# Add Bodies

**URL:** <https://discourse.shapr3d.com/t/add-bodies/21869>\
**Category:** Modeling Questions\
**Created:** [October 11, 2022, 7:21pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869 "2022-10-11T19:21:09Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rogerlj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rogerlj/32/4065_2.png) [@Rogerlj](https://discourse.shapr3d.com/u/Rogerlj)\
**Post date:** [October 11, 2022, 7:21pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/1 "2022-10-11T19:21:09Z")

</div>

When “Adding Bodies” in my drawing they never showed up. It showed them selected but never appeared in my drawing. Am I doing something wrong?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/f/9f4adfc94e5440ff6fb5998535451367c50b5d18.jpeg)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [October 11, 2022, 7:23pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/2 "2022-10-11T19:23:17Z")

</div>

Hi @Rogerlj , just to make sure that I understand correctly: you click on any of the views in the bottom and nothing happens, right?

---

<div class="post-metadata">

**Author:** ![Rogerlj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rogerlj/32/4065_2.png) [@Rogerlj](https://discourse.shapr3d.com/u/Rogerlj)\
**Post date:** [October 11, 2022, 7:31pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/3 "2022-10-11T19:31:14Z")

</div>

No, I needed to add the 3 nuts you now can see on the under side of the lifting fixture but they never appeared on the drawing though they appeared highlighted on the 3D model. All the view buttons seem to work. There’s a really good chance I’m doing something wrong, just not sure what it is? I ended up starting the drawing over from scratch since it was quite simple anyway and just captured all features in my new draft.

On another note… when I had 2 drawings they both read 1of 1 in the title block when I expected a 1 of 2 and 2 of 2. But I’m down to 1 drawing now anyway so that no longer really matters for this project.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [October 11, 2022, 7:34pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/4 "2022-10-11T19:34:00Z")

</div>

Are you doing it like this?

---

<div class="post-metadata">

**Author:** ![Rogerlj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rogerlj/32/4065_2.png) [@Rogerlj](https://discourse.shapr3d.com/u/Rogerlj)\
**Post date:** [October 11, 2022, 7:38pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/5 "2022-10-11T19:38:23Z")

</div>

Well I just did a quick second test and I was doing something wrong. My test worked just fine and I was able to add to my drawing.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [October 11, 2022, 7:38pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/6 "2022-10-11T19:38:50Z")

</div>

Great news! 🙂

---

<div class="post-metadata">

**Author:** ![Rogerlj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rogerlj/32/4065_2.png) [@Rogerlj](https://discourse.shapr3d.com/u/Rogerlj)\
**Post date:** [October 11, 2022, 7:40pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/7 "2022-10-11T19:40:06Z")

</div>

Thanks for such a fast response!

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [October 11, 2022, 7:42pm UTC](https://discourse.shapr3d.com/t/add-bodies/21869/8 "2022-10-11T19:42:14Z")

</div>

Always happy to help!