# 2025 Sweep final angle problem

**URL:** <https://discourse.shapr3d.com/t/2025-sweep-final-angle-problem/38085>\
**Category:** Modeling Questions\
**Created:** [May 23, 2025, 1:13am UTC](https://discourse.shapr3d.com/t/2025-sweep-final-angle-problem/38085 "2025-05-23T01:13:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Raul](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@Raul](https://discourse.shapr3d.com/u/Raul)\
**Post date:** [May 23, 2025, 1:13am UTC](https://discourse.shapr3d.com/t/2025-sweep-final-angle-problem/38085/1 "2025-05-23T01:13:32Z")

</div>

I had read some post about this problem in 2017, but it still happens for me, I don’t know if they fixed or if there is a new way to do this, but: I’m traying to do this easy SWEEP, and my shape finish in an incorrect angle at the end of the spline.

I was waiting both sides of the sweep finish align with the axis…

so… If I close al the shape the Sweep keep this error:

I spouse that is the system traying to fix the problem … but is no clean  
Any help well be appreciated

 ![Half Seep, and Complete](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/5/656da0bec61a44d0189bdb4fbefc892f6eee2b9a.jpeg)

---

<div class="post-metadata">

**Author:** ![kabocha](https://avatars.discourse-cdn.com/v4/letter/k/f04885/32.png) [@kabocha](https://discourse.shapr3d.com/u/kabocha)\
**Post date:** [May 23, 2025, 6:04am UTC](https://discourse.shapr3d.com/t/2025-sweep-final-angle-problem/38085/2 "2025-05-23T06:04:59Z")

</div>

Hi, your curves might be too curvy for the sweep and they meet very sharply. You could also sketch what you need, extrude and chamfer.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/c/3c5c8125208c3e73643cec4ee9cdc711c6980605.png)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 23, 2025, 6:39am UTC](https://discourse.shapr3d.com/t/2025-sweep-final-angle-problem/38085/3 "2025-05-23T06:39:54Z")

</div>

Just put a profile for sweep in appropriate place

 ![IMG_0101](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/a/6afce4e14e76f1ecd6fe1eb940576b66867f2c6f.jpeg)