# Connected point

**URL:** <https://discourse.shapr3d.com/t/connected-point/11734>\
**Category:** Modeling Questions\
**Created:** [March 8, 2021, 1:12pm UTC](https://discourse.shapr3d.com/t/connected-point/11734 "2021-03-08T13:12:09Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [March 8, 2021, 1:12pm UTC](https://discourse.shapr3d.com/t/connected-point/11734/1 "2021-03-08T13:12:09Z")

</div>

Can we recreate this point on other intersections?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/1/1c9e5a9dcdaa9d91579aee7c47f4f391a3a2d09c.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/e/e35223a87e63e3ac03ecc39e5f95454408ca34a8.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c11b07751795eccbad9ae42304fb9dbb81a3f8f6.jpeg)

And once you disconnect it, you gotta draw a new line to reconnect again.

Is there a better way ?

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [March 8, 2021, 5:14pm UTC](https://discourse.shapr3d.com/t/connected-point/11734/2 "2021-03-08T17:14:20Z")

</div>

What are your snap settings? Should be able to snap to a point… (not sure I understand the problem or what you are trying to accomplish. First coffee of the day so…)

Be nice if Shapr had some highlight tools!

---

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [March 8, 2021, 8:05pm UTC](https://discourse.shapr3d.com/t/connected-point/11734/3 "2021-03-08T20:05:09Z")

</div>

@Oregonerd I’m new to IOS in general 🙂  
So what’s that supposed to be?

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [March 9, 2021, 12:28am UTC](https://discourse.shapr3d.com/t/connected-point/11734/4 "2021-03-09T00:28:51Z")

</div>

In Shapr, the “magnet” bottom right.

---

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [March 9, 2021, 1:50am UTC](https://discourse.shapr3d.com/t/connected-point/11734/5 "2021-03-09T01:50:28Z")

</div>

@Oregonerd  
This you mean ?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c7917234e6733ad55245165296a24f5dbd3a2b40.jpeg)

---

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [March 9, 2021, 1:52am UTC](https://discourse.shapr3d.com/t/connected-point/11734/6 "2021-03-09T01:52:40Z")

</div>

I worked my way out by creating 3 sequential lines and stabilized the angle between at 180

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [March 9, 2021, 5:23am UTC](https://discourse.shapr3d.com/t/connected-point/11734/7 "2021-03-09T05:23:32Z")

</div>

II didn’t see the big picture. 🙃