# Chamfer angle

**URL:** <https://discourse.shapr3d.com/t/chamfer-angle/33470>\
**Category:** Modeling Questions\
**Created:** [August 29, 2024, 1:19am UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470 "2024-08-29T01:19:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pHp](https://avatars.discourse-cdn.com/v4/letter/p/3e96dc/32.png) [@pHp](https://discourse.shapr3d.com/u/pHp)\
**Post date:** [August 29, 2024, 1:20am UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470/1 "2024-08-29T01:20:00Z")

</div>

is there a way to adjust the angle in which and chamfer removes material? I am trying to duplicate a microphone stand. It has a long but shallow chamfer in it. My fillet tool pops up the second adjustment option for modifying it further. But my chamfer does not

---

<div class="post-metadata">

**Author:** ![Bob3DPO](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)\
**Post date:** [August 29, 2024, 1:40am UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470/2 "2024-08-29T01:40:13Z")

</div>

Yes. You can set the length of chamfer for each side, not the angle directly.

 ![IMG_0061](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/0/307052fefdaf58cd0a2ee6b7fc266d29390819f3.jpeg)

 ![IMG_0062](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/9/894c1cd30e36dd259af78be7ba3a1bc387846d4a.jpeg)

---

<div class="post-metadata">

**Author:** ![pHp](https://avatars.discourse-cdn.com/v4/letter/p/3e96dc/32.png) [@pHp](https://discourse.shapr3d.com/u/pHp)\
**Post date:** [August 29, 2024, 3:11pm UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470/3 "2024-08-29T15:11:13Z")

</div>

Hey really appreciate the reply. Thanks for guiding me toward the two distance chamfer.

Is there another way to do it. The 2 distance chamfer got me closer but no cigar.

Here is what I am modeling for practice, and what I’m running into in shapr

 ![IMG_4508](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/e/ae0b6ddc00ee559e96c4e8d3abb69ac7e9c6d3b4.jpeg)  
 ![IMG_4511](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/8/08764e82c1bd44500ed8edefb17f5ae53179b78b.jpeg)  
 ![IMG_4512](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/6/a685b88e244cccd5ba92133a9267835c97c797ff.jpeg)  
 ![IMG_4513](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/5/65c3ef0ef023c7285136ba7a14efb05bdda7f034.jpeg)  
 ![IMG_4515](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/4/942d442f26c9b834b87c088cfae531d093328a16.jpeg)

The angle on the stand starts at a 4mm height from bottom. That is a separate section in my build currently hidden. So my remaining distance is 11 mm. The rest of the model is a 16mm chamfer but the back has the steeper sweep where the microphone mounts into the stand.

Do you have any ideas on how to model that back chamfer? If I bring it in past 16mm it starts removing material

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [August 29, 2024, 3:13pm UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470/4 "2024-08-29T15:13:52Z")

</div>

Loft is the better way to go here IMO.

---

<div class="post-metadata">

**Author:** ![pHp](https://avatars.discourse-cdn.com/v4/letter/p/3e96dc/32.png) [@pHp](https://discourse.shapr3d.com/u/pHp)\
**Post date:** [August 29, 2024, 4:24pm UTC](https://discourse.shapr3d.com/t/chamfer-angle/33470/5 "2024-08-29T16:24:03Z")

</div>

Thank you so much. Had to set it up different but this is a much better result!

 ![IMG_4517](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/3/13c8e52953d71e786af7c861f754d8b605e5d709.jpeg)