# Chamfer/Fillet - Variable

**URL:** <https://discourse.shapr3d.com/t/chamfer-fillet-variable/40432>\
**Category:** Feature requests\
**Created:** [March 3, 2026, 4:11am UTC](https://discourse.shapr3d.com/t/chamfer-fillet-variable/40432 "2026-03-03T04:11:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![spencersmitty](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/spencersmitty/32/35302_2.png) [@spencersmitty](https://discourse.shapr3d.com/u/spencersmitty)\
**Post date:** [March 3, 2026, 4:11am UTC](https://discourse.shapr3d.com/t/chamfer-fillet-variable/40432/1 "2026-03-03T04:11:17Z")

</div>

![Screenshot 2026-03-02 at 20.03.44](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/6/2677f413fcb4d1fd9e4ffde0e86ca89ebd52baf1.jpeg)

the work around i made in this picture was to sweep across the edge from a side sketch, scale one end down, then subtract the new swept body from the main body.

this could be added as a subtool in the Chamfer/Fillet called “Variable” or something. you would select your edges, and on each end there would be a drag arrow/scale grabber to adjust the effect - thus giving you the same effect.

---

<div class="post-metadata">

**Author:** ![spencersmitty](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/spencersmitty/32/35302_2.png) [@spencersmitty](https://discourse.shapr3d.com/u/spencersmitty)\
**Post date:** [March 29, 2026, 8:08pm UTC](https://discourse.shapr3d.com/t/chamfer-fillet-variable/40432/3 "2026-03-29T20:08:09Z")

</div>

created a ticket for this lacking feature