# 26.210 – Introducing the Thread tool, new sketch tools, expanded import support, and workflow improvements

**URL:** <https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641>\
**Category:** Release notes\
**Created:** [November 11, 2026, 9:49am UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641 "2026-11-11T09:49:17Z")\
**Posts on this page:** 9\
**Page:** 3

<div class="post-metadata">

**Author:** ![pgmaker](https://avatars.discourse-cdn.com/v4/letter/p/e495f1/32.png) [@pgmaker](https://discourse.shapr3d.com/u/pgmaker)\
**Post date:** [November 14, 2026, 8:58am UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/42 "2026-11-14T08:58:41Z")

</div>

Dead Shapr3D Team,  
This is great!  
I just tried it, and these are my thoughts:

- very intuitive

- easy to use

- not so intuitive: Generating a hole and a bolt at the same time. I made a cylindrical whole and a cylinder same diameter (I guess seeing you video it is easier to make the cylinder way smaller diameter and then choose the right thread size), but when I choose both faces and create the threads at the same time, the one on the bolt is rotated by 180° so i had to rotate the bolt 180° so they align. The image i post is without rotating. This also happens when I create the threads one after another.

---

<div class="post-metadata">

**Author:** ![fortis3dllc](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fortis3dllc](https://discourse.shapr3d.com/u/fortis3dllc)\
**Post date:** [November 14, 2026, 11:33pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/43 "2026-11-14T23:33:11Z")

</div>

I’ve tried this thread tool multiple times and my prints are not working at all. The bolt is not even starting. Has anyone successfully made a print? did you adjust measurements on either the bolt or the hole for the nut (receiving body)? Please help

---

<div class="post-metadata">

**Author:** ![fortis3dllc](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fortis3dllc](https://discourse.shapr3d.com/u/fortis3dllc)\
**Post date:** [November 14, 2026, 11:34pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/44 "2026-11-14T23:34:17Z")

</div>

Were you able to make a successful print?

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 15, 2026, 4:10am UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/45 "2026-11-15T04:10:00Z")

</div>

Yes. my M6 hole was precise. A bit snug but still worked fine. X1C and X2D. Both vertical and horizontiI. would like to see tolerance added to threaded holes.

---

<div class="post-metadata">

**Author:** ![mjabsk](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@mjabsk](https://discourse.shapr3d.com/u/mjabsk)\
**Post date:** [November 15, 2026, 9:36pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/46 "2026-11-15T21:36:12Z")

</div>

No, tried a few times with different materials and haven’t gotten any to work together yet

---

<div class="post-metadata">

**Author:** ![MAXXCREEPER](https://avatars.discourse-cdn.com/v4/letter/m/9fc29f/32.png) [@MAXXCREEPER](https://discourse.shapr3d.com/u/MAXXCREEPER)\
**Post date:** [November 16, 2026, 2:59am UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/47 "2026-11-16T02:59:06Z")

</div>

i tried m20 thread but its to tight of course when i do section view its so close and there is no room for expansion so that will need to be alliterated

---

<div class="post-metadata">

**Author:** ![moe1](https://avatars.discourse-cdn.com/v4/letter/m/7bcc69/32.png) [@moe1](https://discourse.shapr3d.com/u/moe1)\
**Post date:** [November 16, 2026, 1:09pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/48 "2026-11-16T13:09:30Z")

</div>

I havent tried, didnt make sense to me without being able to add tolerances.

---

<div class="post-metadata">

**Author:** ![fortis3dllc](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fortis3dllc](https://discourse.shapr3d.com/u/fortis3dllc)\
**Post date:** [November 16, 2026, 2:54pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/49 "2026-11-16T14:54:33Z")

</div>

#Update#

After applying the thread tool to both the bolt and nut, I then tested adding an offset to the nut. I was printing an M10 bolt. I tested with 0.25mm, 0.20mm, 0.15mm offsets. All 3 nuts worked fine so in conclusion, there needs to be an additional offset step added. I haven’t tested with anything less than 0.15mm. By the way, I am printing with a Bambulab P1S

With a bigger bolt, I assume that the offset will be different. More testing to come…

@Jeriz Happy to collaborate on this!

---

<div class="post-metadata">

**Author:** ![MAXXCREEPER](https://avatars.discourse-cdn.com/v4/letter/m/9fc29f/32.png) [@MAXXCREEPER](https://discourse.shapr3d.com/u/MAXXCREEPER)\
**Post date:** [November 16, 2026, 8:33pm UTC](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641/50 "2026-11-16T20:33:42Z")

</div>

what material did you use? i used PETG and moved the female walls .2 away from the screw and was to tight might try .4

[Previous page](https://discourse.shapr3d.com/t/26-210-introducing-the-thread-tool-new-sketch-tools-expanded-import-support-and-workflow-improvements/42641.md?page=2)
