# Blend can not be processed

**URL:** <https://discourse.shapr3d.com/t/blend-can-not-be-processed/33932>\
**Category:** Modeling Questions\
**Created:** [September 27, 2024, 10:59pm UTC](https://discourse.shapr3d.com/t/blend-can-not-be-processed/33932 "2024-09-27T22:59:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SheeanaBrugh](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/sheeanabrugh/32/28105_2.png) [@SheeanaBrugh](https://discourse.shapr3d.com/u/SheeanaBrugh)\
**Post date:** [September 27, 2024, 10:59pm UTC](https://discourse.shapr3d.com/t/blend-can-not-be-processed/33932/1 "2024-09-27T22:59:03Z")

</div>

Greetings,

I uploaded a stp file from this web page:

> **[Lithium NG Batteries - Victron Energy](https://www.victronenergy.com/batteries/lithium-ng-batteries#enclosure-dimensions)**
>
> Building upon the success
> of our Lithium Smart Series, the NG (Next Generation) series incorporates
> significant enhancements.

OF the [https://www.victronenergy.com/upload/documents/LiFePO4-Battery-25,6V-200Ah-51,-2V-100Ah-NG-(stp).STEP](https://www.victronenergy.com/upload/documents/LiFePO4-Battery-25,6V-200Ah-51,-2V-100Ah-NG-(stp).STEP)

After importing it into Shapr3D when I try and move it I get the following error

**Blend Can Not Be Processed**

Given this information what is the best way to move the battery as a whole?

---

<div class="post-metadata">

**Author:** ![SheeanaBrugh](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/sheeanabrugh/32/28105_2.png) [@SheeanaBrugh](https://discourse.shapr3d.com/u/SheeanaBrugh)\
**Post date:** [September 27, 2024, 11:04pm UTC](https://discourse.shapr3d.com/t/blend-can-not-be-processed/33932/2 "2024-09-27T23:04:51Z")

</div>

I figured it out. It looks like it was an isolation issue.  
I isolated the battery by clicking on the root folder and choosing isolate and then was able to move it as needed.