# Asymmetrical Radius

**URL:** <https://discourse.shapr3d.com/t/asymmetrical-radius/40195>\
**Category:** Modeling Questions\
**Created:** [January 24, 2026, 9:26pm UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195 "2026-01-24T21:26:23Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Horsthorst](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@Horsthorst](https://discourse.shapr3d.com/u/Horsthorst)\
**Post date:** [January 24, 2026, 9:26pm UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/1 "2026-01-24T21:26:23Z")

</div>

Hello everyone,

I hope someone can help out with some issue regarding creating identical radius.

There is an asymmetrical profile with a 45 degree cut off end. I want to round up the edges equally with a 2 mm radius. When adopting the measurement, unfortunately I’m getting different results as can be seen on the fotos added.

Any ideas how to solve this?

Thanks a lot and best greetings

Jan

 ![IMG_0399](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/4/e4ec5057fd5c98013868e7d07b5d8994713f16f2.jpeg)

 ![IMG_0402](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/b/2bba42cfcbe78425c60f8af078a9d1de9276f407.jpeg)

 ![IMG_0401](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/6/e6e7af4b8ae5e2432c1b0500e30b062eb3f318a7.jpeg)

 ![IMG_0400](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/7/1769648580aba7f756bda4a6587bdeb70389107f.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [January 25, 2026, 7:04am UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/2 "2026-01-25T07:04:30Z")

</div>

Copied profile from the first photo. Don’t see the problem.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/3/934411512487300a54128ebf7da5668e2c7b5721.jpeg)

---

<div class="post-metadata">

**Author:** ![Horsthorst](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@Horsthorst](https://discourse.shapr3d.com/u/Horsthorst)\
**Post date:** [January 25, 2026, 10:48am UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/3 "2026-01-25T10:48:57Z")

</div>

With a 90 degree ending of the profile it is no problem indeed. But in my case it’s about a 45 degree ending and in this situation I’m not receiving identically roundings as shown in the draft.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [January 25, 2026, 11:22am UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/4 "2026-01-25T11:22:25Z")

</div>

> [@Horsthorst](#):
>
> But in my case it’s about a 45 degree ending and in this situation

Then what was the purpose of posting this profile? (first photo)  
Can you attache the sketch with the profile you have problem with? Or even better the project with the problem.

---

<div class="post-metadata">

**Author:** ![Horsthorst](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@Horsthorst](https://discourse.shapr3d.com/u/Horsthorst)\
**Post date:** [January 25, 2026, 12:25pm UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/5 "2026-01-25T12:25:41Z")

</div>

The purpose was just to show the cross-section.

[shapr3d\_export\_2026-01-25\_13h22m.shapr](https://discourse.shapr3d.com/uploads/short-url/yOmJqBgmgASbp4jsFeKJYTYdriR.shapr) (3.5 MB)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [January 25, 2026, 1:03pm UTC](https://discourse.shapr3d.com/t/asymmetrical-radius/40195/6 "2026-01-25T13:03:11Z")

</div>

Now I understand the problem. Unfortunately it’s physical impossible to apply same radius on different angles and expect they look the same.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/b/0bddeced7e4c242a19cbec57f2ff34a05173ef56.png)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/6/e67ba985c3b8e8a566f40a3790193959d7d723f2.png)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/1/914514d7334186a05143cc89b53cb6e8fdf74035.png)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/d/3dcf40b903b72811509f1118fd4c8a47b4a8e65e.png)

But if you apply different radius on a different edges smooth look can be achieved:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/c/9c8f7ca95ec0c1edaaab492ce5f570664c7cee91.png)