# Change the angle of een extruded body

**URL:** <https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409>\
**Category:** Modeling Questions\
**Created:** [November 9, 2022, 10:50am UTC](https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409 "2022-11-09T10:50:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RobinBouten](https://avatars.discourse-cdn.com/v4/letter/r/e495f1/32.png) [@RobinBouten](https://discourse.shapr3d.com/u/RobinBouten)\
**Post date:** [November 9, 2022, 10:50am UTC](https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409/1 "2022-11-09T10:50:59Z")

</div>

Hi,

I have created a body with an angle during extruding de body. Is there a way to change the angle after extruding the body?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/9/891839621a6a480eb2d21bc3f6d02501792ca395.jpeg)

Thanks!!

---

<div class="post-metadata">

**Author:** ![Matt\_the-Rathje](https://avatars.discourse-cdn.com/v4/letter/m/49beb7/32.png) [@Matt\_the-Rathje](https://discourse.shapr3d.com/u/Matt_the-Rathje)\
**Post date:** [November 9, 2022, 11:39am UTC](https://discourse.shapr3d.com/t/change-the-angle-of-een-extruded-body/22409/2 "2022-11-09T11:39:26Z")

</div>

Hi Robin,  
Select the face you wnat to tilt, then the edge of the face that shall remain at the same place, then drag the arrow to the side you want to tilt to.

 ![2022-11-09 12_36_28-Shapr3D](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/0/2001c8a4f43d3889c8999c15efce40f08ee58178.jpeg)  
HTH  
Cheers Matt