewer Recommendations?](https://discourse.shapr3d.com/t/safe-wrl-viewer-recommendations/2444)

<div class="topic-metadata">

**Author:** [@GeraldVowles](https://discourse.shapr3d.com/u/GeraldVowles)\
**Replies:** 0\
**Last updated:** [May 29, 2018, 8:28pm UTC](https://discourse.shapr3d.com/t/safe-wrl-viewer-recommendations/2444 "2018-05-29T20:28:19Z")

</div>

Can anyone recommend a ‘safe’ .wrl viewer for either iPad Pro or OS X? Thanks. Gerry

---

## [Replace face Tool](https://discourse.shapr3d.com/t/replace-face-tool/2432)

<div class="topic-metadata">

**Author:** [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Replies:** 4\
**Last updated:** [May 24, 2018, 2:14pm UTC](https://discourse.shapr3d.com/t/replace-face-tool/2432 "2018-05-24T14:14:19Z")

</div>

In my way of thinking, ‘Project face’ much better describes this tool. The projection is quite useful. One of my frustrations using ‘cutting or removal’ shapes is that it leaves behind unsightly line artifacts. For exam…

---

## [Display group name when selected](https://discourse.shapr3d.com/t/display-group-name-when-selected/2430)

<div class="topic-metadata">

**Author:** [@Paulr](https://discourse.shapr3d.com/u/Paulr)\
**Replies:** 1\
**Last updated:** [May 23, 2018, 4:09pm UTC](https://discourse.shapr3d.com/t/display-group-name-when-selected/2430 "2018-05-23T16:09:16Z")

</div>

Firstly. Thank you for this brilliant product. Please could you tell me if there is a way to identify the group name when you select an object. I see there is a description line at the bottom of the screen but at times …

---

## [Grouping](https://discourse.shapr3d.com/t/grouping/2419)

<div class="topic-metadata">

**Author:** [@Carl](https://discourse.shapr3d.com/u/Carl)\
**Replies:** 4\
**Last updated:** [May 22, 2018, 8:49pm UTC](https://discourse.shapr3d.com/t/grouping/2419 "2018-05-22T20:49:39Z")

</div>

Hi Guys Is there a grouping tutorial that is a little slower ? I’m not the brightest !! I’m not getting the hang of this one :face\_with\_raised\_eyebrow: Thanks in advance Carl

---

## [New to iPad and iOS so please be "gentle"](https://discourse.shapr3d.com/t/new-to-ipad-and-ios-so-please-be-gentle/2411)

<div class="topic-metadata">

**Author:** [@Natarthos](https://discourse.shapr3d.com/u/Natarthos)\
**Replies:** 3\
**Last updated:** [May 22, 2018, 4:44pm UTC](https://discourse.shapr3d.com/t/new-to-ipad-and-ios-so-please-be-gentle/2411 "2018-05-22T16:44:20Z")

</div>

I have downloaded the Sharpr3D app onto my iPad Pro and I cannot begin to express how happy I am to be able to work on my iPad; it is the answer to a LONG standing problem. I looked at the site and saw that there is pri…

---

## [Dimension Focus Request](https://discourse.shapr3d.com/t/dimension-focus-request/2374)

<div class="topic-metadata">

**Author:** [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Replies:** 3\
**Last updated:** [May 22, 2018, 2:32pm UTC](https://discourse.shapr3d.com/t/dimension-focus-request/2374 "2018-05-22T14:32:40Z")

</div>

Even simple sketches produce a lot of dimensions when selected. \[4C2DD9EB-3CC0-406F-8114-CC6AEFE47292\] I know that I can move the labels around but still it is tedious to find a specific dimension out of many. A Focus…

---

## [Internal screw threads and knurling](https://discourse.shapr3d.com/t/internal-screw-threads-and-knurling/2383)

<div class="topic-metadata">

**Author:** [@tadream](https://discourse.shapr3d.com/u/tadream)\
**Replies:** 7\
**Last updated:** [May 21, 2018, 3:56am UTC](https://discourse.shapr3d.com/t/internal-screw-threads-and-knurling/2383 "2018-05-21T03:56:04Z")

</div>

How do i create an internal thread. I wish to draw an hexagon shaped nut such as would be screwed onto the end of a bolt. Thank you for help, i am still in my trial period and i need to find a way to do this. I can crea…

---

## [Why I can’t sweep](https://discourse.shapr3d.com/t/why-i-can-t-sweep/2393)

<div class="topic-metadata">

**Author:** [@XingAn](https://discourse.shapr3d.com/u/XingAn)\
**Replies:** 2\
**Last updated:** [May 20, 2018, 5:58pm UTC](https://discourse.shapr3d.com/t/why-i-can-t-sweep/2393 "2018-05-20T17:58:26Z")

</div>

\[8BE0C60F-3E36-43D9-84B8-DED8061B760C\] Like this situation

---

## [Handbag design](https://discourse.shapr3d.com/t/handbag-design/2362)

<div class="topic-metadata">

**Author:** [@OBJ](https://discourse.shapr3d.com/u/OBJ)\
**Replies:** 1\
**Last updated:** [May 13, 2018, 9:25pm UTC](https://discourse.shapr3d.com/t/handbag-design/2362 "2018-05-13T21:25:06Z")

</div>

Does anyone use this app to design handbags?

[Previous page](https://discourse.shapr3d.com/latest.md?page=350)

[Next page](https://discourse.shapr3d.com/latest.md?page=352)