# Changing the degree of a body after extrusion

**URL:** <https://discourse.shapr3d.com/t/changing-the-degree-of-a-body-after-extrusion/39876>\
**Category:** Modeling Questions\
**Created:** [November 30, 2025, 9:42pm UTC](https://discourse.shapr3d.com/t/changing-the-degree-of-a-body-after-extrusion/39876 "2025-11-30T21:42:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JBy09](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@JBy09](https://discourse.shapr3d.com/u/JBy09)\
**Post date:** [November 30, 2025, 9:42pm UTC](https://discourse.shapr3d.com/t/changing-the-degree-of-a-body-after-extrusion/39876/1 "2025-11-30T21:42:12Z")

</div>

Hello,

Thanks in advance for your help. I sketched these legs, extruded them into bodies, and then afterwords realized the legs extended beyond the face of the drawer (see picture). I would like to them to be flush with the drawer (vertical line) but want to leave the rest of the legs the same. In other words, I want to change the length and angles of the front leg without affecting the rail and back leg. I’m new to Shapr3d and I don’t want to redraw these legs and start over.

 ![Screenshot 2025-11-30 at 3.33.58 PM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/5/95be11470aacd88c6c91d487fe78ea44eab3155b.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [November 30, 2025, 10:19pm UTC](https://discourse.shapr3d.com/t/changing-the-degree-of-a-body-after-extrusion/39876/2 "2025-11-30T22:19:14Z")

</div>

Go back to the sketch and simply move what you need to the new location. It’s hard to be more specific because I don’t know exactly how you created the shape.