# 4.0.1 - Hotfix: 2D drawings

**URL:** <https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788>\
**Category:** Modeling Questions\
**Created:** [March 10, 2021, 10:49am UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788 "2021-03-10T10:49:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Miharu\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/miharu_shapr3d/32/6419_2.png) [@Miharu\_Shapr3D](https://discourse.shapr3d.com/u/Miharu_Shapr3D)\
**Post date:** [March 10, 2021, 10:49am UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788/1 "2021-03-10T10:49:03Z")

</div>

Hi again!

We whipped up a hotfix for [our latest release](https://discourse.shapr3d.com/t/4-0-2d-drawings-new-pricing/11730). Sad to say, a bug managed to slip in: The dimensions of objects measured in architectural units were different in the drawing sheet than in the design space. With the newest 4.0.1 update, they should be in working order.

ℹ But before you go back to the drawing board, remember that the dimensions in the design space are rounded to 3 decimal places, while dimensions in the drawing sheet are rounded to 2 decimal places. So, that means 3.847 inches in the design space is shown as 3.85 inches in the drawing sheet.

---

<div class="post-metadata">

**Author:** ![rammohanp.p](https://avatars.discourse-cdn.com/v4/letter/r/e56c9b/32.png) [@rammohanp.p](https://discourse.shapr3d.com/u/rammohanp.p)\
**Post date:** [March 10, 2021, 10:58am UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788/2 "2021-03-10T10:58:35Z")

</div>

Appreciate the quick fix.

---

<div class="post-metadata">

**Author:** ![Rogerlj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rogerlj/32/4065_2.png) [@Rogerlj](https://discourse.shapr3d.com/u/Rogerlj)\
**Post date:** [March 10, 2021, 2:33pm UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788/3 "2021-03-10T14:33:46Z")

</div>

Is there any chance that the decimal position will be out to the 3rd or even 4th position in the near future? I love the new 2D drawings that I’ve hoped and waited so long for, but rounding to the second position doesn’t work at all in my line of production and repair. All parts are +/- .002 that needs to be visible on the print and thrust bearings are lapped to .0002, +0, -.0002  
Really need that 3rd decimal place in the worst way.

---

<div class="post-metadata">

**Author:** ![Miharu\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/miharu_shapr3d/32/6419_2.png) [@Miharu\_Shapr3D](https://discourse.shapr3d.com/u/Miharu_Shapr3D)\
**Post date:** [March 12, 2021, 8:52am UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788/4 "2021-03-12T08:52:54Z")

</div>

Thanks for sharing! I’ve forwarded your question to the team, so they can look into this.

---

<div class="post-metadata">

**Author:** ![Steamflyer](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@Steamflyer](https://discourse.shapr3d.com/u/Steamflyer)\
**Post date:** [March 12, 2021, 2:15pm UTC](https://discourse.shapr3d.com/t/4-0-1-hotfix-2d-drawings/11788/5 "2021-03-12T14:15:52Z")

</div>

Agree - have prints with 2, 3, and four significant digits. Need symmetric and asymmetric tolerances to make this feature valuable.