# Can anyone help

**URL:** <https://discourse.shapr3d.com/t/can-anyone-help/31022>\
**Category:** Modeling Questions\
**Created:** [March 27, 2024, 10:09pm UTC](https://discourse.shapr3d.com/t/can-anyone-help/31022 "2024-03-27T22:09:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![HarrisonDavies](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/harrisondavies/32/24464_2.png) [@HarrisonDavies](https://discourse.shapr3d.com/u/HarrisonDavies)\
**Post date:** [March 27, 2024, 10:09pm UTC](https://discourse.shapr3d.com/t/can-anyone-help/31022/1 "2024-03-27T22:09:04Z")

</div>

HI all you wonderful genius’s,

I’m trying to recreate this brickwork, but not sure how I can gradually ease the angle as the bricks meet the edges. Any ideas?

 ![2024-03-27_22-03-59](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/8/28dbddc0a2ef18ecd08b1c904d3aa49fec5a686c.jpeg)

 ![2024-03-25_20-19-42](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/f/0/f0a9fd7820808d29972ea54e88ac4204ac2fdd50.jpeg)

Thanks in advance 🙂

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [March 27, 2024, 11:46pm UTC](https://discourse.shapr3d.com/t/can-anyone-help/31022/2 "2024-03-27T23:46:01Z")

</div>

Well, the brick are just regular bricks. The angle was done on the cuts and mortar. That said, the point of origin of the angles seem to be about mid window. Pick that point to sketch two parallel lines the width of one brick lines that represent the mortar… kinda like suns rays from that point in the middle of the window. The you can draw in the bricks between.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [March 28, 2024, 12:05am UTC](https://discourse.shapr3d.com/t/can-anyone-help/31022/3 "2024-03-28T00:05:29Z")

</div>

![Bricks](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/1/01ad1cbcbcc5c07c3602bf76983aecdbaa76ccee.jpeg)

---

<div class="post-metadata">

**Author:** ![HarrisonDavies](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/harrisondavies/32/24464_2.png) [@HarrisonDavies](https://discourse.shapr3d.com/u/HarrisonDavies)\
**Post date:** [March 28, 2024, 12:16am UTC](https://discourse.shapr3d.com/t/can-anyone-help/31022/4 "2024-03-28T00:16:12Z")

</div>

That is amazing. Thank you.