# 2D sketches

**URL:** <https://discourse.shapr3d.com/t/2d-sketches/15752>\
**Category:** Modeling Questions\
**Created:** [November 8, 2021, 7:48pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752 "2021-11-08T19:48:38Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Islam](https://avatars.discourse-cdn.com/v4/letter/i/bc79bd/32.png) [@Islam](https://discourse.shapr3d.com/u/Islam)\
**Post date:** [November 8, 2021, 7:48pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/1 "2021-11-08T19:48:38Z")

</div>

How to create more than 1 sketch sheet in one drawing file?

---

<div class="post-metadata">

**Author:** ![alaayed](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/alaayed/32/12380_2.png) [@alaayed](https://discourse.shapr3d.com/u/alaayed)\
**Post date:** [November 11, 2021, 9:31pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/2 "2021-11-11T21:31:27Z")

</div>

If I understood what you mean, it is by creating a separate space between the drawings that you draw. And controlling this through the layers. Or bringing a file that was previously saved on a file on which the drawing will be made on the work floor.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/6d763909428df9e65f7a31aadee1bef7376a729e.jpeg)

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [November 13, 2021, 7:46pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/3 "2021-11-13T19:46:34Z")

</div>

I believe the OP is asking in regards to drawing sheets in the 2D module, in which case I don’t believe there is a way yet.

---

<div class="post-metadata">

**Author:** ![alaayed](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/alaayed/32/12380_2.png) [@alaayed](https://discourse.shapr3d.com/u/alaayed)\
**Post date:** [November 14, 2021, 6:45pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/4 "2021-11-14T18:45:23Z")

</div>

Your rollout may be correct

---

<div class="post-metadata">

**Author:** ![Islam](https://avatars.discourse-cdn.com/v4/letter/i/bc79bd/32.png) [@Islam](https://discourse.shapr3d.com/u/Islam)\
**Post date:** [November 14, 2021, 6:58pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/5 "2021-11-14T18:58:39Z")

</div>

I think you got my point

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [November 14, 2021, 10:29pm UTC](https://discourse.shapr3d.com/t/2d-sketches/15752/6 "2021-11-14T22:29:29Z")

</div>

You can make multiple drawings, but only one sheet per drawing. As far as I’m aware…