# Automotive designs

**URL:** <https://discourse.shapr3d.com/t/automotive-designs/13841>\
**Category:** Modeling Questions\
**Created:** [July 14, 2021, 5:59am UTC](https://discourse.shapr3d.com/t/automotive-designs/13841 "2021-07-14T05:59:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![M.y](https://avatars.discourse-cdn.com/v4/letter/m/c89c15/32.png) [@M.y](https://discourse.shapr3d.com/u/M.y)\
**Post date:** [July 14, 2021, 5:59am UTC](https://discourse.shapr3d.com/t/automotive-designs/13841/1 "2021-07-14T05:59:13Z")

</div>

I am a beginner and I am trying to design front and rear bumpers and adding mounts to them and need help on how to do it

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [July 14, 2021, 4:15pm UTC](https://discourse.shapr3d.com/t/automotive-designs/13841/2 "2021-07-14T16:15:05Z")

</div>

Probably the best way to start is to draw the cross-section and then sweep it along a curve.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [July 17, 2021, 2:52pm UTC](https://discourse.shapr3d.com/t/automotive-designs/13841/3 "2021-07-17T14:52:14Z")

</div>

A sketch of you intended design would help us, and you.