# 2d section drawing problem!

**URL:** <https://discourse.shapr3d.com/t/2d-section-drawing-problem/19147>\
**Category:** Modeling Questions\
**Created:** [May 4, 2022, 12:44am UTC](https://discourse.shapr3d.com/t/2d-section-drawing-problem/19147 "2022-05-04T00:44:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Drool624](https://avatars.discourse-cdn.com/v4/letter/d/7ea924/32.png) [@Drool624](https://discourse.shapr3d.com/u/Drool624)\
**Post date:** [May 4, 2022, 12:44am UTC](https://discourse.shapr3d.com/t/2d-section-drawing-problem/19147/1 "2022-05-04T00:44:51Z")

</div>

I cant export a 2d section drawing on only one of my drawings?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/632f3f8f6d718eb58267c34694095e9df7a43a06.jpeg)

---

<div class="post-metadata">

**Author:** ![PEC](https://avatars.discourse-cdn.com/v4/letter/p/67e7ee/32.png) [@PEC](https://discourse.shapr3d.com/u/PEC)\
**Post date:** [May 4, 2022, 8:32am UTC](https://discourse.shapr3d.com/t/2d-section-drawing-problem/19147/2 "2022-05-04T08:32:07Z")

</div>

Hi Drool624

you problem rings a bell for a similar issue posted on the forum.  
The root cause was a weird and invalid geometry in the cut body.  
Please have a look at

> [@Pdf export failed](https://discourse.shapr3d.com/t/pdf-export-failed/18031/10):
>
> Hi, I reproduced your problem: as soon as you add a cross section view in the drawing with your design, you can no longer export the pdf. The root cause of the problem is a weird geometry in the design (but it should not prevent from exporting the pdf, so there are actually also a corner case’s bug in drawing wink). If you make a cross section and zoom you will see there is actually a small hole in the design. Best way to fix your design is to split …

If it doesn’t help, could you share the .shapr project? I will have a look tonight.

---

<div class="post-metadata">

**Author:** ![H\_Daniel](https://avatars.discourse-cdn.com/v4/letter/h/7993a0/32.png) [@H\_Daniel](https://discourse.shapr3d.com/u/H_Daniel)\
**Post date:** [May 4, 2022, 8:59am UTC](https://discourse.shapr3d.com/t/2d-section-drawing-problem/19147/3 "2022-05-04T08:59:11Z")

</div>

Hi Drool624!  
Could you please share your workspace to investigate the issue?