# Bracket Feet on a Traditional China Cabinet

**URL:** <https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286>\
**Category:** Modeling Questions\
**Created:** [February 22, 2023, 12:58am UTC](https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286 "2023-02-22T00:58:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlabamaWoodworker](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/alabamawoodworker/32/13402_2.png) [@AlabamaWoodworker](https://discourse.shapr3d.com/u/AlabamaWoodworker)\
**Post date:** [February 22, 2023, 12:58am UTC](https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286/1 "2023-02-22T00:58:33Z")

</div>

I’m so close to finishing this traditional style china cabinet. The base assembly of the cabinet will have ogee bracket feet. I produced the ogee profile without any issue. How do I go about making the scroll profile? I’ve attached a few images of my model and a few images of the actual bracket feet.

 ![20230115_143018](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/b/1bd05bc1ef03e0bbaf6474da908bc2610bd3cb17.jpeg)  
 ![20230115_143230](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/a/5aa66bed221ce76cbb01e3336606c0b8c5371cf4.jpeg)  
 ![Bracket Feet 3D Model](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/9/59e05ab2ed435d418671ef2c74768fd1baf23440.jpeg)  
 ![Traditional China Cabinet 3D Model](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/3/03e356b5295413e3dbe212e8bf902cff7c79f9c8.jpeg)

---

<div class="post-metadata">

**Author:** ![AlabamaWoodworker](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/alabamawoodworker/32/13402_2.png) [@AlabamaWoodworker](https://discourse.shapr3d.com/u/AlabamaWoodworker)\
**Post date:** [February 22, 2023, 3:18am UTC](https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286/2 "2023-02-22T03:18:28Z")

</div>

Well, I think I figured it out. I sketched the scroll profile along the back section of one of the bracket feet and then removed the material. Copy the sketch, rotate, remove, and repeat.

 ![Traditional China Cabinet 3D Model](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/4/24eb5d7d0d36a2a5fc7a6f80068366ef05d53761.jpeg)

---

<div class="post-metadata">

**Author:** ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)\
**Post date:** [February 22, 2023, 6:32pm UTC](https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286/3 "2023-02-22T18:32:26Z")

</div>

That’s how I’d have done it as well. When I read your post yesterday I was unsure what part was the scroll, I thought it might be something on the door panel but didn’t know so I kept quiet.  
You did a good job of it on your own and the whole cabinet looks great 👍

---

<div class="post-metadata">

**Author:** ![AlabamaWoodworker](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/alabamawoodworker/32/13402_2.png) [@AlabamaWoodworker](https://discourse.shapr3d.com/u/AlabamaWoodworker)\
**Post date:** [February 23, 2023, 1:23am UTC](https://discourse.shapr3d.com/t/bracket-feet-on-a-traditional-china-cabinet/24286/4 "2023-02-23T01:23:54Z")

</div>

Thank you!