# Adding Diameter Measurement to Revolve

**URL:** <https://discourse.shapr3d.com/t/adding-diameter-measurement-to-revolve/28889>\
**Category:** Feature requests\
**Created:** [November 13, 2023, 11:05am UTC](https://discourse.shapr3d.com/t/adding-diameter-measurement-to-revolve/28889 "2023-11-13T11:05:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JessNolte](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jessnolte/32/23586_2.png) [@JessNolte](https://discourse.shapr3d.com/u/JessNolte)\
**Post date:** [November 13, 2023, 11:05am UTC](https://discourse.shapr3d.com/t/adding-diameter-measurement-to-revolve/28889/1 "2023-11-13T11:05:45Z")

</div>

Please follow the format below for requesting a feature.

**The problem that this feature will solve:**

Allow you to make conical compression springs, flat coils and other conical revolve components.

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/2/225af08f2690510bdc41ebebfdc35880aa61c34c.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/1/d11576167c2387c94dd016ba772777f84d77390d.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/c/5cae801f0b5d6084b1e65e0d8334adb0749d46ba.jpeg)

**Brief description of the outcomes that you expect from this feature:**

To be able to adjust height, diameter and rotation degrees of a revolve in real time

**What can’t you achieve without this feature?**

Have no clue if is even possible to make any of the above with this addition. Possibly with out lots of planes and sketches.

_Is this a workflow blocker for you? Is this why you can’t use Shapr3D for work? Is this slowing you down?_

Is definitely limiting my design progress. Think it will be useful for others too