# Angle

**URL:** <https://discourse.shapr3d.com/t/angle/704>\
**Category:** Modeling Questions\
**Created:** [January 17, 2017, 12:07am UTC](https://discourse.shapr3d.com/t/angle/704 "2017-01-17T00:07:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![evj](https://avatars.discourse-cdn.com/v4/letter/e/cdc98d/32.png) [@evj](https://discourse.shapr3d.com/u/evj)\
**Post date:** [January 17, 2017, 12:07am UTC](https://discourse.shapr3d.com/t/angle/704/1 "2017-01-17T00:07:00Z")

</div>

how can I see the angle between two lines. I get length of a line but no angles.

---

<div class="post-metadata">

**Author:** ![DuffleBag](https://avatars.discourse-cdn.com/v4/letter/d/c2a13f/32.png) [@DuffleBag](https://discourse.shapr3d.com/u/DuffleBag)\
**Post date:** [January 17, 2017, 3:08am UTC](https://discourse.shapr3d.com/t/angle/704/2 "2017-01-17T03:08:53Z")

</div>

1. Make sure that you are in “edit sketch” mode.
2. It should be as simple as selecting both lines (they both turn blue)
3. The angle measurement will just show up

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/9a87a0f1f4a164a855334bc08bbf112d5c259c65.PNG)

If this doesn’t happenn, zoom in and make sure the two lines are actually connected… I have had two lines that I “thought” were connected actually be just “really really close”