# Chamfering edges

**URL:** <https://discourse.shapr3d.com/t/chamfering-edges/48>\
**Category:** Modeling Questions\
**Created:** [February 2, 2016, 10:26am UTC](https://discourse.shapr3d.com/t/chamfering-edges/48 "2016-02-02T10:26:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![awoodhead](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/awoodhead/32/451_2.png) [@awoodhead](https://discourse.shapr3d.com/u/awoodhead)\
**Post date:** [February 2, 2016, 10:26am UTC](https://discourse.shapr3d.com/t/chamfering-edges/48/1 "2016-02-02T10:26:33Z")

</div>

I would like to be able to chamfer an edge at less than 0.1 on any object. On larger objects this is no problem - see pic below - object on the left. I drag out a chamfer - initially goes to 0.1 and then I type in 0.05 and it works just fine. However, can’t drag out a chamfer on the object on the right. I think this is because it is too thin - although it would be big enough to take a chamfer of 0.05. One option would be that when you try to pull out a chamfer on an object that is too thin, the little keypad appears that lets you type in a value - not sure how easy this would be!

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/e86ed4fcd7c8a1dff8983aa900becbdd82534534.png)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [February 2, 2016, 10:34am UTC](https://discourse.shapr3d.com/t/chamfering-edges/48/2 "2016-02-02T10:34:54Z")

</div>

Hmm, that’s a bug, we will fix it. The label should appear anyway. Thanks for reporting.