# 30 degree chamfer edge?

**URL:** <https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254>\
**Category:** Modeling Questions\
**Created:** [July 29, 2019, 12:18pm UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254 "2019-07-29T12:18:57Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![RaymondW](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RaymondW](https://discourse.shapr3d.com/u/RaymondW)\
**Post date:** [July 29, 2019, 12:18pm UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/1 "2019-07-29T12:18:57Z")

</div>

I am drawing a table with 30 degrees slope edge, but the default chamfer on edge is 45 degree, your advice please.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/7/7d54d8272327dfe530eb00925fc15ea9981a9222.jpeg)

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [July 29, 2019, 12:53pm UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/2 "2019-07-29T12:53:55Z")

</div>

Draw a profile and sweep it along the table, subtract, done 👍🏻

---

<div class="post-metadata">

**Author:** ![RaymondW](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RaymondW](https://discourse.shapr3d.com/u/RaymondW)\
**Post date:** [July 29, 2019, 3:04pm UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/3 "2019-07-29T15:04:39Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/d/d0f748dc68c8337510aa5a98a109d2b49edb8856.jpeg)

---

<div class="post-metadata">

**Author:** ![RaymondW](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RaymondW](https://discourse.shapr3d.com/u/RaymondW)\
**Post date:** [July 30, 2019, 4:42am UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/4 "2019-07-30T04:42:38Z")

</div>

But problem is that the table is arc edging, I don’t see any way to build a profile and sweep it…

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [July 30, 2019, 5:28am UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/5 "2019-07-30T05:28:47Z")

</div>

The Extrude tool will allow you to use any angle you like whereas a chamfer is fixed at 45°. Here’s a simple example.  
Regards, Mike

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f876fad7dc1be174958fd23e7803e840f118418d.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f876fad7dc1be174958fd23e7803e840f118418d.mov)

---

<div class="post-metadata">

**Author:** ![RaymondW](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RaymondW](https://discourse.shapr3d.com/u/RaymondW)\
**Post date:** [July 30, 2019, 5:45am UTC](https://discourse.shapr3d.com/t/30-degree-chamfer-edge/5254/6 "2019-07-30T05:45:12Z")

</div>

Thanks Mike, appreciate your help, thanks again!!🙏