# Chamfer Double Taper?

**URL:** <https://discourse.shapr3d.com/t/chamfer-double-taper/13956>\
**Category:** Modeling Questions\
**Created:** [July 20, 2021, 6:15pm UTC](https://discourse.shapr3d.com/t/chamfer-double-taper/13956 "2021-07-20T18:15:58Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [July 22, 2021, 4:16pm UTC](https://discourse.shapr3d.com/t/chamfer-double-taper/13956/11 "2021-07-22T16:16:45Z")

</div>

I think you can obtain a measured chamfer by following @KPeter method on your other post.

> [@Weird Behavior with Tapered Chamfer](https://discourse.shapr3d.com/t/weird-behavior-with-tapered-chamfer/13964):
>
> So……I tried performing a tapered chamfer, as I have seen in other posts/tutorials on line. But something weird is happening. Where I am trying to taper it to zero — which it “seems” should be basically the original shape it started (aka with no chamfer); well it contorts part of the shape. You can see it in the pictures below.

---

_[View the full topic](https://discourse.shapr3d.com/t/chamfer-double-taper/13956)._