# Any feature ideas?

**URL:** <https://discourse.shapr3d.com/t/any-feature-ideas/15>\
**Category:** Modeling Questions\
**Created:** [January 26, 2016, 10:09am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15 "2016-01-26T10:09:43Z")\
**Posts on this page:** 20\
**Page:** 12

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [January 1, 2017, 8:34pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/224 "2017-01-01T20:34:02Z")

</div>

Yes, that could be an option in the boolean tools.

---

<div class="post-metadata">

**Author:** ![hamedtopic](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/hamedtopic/32/3371_2.png) [@hamedtopic](https://discourse.shapr3d.com/u/hamedtopic)\
**Post date:** [January 2, 2017, 11:00am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/225 "2017-01-02T11:00:15Z")

</div>

STL, OBJ, or any regular mesh files editing options, critical

---

<div class="post-metadata">

**Author:** ![Abqmichaelj](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Abqmichaelj](https://discourse.shapr3d.com/u/Abqmichaelj)\
**Post date:** [January 14, 2017, 10:41pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/226 "2017-01-14T22:41:46Z")

</div>

Better options for constraining arcs. Like lock down center point, limit angle subtended, or even make tangent. Though there’s a tutorial on rounding off the corner to a box, the software is “too smart” to make that reliable. The arc will suddenly pop out of the corner, flipping from 90 deg to a 270 arc and then resisting all attempts to stuff it back in place. I can think of several ways an arc could be defined without the singularity and two points and a radius is not one of them.

---

<div class="post-metadata">

**Author:** ![Abqmichaelj](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Abqmichaelj](https://discourse.shapr3d.com/u/Abqmichaelj)\
**Post date:** [January 14, 2017, 10:45pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/227 "2017-01-14T22:45:12Z")

</div>

Better save/load options. Like a way to separate my drawing into several files then loading them together later. A better way to save versions than exporting. Or even just a way to name the export file.

---

<div class="post-metadata">

**Author:** ![Virtuousdeity](https://avatars.discourse-cdn.com/v4/letter/v/d2c977/32.png) [@Virtuousdeity](https://discourse.shapr3d.com/u/Virtuousdeity)\
**Post date:** [January 20, 2017, 3:31pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/228 "2017-01-20T15:31:03Z")

</div>

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/cc552c4317ffe11cce9768ddd08ead9cd0a63325.jpg)

A recent update was released, but I haven’t noticed anything different in the description or in the performance of the app. Likewise, as simple as this Boolean option is to add to the program, it has not been included. When will you be able to do this? I have had to stop my on going project for the design of an invention, because of this feature remaining inaccessible.

When I finalize subtraction, I need an option to keep my “subtracted object” in place so that I can merge it with a different object and create a socket clip. Please, try to include this in the next update. Thank you.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [January 20, 2017, 3:45pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/229 "2017-01-20T15:45:10Z")

</div>

The next release will include new constraints (symmetry, tangent), trimming of curves, and an option to select the boolean operation when extruding (new object, cut, intersect, unite). After that we might going to be able to do that. But actually you can easily move and copy the object with a two taps, and than subtract the original and move the copied back to place. Wouldn’t that work for you?

---

<div class="post-metadata">

**Author:** ![Yorkshireman](https://avatars.discourse-cdn.com/v4/letter/y/3ab097/32.png) [@Yorkshireman](https://discourse.shapr3d.com/u/Yorkshireman)\
**Post date:** [January 20, 2017, 9:32pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/230 "2017-01-20T21:32:55Z")

</div>

Ah, that’s really good then. It’s not too obvious that the only thing extra in the Pro version is multiple workspaces. The USP is then that you can try the whole thing and know exactly what you get.

Thanks  
R

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [January 20, 2017, 10:03pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/231 "2017-01-20T22:03:47Z")

</div>

Actually some of the export file formats (thus compatibility with other CAD) are also part of the Pro version. But yes, all the modeling features are free.

