# Can't get my model right. Too confusing. please help

**URL:** <https://discourse.shapr3d.com/t/cant-get-my-model-right-too-confusing-please-help/26505>\
**Category:** Modeling Questions\
**Created:** [June 28, 2023, 4:16pm UTC](https://discourse.shapr3d.com/t/cant-get-my-model-right-too-confusing-please-help/26505 "2023-06-28T16:16:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![IlanG](https://avatars.discourse-cdn.com/v4/letter/i/e9a140/32.png) [@IlanG](https://discourse.shapr3d.com/u/IlanG)\
**Post date:** [June 28, 2023, 4:16pm UTC](https://discourse.shapr3d.com/t/cant-get-my-model-right-too-confusing-please-help/26505/1 "2023-06-28T16:16:34Z")

</div>

Hello. I am new to Shapr3d and I’ve spent so much time on this model from direct measurements but every time I think I am drawing something on an edge or something and I zoom out and I see that it is on a totally different place of the model. It’s crazy confusing. and I just thought after hours of designing this that it was perfect, and I zoomed out and the angles are not symmetrical and I just can’t figure this out. please take a look at the back (the angle) I can’t fix that, the two sides are supposed to be symmetrical and they are not. and I can’t fix it on the back. What really confuses me is all the different sketch panes on the side. Thank you!

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/5/55ba82137a83fc2dfd1b1ec1119a097f1775abd0.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/1/e190d0471ce7909cc51a72d3a517305213951999.png)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/6/463cab8dd01b5a8cc6eb0eeefef51ecc8a8063d4.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/4/c4a7b513579e6a5975394ed4e3eb16cccfdd24ba.jpeg)  
[[Transfer - Dropbox](https://www.dropbox.com/t/sSxkDkouKjkQ0bn3)]([https://Screen](https://Screen) recording here - Dropbox)