# 3d printer

**URL:** <https://discourse.shapr3d.com/t/3d-printer/13834>\
**Category:** Modeling Questions\
**Created:** [July 13, 2021, 8:28pm UTC](https://discourse.shapr3d.com/t/3d-printer/13834 "2021-07-13T20:28:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Germena](https://avatars.discourse-cdn.com/v4/letter/g/ccd318/32.png) [@Germena](https://discourse.shapr3d.com/u/Germena)\
**Post date:** [July 13, 2021, 8:28pm UTC](https://discourse.shapr3d.com/t/3d-printer/13834/1 "2021-07-13T20:28:28Z")

</div>

Why every time I export a model from shaper 3d to my 3d printer slicer it turn to be too small

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [July 13, 2021, 8:40pm UTC](https://discourse.shapr3d.com/t/3d-printer/13834/2 "2021-07-13T20:40:28Z")

</div>

Try to change units

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/d/d8278c0bdfcd60a9e98b54a19172fa8bfadff40e.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/261d3c41e8f6d60469c686022983763abd18032b.jpeg)