# Analysis

**URL:** <https://discourse.shapr3d.com/t/analysis/12242>\
**Category:** Modeling Questions\
**Created:** [April 9, 2021, 5:42pm UTC](https://discourse.shapr3d.com/t/analysis/12242 "2021-04-09T17:42:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mustafa](https://avatars.discourse-cdn.com/v4/letter/m/f19dbf/32.png) [@Mustafa](https://discourse.shapr3d.com/u/Mustafa)\
**Post date:** [April 9, 2021, 5:42pm UTC](https://discourse.shapr3d.com/t/analysis/12242/1 "2021-04-09T17:42:47Z")

</div>

İn the creo you can change dimensions via excel. Can we do it shapr3d

[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/0/e0078ce99ae38a51825cce606930f7c086c4c0ba.jpeg "EXCEL TO CREO LINKAGE") ](https://www.youtube.com/watch?v=iqiQJAQu7xo)

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [April 9, 2021, 8:05pm UTC](https://discourse.shapr3d.com/t/analysis/12242/2 "2021-04-09T20:05:20Z")

</div>

Since Shapr3D is a direct modeling application and not parametric, it’s not really designed to support this as far as I know. I’m sure someone will correct me if I’m wrong.

---

<div class="post-metadata">

**Author:** ![Mustafa](https://avatars.discourse-cdn.com/v4/letter/m/f19dbf/32.png) [@Mustafa](https://discourse.shapr3d.com/u/Mustafa)\
**Post date:** [April 9, 2021, 8:23pm UTC](https://discourse.shapr3d.com/t/analysis/12242/3 "2021-04-09T20:23:39Z")

</div>

😔sharpr3d very powerful with ipad. İf you are right there is no solution for me with shapr3d

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [April 12, 2021, 7:57am UTC](https://discourse.shapr3d.com/t/analysis/12242/4 "2021-04-12T07:57:46Z")

</div>

Hi @Mustafa, I can confirm that this feature is a parametric tool which not available in Shapr3D ☹