---

<div class="post-metadata">

**Author:** ![Bobcat](https://avatars.discourse-cdn.com/v4/letter/b/e9bcb4/32.png) [@Bobcat](https://discourse.shapr3d.com/u/Bobcat)\
**Post date:** [January 21, 2017, 1:31am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/232 "2017-01-21T01:31:09Z")

</div>

When are we going to get the ability to bring in images/pdfs etc. as a background layer so I can draw on top of it? I cannot use this product until this is available and it’s been mentioned that it’s coming for months and months and still isn’t here

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [January 21, 2017, 7:24am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/233 "2017-01-21T07:24:53Z")

</div>

Yes, we slipped a bit with product development ☹

Roadmap for the next 6 weeks:

- improvements in constraints
- image import
- colors
- construction geometry

---

<div class="post-metadata">

**Author:** ![kd-DESIGN](https://avatars.discourse-cdn.com/v4/letter/k/ccd318/32.png) [@kd-DESIGN](https://discourse.shapr3d.com/u/kd-DESIGN)\
**Post date:** [January 23, 2017, 9:33pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/234 "2017-01-23T21:33:32Z")

</div>

I am not sure is this right place, but I must say latest version if really FAST. No crashing at all . Keep up good work. Looking forward to new features.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [January 23, 2017, 11:41pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/235 "2017-01-23T23:41:44Z")

</div>

It IS the right place. Good to hear such things. We are working on this really hard, but the problem itself is extremely complex, so sometimes things does not work out as we expect. But step by step it is getting better and better 😉

---

<div class="post-metadata">

**Author:** ![Mmcarlsson](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mmcarlsson/32/599_2.png) [@Mmcarlsson](https://discourse.shapr3d.com/u/Mmcarlsson)\
**Post date:** [February 4, 2017, 7:02am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/236 "2017-02-04T07:02:07Z")

</div>

How about viewing distance between two lines without drawing new shape. Like this, i want to get these two circles exactly with same distance from each side if you understand 🙂 ![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/3195291de836efec422108029397045058de738c.PNG)

---

<div class="post-metadata">

**Author:** ![Arshapro](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@Arshapro](https://discourse.shapr3d.com/u/Arshapro)\
**Post date:** [February 6, 2017, 7:55pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/237 "2017-02-06T19:55:29Z")

</div>

Please make a list of features you are working on and estimated timetable. I would like to know what the estimate is on changing colors of individual solids in a project. Would be enormously helpful as the models get more complex.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [February 6, 2017, 8:03pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/238 "2017-02-06T20:03:28Z")

</div>

Colors are coming in 3-4 weeks.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [February 6, 2017, 8:44pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/239 "2017-02-06T20:44:06Z")

</div>

This is exactly what constraints and dimensioning are good for 🙂

---

<div class="post-metadata">

**Author:** ![Arshapro](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@Arshapro](https://discourse.shapr3d.com/u/Arshapro)\
**Post date:** [February 7, 2017, 12:39am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/240 "2017-02-07T00:39:36Z")

</div>

I think maybe color should go in the pro version. If you could use more programmers I’ll bet a lot of people would pay for pro if you made the colors part pro only. Good luck!

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [February 7, 2017, 12:57am UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/241 "2017-02-07T00:57:18Z")

</div>

That’s the plan. We want to let people use the free version for 3d printing at home, and learning modeling (also we have a free edu version, with all the pro features), and we only want to charge our users when they use the app for work. At least that’s the idea behind our pricing tiers.

---

<div class="post-metadata">

**Author:** ![Mmcarlsson](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mmcarlsson/32/599_2.png) [@Mmcarlsson](https://discourse.shapr3d.com/u/Mmcarlsson)\
**Post date:** [February 7, 2017, 2:48pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/242 "2017-02-07T14:48:52Z")

</div>

Okey? how does it work then, dont understand 🙂

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [February 7, 2017, 3:00pm UTC](https://discourse.shapr3d.com/t/any-feature-ideas/15/243 "2017-02-07T15:00:17Z")

</div>

Select two points to set up a distance constraint between them.

[Previous page](https://discourse.shapr3d.com/t/any-feature-ideas/15.md?page=11)

[Next page](https://discourse.shapr3d.com/t/any-feature-ideas/15.md?page=13)
