# Align Endpoints in Sketch

**URL:** <https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583>\
**Category:** Modeling Questions\
**Created:** [June 29, 2025, 5:40pm UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583 "2025-06-29T17:40:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Garnet](https://avatars.discourse-cdn.com/v4/letter/g/9de0a6/32.png) [@Garnet](https://discourse.shapr3d.com/u/Garnet)\
**Post date:** [June 29, 2025, 5:40pm UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583/1 "2025-06-29T17:40:24Z")

</div>

I’ve highlighted four points (orange) that I’d like aligned horizontally, but the alignment tool is greyed out. How do I align these? tx

 ![1](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/7/476ddee5417e8820e5ea5e5b8832121490b25a9f.png)

---

<div class="post-metadata">

**Author:** ![GroMark](https://avatars.discourse-cdn.com/v4/letter/g/4491bb/32.png) [@GroMark](https://discourse.shapr3d.com/u/GroMark)\
**Post date:** [June 29, 2025, 5:42pm UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583/2 "2025-06-29T17:42:01Z")

</div>

You draw a line between the two points (ideally a construction line), click that line and then click on horizontal/vertical. That constraint is made for lines, not points.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [June 29, 2025, 5:42pm UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583/3 "2025-06-29T17:42:47Z")

</div>

Add construction line. Make it horizontal and coincidence to highlighted points.

Or in your particular case you can make right points coincidence to axis and then make a mirror.

---

<div class="post-metadata">

**Author:** ![Garnet](https://avatars.discourse-cdn.com/v4/letter/g/9de0a6/32.png) [@Garnet](https://discourse.shapr3d.com/u/Garnet)\
**Post date:** [June 30, 2025, 7:54am UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583/4 "2025-06-30T07:54:02Z")

</div>

Got it, thank you.

Although the instructions I found said to make a normal line, then highlight it and click the Make Construction button. I couldn’t find a Construction Line icon, so went with that method.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 30, 2025, 8:38am UTC](https://discourse.shapr3d.com/t/align-endpoints-in-sketch/38583/5 "2025-06-30T08:38:45Z")

</div>

There is construction on and off toggle on the other side.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/8/28e788477fb3338a496de8da577c18bf7f960da6.png)