# 2D Drawing Sweep Radius

**URL:** <https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084>\
**Category:** Modeling Questions\
**Created:** [August 24, 2022, 8:46pm UTC](https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084 "2022-08-24T20:46:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PFI-Stark](https://avatars.discourse-cdn.com/v4/letter/p/bbce88/32.png) [@PFI-Stark](https://discourse.shapr3d.com/u/PFI-Stark)\
**Post date:** [August 24, 2022, 8:46pm UTC](https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084/1 "2022-08-24T20:46:13Z")

</div>

I am creating a tube with bending requirements at specific size radius corners, etc. (90°, 30°, 15.5°) but I’m unable to figure out a way to get Shapr Drawing to identify anything about the corners for dimensions, angles, radius, etc. anything at all really… any ideas out there?

---

<div class="post-metadata">

**Author:** ![Yepher](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/yepher/32/8902_2.png) [@Yepher](https://discourse.shapr3d.com/u/Yepher)\
**Post date:** [August 25, 2022, 10:22pm UTC](https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084/2 "2022-08-25T22:22:09Z")

</div>

Do you have a picture for what you are trying to do? I can’t tell if you are trying to make a dimensioned 2D drawing or a 3D drawing.

---

<div class="post-metadata">

**Author:** ![PFI-Stark](https://avatars.discourse-cdn.com/v4/letter/p/bbce88/32.png) [@PFI-Stark](https://discourse.shapr3d.com/u/PFI-Stark)\
**Post date:** [August 26, 2022, 12:38am UTC](https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084/3 "2022-08-26T00:38:56Z")

</div>

I’ve attached the 2D Drawings. I’ve tried everything I know of to get the radii to display and the center mark etc. They just don’t…  
[Exhaust Bulkhead Tube.pdf](https://discourse.shapr3d.com/uploads/short-url/35EfCcFfPk36jySurhUNG2CKzvz.pdf) (132.5 KB)  
[TC V4 38 Tube-Long Input Copy.pdf](https://discourse.shapr3d.com/uploads/short-url/pNFE9nTZWX69dQL6k058HafCd58.pdf) (283.9 KB)

---

<div class="post-metadata">

**Author:** ![PFI-Stark](https://avatars.discourse-cdn.com/v4/letter/p/bbce88/32.png) [@PFI-Stark](https://discourse.shapr3d.com/u/PFI-Stark)\
**Post date:** [August 26, 2022, 1:40pm UTC](https://discourse.shapr3d.com/t/2d-drawing-sweep-radius/21084/4 "2022-08-26T13:40:02Z")

</div>

Here’s a video of the problem.