# CaDrawing and revision

**URL:** <https://discourse.shapr3d.com/t/cadrawing-and-revision/956>\
**Category:** Modeling Questions\
**Created:** [May 8, 2017, 12:01am UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956 "2017-05-08T00:01:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@Michael](https://discourse.shapr3d.com/u/Michael)\
**Post date:** [May 8, 2017, 12:01am UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956/1 "2017-05-08T00:01:59Z")

</div>

Can I create drawings and print? Where to add tolerance? How can I control the revisions?

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [May 8, 2017, 7:47am UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956/2 "2017-05-08T07:47:01Z")

</div>

Currently you can’t do any of these, since Shapr is pretty young, but we are developing it rapidly, so probably you will have all of these features in a few months.

---

<div class="post-metadata">

**Author:** ![Michael](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@Michael](https://discourse.shapr3d.com/u/Michael)\
**Post date:** [May 8, 2017, 1:23pm UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956/3 "2017-05-08T13:23:14Z")

</div>

Can I expect Shapr3D to do the same as OnShape? I am thinking to transfer all my design from AutoCAD/Solidworks to a cloud CAD. OnShape is much more expensive compare to Shapr3D. However, it does have all features for a daily mechanical engineer user.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [May 8, 2017, 1:40pm UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956/4 "2017-05-08T13:40:16Z")

</div>

Currently Onshape has much more features than Shapr. Especially, if you are a Solidworks user, don’t expect all the features of Solidworks from Shapr, although we are rapidly adding new features to the app. And Shapr is _not_ cloud based. It runs natively on the iPad Pro 🙂 However, by the end of the year, we will be much closer to be a full solution even for very advanced CAD users.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [May 8, 2017, 1:46pm UTC](https://discourse.shapr3d.com/t/cadrawing-and-revision/956/5 "2017-05-08T13:46:37Z")

</div>

Especially with this huge magical super secret thing: [Something BIG is coming, and we can't wait to share it with you](http://discourse.shapr3d.com/t/something-big-is-coming-and-we-cant-wait-to-share-it-with-you/928/26)  
🙂