# Aligning with Construct Axis

**URL:** https://discourse.shapr3d.com/t/aligning-with-construct-axis/41557
**Category:** Modeling Questions
**Created:** [August 30, 2026, 2:29pm UTC](https://discourse.shapr3d.com/t/aligning-with-construct-axis/41557 "2026-08-30T14:29:49Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![enicastro](https://avatars.discourse-cdn.com/v4/letter/e/67e7ee/32.png) [@enicastro](https://discourse.shapr3d.com/u/enicastro)
#### Post date: [August 30, 2026, 2:29pm UTC](https://discourse.shapr3d.com/t/aligning-with-construct-axis/41557/1 "2026-08-30T14:29:49Z")

</div>

I understand there is probably a better way to do this or a completely different process than what I’m trying to do (I’m newish and still learning). But I want to align the center of this cylinder to the cross section of my Construct Axis’. I have these laid out for alignment for studs and holes to go through the body.

 ![IMG_0197](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/6/665e9217693dadacd01f6a13265c1d4a08af9704.jpeg)

---

<div class="post-metadata">

### Author: ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)
#### Post date: [August 30, 2026, 3:15pm UTC](https://discourse.shapr3d.com/t/aligning-with-construct-axis/41557/2 "2026-08-30T15:15:59Z")

</div>

Project your axis’ to sketch and align to that sketch.’