# Can someone pls help me to make a vole grid!

**URL:** <https://discourse.shapr3d.com/t/can-someone-pls-help-me-to-make-a-vole-grid/35440>\
**Category:** Modeling Questions\
**Created:** [December 3, 2024, 5:16pm UTC](https://discourse.shapr3d.com/t/can-someone-pls-help-me-to-make-a-vole-grid/35440 "2024-12-03T17:16:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dav](https://avatars.discourse-cdn.com/v4/letter/d/977dab/32.png) [@Dav](https://discourse.shapr3d.com/u/Dav)\
**Post date:** [December 3, 2024, 5:16pm UTC](https://discourse.shapr3d.com/t/can-someone-pls-help-me-to-make-a-vole-grid/35440/1 "2024-12-03T17:16:29Z")

</div>

Hallo guys i just started 2 days ago with shapr3d, i dont have any experience in programs like this, but im already loving it !  
So here is my question as you see in the pic im currently designing a raised garden bed, so im finished with the basic form now i start with the details, at the bottom there should be a vole grid like in the picture but im completely lost on how to make one of these, i dont even know if its possible tbh… thats why i wanted to try my luck here.

If you have any ideas how i could do that i would appreciate it.

Thanks in advance !

 ![20241203_181553](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/0/a025de0ebbd67b435bf9799477317587467e552b.jpeg)

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [December 3, 2024, 6:30pm UTC](https://discourse.shapr3d.com/t/can-someone-pls-help-me-to-make-a-vole-grid/35440/2 "2024-12-03T18:30:02Z")

</div>

X grid members: Make a circle the diameter of the grid wire size and then extrude it to the width of the wire mat you need for the X axis of the grid. Then use the array tool to space it out to the length of the mat’s Y axis.

Repeat for this process for the Y grid members

---

<div class="post-metadata">

**Author:** ![Mstrrlm](https://avatars.discourse-cdn.com/v4/letter/m/b5e925/32.png) [@Mstrrlm](https://discourse.shapr3d.com/u/Mstrrlm)\
**Post date:** [December 4, 2024, 4:50am UTC](https://discourse.shapr3d.com/t/can-someone-pls-help-me-to-make-a-vole-grid/35440/3 "2024-12-04T04:50:18Z")

</div>

Just make a square with rectangle tools then pattern the direction you need say right then pattern down fast and simple. You can decide in the pattern tool your specific spacing/distance