# Bridge Curve with Continuity?

**URL:** <https://discourse.shapr3d.com/t/bridge-curve-with-continuity/13202>\
**Category:** Modeling Questions\
**Created:** [June 8, 2021, 6:46pm UTC](https://discourse.shapr3d.com/t/bridge-curve-with-continuity/13202 "2021-06-08T18:46:02Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![milouchien](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/milouchien/32/10020_2.png) [@milouchien](https://discourse.shapr3d.com/u/milouchien)\
**Post date:** [June 8, 2021, 8:55pm UTC](https://discourse.shapr3d.com/t/bridge-curve-with-continuity/13202/2 "2021-06-08T20:55:00Z")

</div>

Hi there.  
3D splines would be great as you suggest.  
In the meantime I don’t know if you have seen there is a workaround using two sketches and subtraction.

Might be too much work if there are a lot of them needed of course.

> [@Moving spline points on Z plane?](https://discourse.shapr3d.com/t/moving-spline-points-on-z-plane/12313/15):
>
> Hi @abby.peits Here’s a vid… I have to produce a line for the centre of a non circular wreathed handrail in my work (among other things). There’s always a 3D line in there somewhere. That’s how I learned the technique. Here’s a more complex example. Hope that helps.

---

_[View the full topic](https://discourse.shapr3d.com/t/bridge-curve-with-continuity/13202)._