# Apply logo to curved surface

**URL:** <https://discourse.shapr3d.com/t/apply-logo-to-curved-surface/36065>\
**Category:** Modeling Questions\
**Created:** [January 15, 2025, 3:58pm UTC](https://discourse.shapr3d.com/t/apply-logo-to-curved-surface/36065 "2025-01-15T15:58:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Markus1](https://avatars.discourse-cdn.com/v4/letter/m/f17d59/32.png) [@Markus1](https://discourse.shapr3d.com/u/Markus1)\
**Post date:** [January 15, 2025, 3:58pm UTC](https://discourse.shapr3d.com/t/apply-logo-to-curved-surface/36065/1 "2025-01-15T15:58:34Z")

</div>

Having no idea hoe to bring a flat pattern logo to a curved surface.  
The ˋM´ is a body and should be applied on the curved background.  
Any solutions?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/7/87c677ab8c8399d2ab016b14ef3166bd2a2a8561.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/1/112448f7bfc836494d3ef01688f7ab0cfbabad22.jpeg)

Please provide a detailed description of the issue. Provide as much information as possible, including screenshots and/or screen recordings. For screen recording, we recommend using Loom ([loom.com](http://loom.com)), an easy-to-use screen recording tool that works on Windows, iPadOS, and macOS. Loom videos can be easily embedded on the forum simply by pasting their URL. Topics without detailed information will be automatically closed. For subscription, billing, and licensing-related issues please open a support ticket using the link below. Please contribute to the community with meaningful, high-quality posts, and always use a respectful tone.

[https://support.shapr3d.com/hc/en-us/requests/new](https://support.shapr3d.com/hc/en-us/requests/new)

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [January 15, 2025, 5:27pm UTC](https://discourse.shapr3d.com/t/apply-logo-to-curved-surface/36065/2 "2025-01-15T17:27:25Z")

</div>

If you don’t mind some distortion, you can project it onto the surface and then push or pull the projection.

---

<div class="post-metadata">

**Author:** ![Markus1](https://avatars.discourse-cdn.com/v4/letter/m/f17d59/32.png) [@Markus1](https://discourse.shapr3d.com/u/Markus1)\
**Post date:** [January 15, 2025, 8:23pm UTC](https://discourse.shapr3d.com/t/apply-logo-to-curved-surface/36065/3 "2025-01-15T20:23:28Z")

</div>

Super!

Worked very well. Thanks for Instant help!