# Chamfer problems

**URL:** <https://discourse.shapr3d.com/t/chamfer-problems/22243>\
**Category:** Modeling Questions\
**Created:** [November 1, 2022, 10:20am UTC](https://discourse.shapr3d.com/t/chamfer-problems/22243 "2022-11-01T10:20:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eddy](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@Eddy](https://discourse.shapr3d.com/u/Eddy)\
**Post date:** [November 1, 2022, 10:20am UTC](https://discourse.shapr3d.com/t/chamfer-problems/22243/1 "2022-11-01T10:20:25Z")

</div>

[foot.shapr](https://discourse.shapr3d.com/uploads/short-url/z2MNYxTJSvdeXzDhcApnwEtrgi8.shapr) (29.9 KB)  
I am fighting with chamfer, why can I not chamfer the long corners on the bottom ?  
When I try to do so it shows the line where it chamfers but doesn’t do it

Eddy

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [November 1, 2022, 11:33am UTC](https://discourse.shapr3d.com/t/chamfer-problems/22243/2 "2022-11-01T11:33:02Z")

</div>

In the attached file, you have duplicated bodies…

---

<div class="post-metadata">

**Author:** ![Eddy](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@Eddy](https://discourse.shapr3d.com/u/Eddy)\
**Post date:** [November 1, 2022, 12:52pm UTC](https://discourse.shapr3d.com/t/chamfer-problems/22243/3 "2022-11-01T12:52:17Z")

</div>

Thanks

How stupid can one be

Eddy