# Can't extrude a spline sketch

**URL:** <https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734>\
**Category:** Modeling Questions\
**Created:** [July 14, 2025, 3:20pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734 "2025-07-14T15:20:23Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 7:47pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/21 "2025-07-14T19:47:14Z")

</div>

> [@Xdrakosha](#):
>
> The font issue and the TC issue are different

Ok is it really different??

It’s basically this if you zoomed in alot.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 7:49pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/22 "2025-07-14T19:49:18Z")

</div>

> [@SCALEMODEL](#):
>
> Ok is it really different??

They are. TC has issue because he overlap two control points. Font has issue with wrong calculated spline. Totally different things.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 7:50pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/23 "2025-07-14T19:50:51Z")

</div>

Ok so explain why I can’t extrude the other part.

---

<div class="post-metadata">

**Author:** ![msibleyj](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/msibleyj/32/29845_2.png) [@msibleyj](https://discourse.shapr3d.com/u/msibleyj)\
**Post date:** [July 14, 2025, 7:51pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/24 "2025-07-14T19:51:02Z")

</div>

Holy cow! This is too cool! Thanks for sharing the tip. I’m not exactly sure how it works, but I figured a way. The key was when I looked down on the object from above and clicked on the bottom from that angle.

Thanks!  
Mark

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 7:54pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/25 "2025-07-14T19:54:04Z")

</div>

> [@SCALEMODEL](#):
>
> Ok so explain why I can’t extrude the other part.

Here is another problem.

If you tried to extrude this part, it would create an object with only one point of connection. That’s exactly what’s called a non-manifold object.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/7/777e620e52127ff861d6aa5d4f183fdcc4150eb4.png)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 7:55pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/26 "2025-07-14T19:55:59Z")

</div>

Ok so how would I use ur original method to fix this?

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 7:58pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/27 "2025-07-14T19:58:39Z")

</div>

It’s totally different problem. Again I describe a method of identifying a problem not fixing.  
To fix this problem you have to add a gap or make intersection of two parts.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 8:04pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/28 "2025-07-14T20:04:08Z")

</div>

So I think what your saying is you modifying geometry to make it work.

VS

Instead of fixing the parts that needs fixing?

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 8:06pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/29 "2025-07-14T20:06:29Z")

</div>

I’m saying that issue identification and fixing are two different things.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 8:15pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/30 "2025-07-14T20:15:07Z")

</div>

> [@Xdrakosha](#):
>
> Very quickly I noticed that this part is calculated wrong. This is a spline but it acts wrong. It shouldn’t be sharp in that state.

Ok I have no idea how you came to this conclusion. FYI I’m trying to use ur logic to make this make sense.

And to all your examples.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 8:18pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/31 "2025-07-14T20:18:32Z")

</div>

> [@SCALEMODEL](#):
>
> Ok I have no idea how you came to this conclusion.

Because it’s visible to the naked eye. A spline follows certain rules, and if any part breaks those rules, that part clearly has an issue.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 8:42pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/32 "2025-07-14T20:42:23Z")

</div>

> [@Xdrakosha](#):
>
> If you tried to extrude this part, it would create an object with only one point of connection. That’s exactly what’s called a non-manifold object.

So how does this look, if it followed all the rules!

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 8:44pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/33 "2025-07-14T20:44:36Z")

</div>

> [@SCALEMODEL](#):
>
> So how does this look, if it followed all the rules!

I don’t understand what do you want from me.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 9:06pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/34 "2025-07-14T21:06:00Z")

</div>

So I have questions about your original method because you are modifying original shape.

I would try to maintain the original shape as best as possible, so at the end of the day its just based on what designer wants?

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 14, 2025, 9:46pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/35 "2025-07-14T21:46:08Z")

</div>

> [@SCALEMODEL](#):
>
> original method

My original method is meant to identify the issue, not to fix it. I keep repeating that over and over. And even so, that method can’t be applied to every possible case.

