# Cardboard and PETG Stool

**URL:** <https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795>\
**Category:** Share your creations\
**Created:** [June 10, 2022, 8:40pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795 "2022-06-10T20:40:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Clem.graphics](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/clem.graphics/32/15514_2.png) [@Clem.graphics](https://discourse.shapr3d.com/u/Clem.graphics)\
**Post date:** [June 10, 2022, 8:40pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/1 "2022-06-10T20:40:59Z")

</div>

Hi Shapr3D community,  
I’m using shapr3D since 1 month as a test to design on the go with the iPad. the idea to have the same both on Mac or mobile is really interesting.  
I am really impressed by the results. Once I understood the principle of the app… it’s really fun to do projects with it.

i made this project with Shapr3D to have a good preview of the final rendering, before launching a real prototype. It was really fun to do with this app. I started with the iPad and finished the project on the Mac.

Here is the first prototype made from 16mm honeycomb board and 12mm PETG. cut with a Zund G3 and a lot of v-Cut!

 ![IMG_5100](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/7/7bf9f7ada9cbfd1e3a2aa55fbc77ff0b45cd4ac0.jpeg)  
For informartion, I used Illustrator at the end to prepare the file for the plotter… because I have a special workflow. Shapr3D doesn’t have layer to separate the different cut line.

thank you for watching !  
CLÉM!

---

<div class="post-metadata">

**Author:** ![Clem.graphics](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/clem.graphics/32/15514_2.png) [@Clem.graphics](https://discourse.shapr3d.com/u/Clem.graphics)\
**Post date:** [June 10, 2022, 8:44pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/2 "2022-06-10T20:44:47Z")

</div>

picture from Shapr3D

 ![Schermafbeelding 2022-06-10 om 22.36.07](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/0911fd3371883bf52f7d1feeb6ef4223f08da25f.jpeg)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [June 10, 2022, 10:48pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/3 "2022-06-10T22:48:27Z")

</div>

This is great, thanks for sharing!

---

<div class="post-metadata">

**Author:** ![Clem.graphics](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/clem.graphics/32/15514_2.png) [@Clem.graphics](https://discourse.shapr3d.com/u/Clem.graphics)\
**Post date:** [June 11, 2022, 7:48pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/4 "2022-06-11T19:48:34Z")

</div>

Hey istvan. thank you for your comments !  
Did you plan to add cardboard on the texture list ? or a way to create our own texture ?

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [June 11, 2022, 7:51pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/5 "2022-06-11T19:51:03Z")

</div>

We keep adding more and more materials, and if we see significant demand for a cardboard material then we’ll add it at some point of time. In the future we might even add support for custom materials.

---

<div class="post-metadata">

**Author:** ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)\
**Post date:** [June 27, 2022, 1:34pm UTC](https://discourse.shapr3d.com/t/cardboard-and-petg-stool/19795/6 "2022-06-27T13:34:54Z")

</div>

Very nice work Clem.