# Constraints **URL:** \ **Category:** Modeling Questions\ **Created:** [August 30, 2018, 7:10pm UTC](https://discourse.shapr3d.com/t/constraints/2838 "2018-08-30T19:10:26Z")\ **Posts on this page:** 11\ **Page:** 1

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [August 30, 2018, 7:10pm UTC](https://discourse.shapr3d.com/t/constraints/2838/1 "2018-08-30T19:10:26Z")

![BAB48E0D-9187-4D30-AAF8-195B20D7A629](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/4/44784db50e58b4c6691d0bc743a432594425b156.jpeg) This purple line has appeared… When moving the centre of the circle it snaps automatically to the lines and not to a grid point in between ? Secondly using the offset tool only shows the value in the corner box and doesn’t show you physically moving the sketched line but the value changes when the pen moves but the sketch doesn’t ? Thanks Carl ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [August 30, 2018, 7:20pm UTC](https://discourse.shapr3d.com/t/constraints/2838/2 "2018-08-30T19:20:40Z")

Should I be only working in beta ? What’s everyone else doing ?🤔 Thanks Carl ---

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\ **Post date:** [August 30, 2018, 7:48pm UTC](https://discourse.shapr3d.com/t/constraints/2838/3 "2018-08-30T19:48:55Z")

If the snap points are closer than the size of the tip of the Pencil, it’s hard to find the grid point. In this case it makes sense to zoom in a bit. This is not something that changed with the latest release, but it worked like this before. ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [August 30, 2018, 8:00pm UTC](https://discourse.shapr3d.com/t/constraints/2838/4 "2018-08-30T20:00:39Z")

Should I be only in beta now ? ---

**Author:** ![Zoli](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/zoli/32/592_2.png) [@Zoli](https://discourse.shapr3d.com/u/Zoli)\ **Post date:** [August 30, 2018, 8:16pm UTC](https://discourse.shapr3d.com/t/constraints/2838/5 "2018-08-30T20:16:29Z")

Also, you can disable “Guides on selection” in the snapping menu in the bottom right corner. We have not released a new public beta. Use the App Store version. ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [August 30, 2018, 8:29pm UTC](https://discourse.shapr3d.com/t/constraints/2838/6 "2018-08-30T20:29:11Z")

Ok will do … Thanks for the help 👍🏻 Carl ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [September 4, 2018, 6:59pm UTC](https://discourse.shapr3d.com/t/constraints/2838/7 "2018-09-04T18:59:00Z")

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/2/27235000022b0631660bbc36b3e334b5126f6dfe.jpeg) Hi Zoli Can you help please I need to finish this work and now cannot duplicate copy or move these crates to Can I send the file I’m working on please ? I’m not a tech’y Guy and trying to find my feet 👍🏻 I make many mistakes and think it’s because I cut corners ? Cheers Carl ---

**Author:** ![Zoli](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/zoli/32/592_2.png) [@Zoli](https://discourse.shapr3d.com/u/Zoli)\ **Post date:** [September 5, 2018, 6:46am UTC](https://discourse.shapr3d.com/t/constraints/2838/8 "2018-09-05T06:46:48Z")

Hi Carl, Please export it in .shapr format and send it to [zoli@shapr3d.com](mailto:zoli@shapr3d.com) and we take a look at it. Thanks zoli ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [September 5, 2018, 4:29pm UTC](https://discourse.shapr3d.com/t/constraints/2838/9 "2018-09-05T16:29:05Z")

> ![](https://sea2.discourse-cdn.com/flex020/user_avatar/discourse.shapr3d.com/zoli_shapr3d/45/592_1.png "Zoli\_Shapr3D") > > [Zoli\_Shapr3D](https://discourse.shapr3d.com/u/zoli_shapr3d) > > ``` > September 5 > > ``` > > Hi Carl, > Please export it in .shapr format and send it to [zoli@shapr3d.com](mailto:zoli@shapr3d.com) and we take a look at it. > Thanks > > zoli > * * * > > [Visit Topic](https://discourse.shapr3d.com/t/constraints/2838/8) or reply to this email to respond. > * * * > > #### In Reply To > > ![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9da16b66bf14187160284977379799a6a1f5783a.png "Carl") > > [Carl](https://discourse.shapr3d.com/u/carl) > > ``` > September 4 > > ``` > > [[image]](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/27235000022b0631660bbc36b3e334b5126f6dfe.jpeg) > > Hi Zoli Can you help please I need to finish this work and now cannot duplicate copy or move these crates to Can I send the file I’m working on please ? I’m not a tech’y Guy and trying to find my feet 👍🏻 I make many mistakes and think it’s because I cut corners ? Cheers Carl > * * * > > [Visit Topic](https://discourse.shapr3d.com/t/constraints/2838/8) or reply to this email to respond. > To unsubscribe from these emails, [click here](https://discourse.shapr3d.com/email/unsubscribe/fb90680ed39c5b8a3075fa399dc9616b27a76e1ac5f3236bae57e1f42c7d7bc3). ---

**Author:** ![Carl](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/carl/32/2278_2.png) [@Carl](https://discourse.shapr3d.com/u/Carl)\ **Post date:** [September 5, 2018, 4:30pm UTC](https://discourse.shapr3d.com/t/constraints/2838/10 "2018-09-05T16:30:07Z")

Hi Zoli It says the file sizes exceeds and won’t allow me to attach ? Carl ---

**Author:** ![Zoli](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/zoli/32/592_2.png) [@Zoli](https://discourse.shapr3d.com/u/Zoli)\ **Post date:** [September 5, 2018, 8:09pm UTC](https://discourse.shapr3d.com/t/constraints/2838/11 "2018-09-05T20:09:47Z")

Hi Carl, Can you try upload it to the cloud (Dropbox or Google drive) and share only the link with me privately? zoli