To actually fix the issue, you need to take certain actions — and those actions differ depending on the situation. We have three different scenarios, and each of them requires a different solution.

> [@SCALEMODEL](#):
>
> I would try to maintain the original shape as best as possible

That only applies to situations where there’s actually an issue that can be fixed. For example, in the last case, there’s no problem with the spline at all — the issue is with the body you’re trying to create.

I can easily recreate the same situation without using splines. For example, this one won’t extrude for the same reason, even though it doesn’t use splines at all.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/f/2f04f80ceb76692a40e432ad11e7dc2a9b1bd20a.jpeg)

> [@SCALEMODEL](#):
>
> so at the end of the day its just based on what designer wants?

It’s always based on what the designer wants.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 14, 2025, 10:34pm UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/36 "2025-07-14T22:34:50Z")

</div>

> [@Xdrakosha](#):
>
> And on the second video I was looking for connection which can’t be converted to solid spline (small icon on the right tell us its already a solid spline)
> 
> ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/e/1e9b508be0e2757a620afd00a60e3074eaf5117e.png)

I was just trying to get clarification on this solution. So I though I suggest “mark felt” font as an example.

Does what you suggest apply to that Mark font? If not not?

Or are you saying each problem have different, each its own tailored individual solution?

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 15, 2025, 3:32am UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/37 "2025-07-15T03:32:00Z")

</div>

> [@SCALEMODEL](#):
>
> Does what you suggest apply to that Mark font?

The method of identification can be applied, but the solution should be chosen based on the specific situation.

> [@SCALEMODEL](#):
>
> each problem have different, each its own tailored individual solution?

Of course. How could it be any other way? If one solution worked for every problem, then let’s use my method to solve world hunger — starting with the children in Africa.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 15, 2025, 4:41am UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/38 "2025-07-15T04:41:24Z")

</div>

Ok I will try again, trying to figure out what you did.

Here is what I see and correct me if what I saw is incorrect.

1. You select sketch to see the area is highlighted because there is a brake in spline curvature.
2. After the clean up you get 1 solid yellow
3. You proceed to the disconnect area because you see the break
4. Right after you go straight to the problem area because you see that break because you see the doted circle. You chose to delete, but before that you choose to move it to confirm. Did you do that because you were at a certain zoom level to see that it is a problem?

Finally Extrudes.

My Mark Felt example I took your idea applied it so I selected that dot (also in general I know ahead of time where the problem is). Deleted that dot and I was able to extrude. In Mark font we are looking for the KINK not broken sketch. My confusion, I followed your example above deleted the dotted sketch, it worked but you select another area to fix.

I suggested another example sketch that can’t be extruded, which is how the KINK is formed for most or if not all of the sketch extrusion problem, I just made it bigger so it can be seen. But that has no sharp corners, or break or that dotted control point so I wondered how to fix that.

It is basically the original problem but blown up to see what the problem is, you can convert the corners to curve but that will just make it round change to the shape and still it will not extrude, so in his cause would you delete the problem control point because there is a certain CUE you see with the control points like the dotted circle or is it big enough to see the problem so just delete the control points?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/9/a9235833dbe38e5ac6355131e494b1f5b7ac50b7.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 15, 2025, 4:55am UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/39 "2025-07-15T04:55:35Z")

</div>

I’m tired of explaining the same things over and over again.

Maybe it’s my English level that doesn’t let me explain things clearly enough, or maybe it’s something else…

I’ve already written about each of the problems shown separately and answered all the questions that were asked.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [July 15, 2025, 5:09am UTC](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734/40 "2025-07-15T05:09:06Z")

</div>

Most likely my issue. Not understanding how to identify the problem area. But someone else will utilize it and show the example.

U know the same question will come up again by someone else guaranteed! 😃

[Previous page](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734.md?page=1)

[Next page](https://discourse.shapr3d.com/t/cant-extrude-a-spline-sketch/38734.md?page=3)
