# Bissell Hand Vac Holder

**URL:** <https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504>\
**Category:** Share your creations\
**Created:** [February 20, 2021, 2:15am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504 "2021-02-20T02:15:08Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 20, 2021, 2:15am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/1 "2021-02-20T02:15:08Z")

</div>

I am working on practical models for home use that can be sold for a small price and reprinted by people with printers. I am interested in starting a market place for models dedicated to home.

I imagine a day when we all have a “printer appliance" in our homes where we can printer most of our daily needs, like combs, hair clips, hangers etc.

This model is for a rather expensive hand vac we had to purchase while on the road that did not come with a holder so that can be mounted in a cabinet out of sight. Quick and simple with Shapr.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/2fdd4ffebd65a3773d1cc95486fe28dde0147fe8.jpeg)

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 20, 2021, 2:17am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/2 "2021-02-20T02:17:35Z")

</div>

Also holds the 3 accessories that came with.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 21, 2021, 3:05am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/3 "2021-02-21T03:05:01Z")

</div>

![Prusa](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/5/5a8b287d82c5152bb47901dfd549437f1714e3af.jpeg)

---

<div class="post-metadata">

**Author:** ![Steve](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/steve/32/2446_2.png) [@Steve](https://discourse.shapr3d.com/u/Steve)\
**Post date:** [February 21, 2021, 3:31pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/4 "2021-02-21T15:31:51Z")

</div>

Thanks … I guess??? I had just finally convinced myself (about a month ago) to spend a big chunk of my woodworking hobby budget on a Shapr3D license, and now you’ve made me really, really want to spend even more on a 3D printer. 😂

Mind sharing a few details on your setup. Is that a Raspberry PI I see?

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 21, 2021, 4:24pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/5 "2021-02-21T16:24:20Z")

</div>

Yes it’s a Pi b3+ running the latest Octoprint. My first print with it. Great inexpensive addon for the benefits. The Pi Cam leaves a little to be desired. Probably upgrade that soon.

I can sit inside and monitor it out in my tiny shop. I have the Spaghetti app running. If it detects a print fail it shuts down.

I added a fan and thermal switch to the extruder motor, it gets to about 170f normal operation. Now, never above 90f and it’s auto on/off.

There are a couple of laser cutter mods out there. I might try that in the future. They start at about $300 us.

I will use the Pi to monitor another thermal switch in case of runaway heat/ print fail. There is a Pi plugin for that.

I am also toying with adding/developing a fire extinguisher mod so I can print unattended and not worry about leaving the premises.

A good solid bench is a must for the printer. Building it from a kit is also a must. You gain knowledge you will need later for maintenance.

Now I just need a bigger printer! One that prints metals too! I am going to have to rob a bank soon 😒 Hobbies suck! Suck you in, that is.

One last thing. I recommend getting a router that is made with iOT in mind. I have many iOT “things”. Keep your networks separate.

---

<div class="post-metadata">

**Author:** ![Steve](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/steve/32/2446_2.png) [@Steve](https://discourse.shapr3d.com/u/Steve)\
**Post date:** [February 21, 2021, 6:42pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/6 "2021-02-21T18:42:47Z")

</div>

Thanks. Yup, the RPi’s are incredibly useful, and very inexpensive for the power you get.

Absolutely agree about building as much as possible from a kit. The knowledge gained is invaluable. I still miss Heathkit from 30 or 40 years ago. I built a TV, oscilloscope, digital multi-meter, even a computer and many other useful items.

That is actually what attracts me to 3D printing. It seems like the field is still young enough to benefit from the Maker/Hacker community. Also why I will probably go with Prusa when I finally take the plunge.

Absolutely agree about iOT security (and perhaps even performance) considerations with a router. Before I retired, one of my primary responsibilities was network security. It’s a dangerous world out there and very, very few manufacturers take that into account until after they’ve been burned.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 21, 2021, 6:48pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/7 "2021-02-21T18:48:54Z")

</div>

Heathkits, Those were the days.

---

<div class="post-metadata">

**Author:** ![Jee](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@Jee](https://discourse.shapr3d.com/u/Jee)\
**Post date:** [February 22, 2021, 12:05pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/8 "2021-02-22T12:05:19Z")

</div>

> [@Oregonerd](#):
>
> I recommend getting a router that is made with iOT in mind

Hi,  
what do you mean by that? I’m setting up my workshop with a creality and vynil cutter/plotter and have no clue about how to set up the network.  
what do you use the Rasperry Pi for?

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 22, 2021, 3:44pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/9 "2021-02-22T15:44:14Z")

</div>

I am using the Gryphon router now. It’s relatively easy to use. It allows separate networks. So far a pretty good router.

It uses a phone app for authentication of devices trying to connect to your network. I can allow or block devices.

You set 1 network for PCs tablets, phones and another for other devices. Kind of like guest network.

The Raspberry Pi allows me to run Octoprint. Octoprint is a custom Pi operating system made for 3D printer that lets me watch my print process through a camera and control my printer remotely from anywhere. Pretty neat stuff.

---

<div class="post-metadata">

**Author:** ![symonty](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/symonty/32/6270_2.png) [@symonty](https://discourse.shapr3d.com/u/symonty)\
**Post date:** [February 22, 2021, 9:26pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/10 "2021-02-22T21:26:07Z")

</div>

I use a RPI and octopi with octodash, and when I use simplify3d it auto sends the gcode to the device.

Been a great experience using Shapr3D, then send to simplify, octoprint to my cr6-se. ( and to any of my 4 3d printers and cnc machines or laser cutter ).

 ![63472117759__77B16135-B693-45BB-B474-1C834ECE64B0](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9c53020911b1e3664dfb246bd9f75b783b97dd45.jpeg)

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 22, 2021, 10:04pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/11 "2021-02-22T22:04:24Z")

</div>

Adding a custom case with touch screen in the future. Octodash looks good. Thanks for the info.

---

<div class="post-metadata">

**Author:** ![Yepher](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/yepher/32/8902_2.png) [@Yepher](https://discourse.shapr3d.com/u/Yepher)\
**Post date:** [February 26, 2021, 2:20am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/12 "2021-02-26T02:20:17Z")

</div>

I’ve been printing these lately. I am using TPU S95 for the flexible and PLA+ for the hanger and pin/

 ![SideBySide](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b79192e813e7154dcc7ff4a1c6860eaaa4acddbc.jpeg)

 ![Broom Hanger](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/4ec29cc7590f91a043a5e1c52e203f959edd166b.jpeg)

I put the Shapr3D project I drew here:

> **[yepher/3d\_print\_model\_warehouse](https://github.com/yepher/3d_print_model_warehouse/tree/master/for_home/friction_hanger)**
>
> master/for\_home/friction\_hanger

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [February 26, 2021, 4:44am UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/13 "2021-02-26T04:44:20Z")

</div>

Need to get some TPU. Expensive stuff.

---

<div class="post-metadata">

**Author:** ![Yepher](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/yepher/32/8902_2.png) [@Yepher](https://discourse.shapr3d.com/u/Yepher)\
**Post date:** [February 26, 2021, 1:55pm UTC](https://discourse.shapr3d.com/t/bissell-hand-vac-holder/11504/14 "2021-02-26T13:55:39Z")

</div>

I pay about the same as PLA/PETG. [Amazon.com : tpu filament](https://www.amazon.com/s?k=tpu+filament&crid=2JVLCRKWD5DR&sprefix=TPU%2Caps%2C193&ref=nb_sb_noss_2)

I’ve been making lots of custom phone cases with it so that has been fun too.