# Constructionsplane

**URL:** <https://discourse.shapr3d.com/t/constructionsplane/17160>\
**Category:** Modeling Questions\
**Created:** [February 1, 2022, 9:00am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160 "2022-02-01T09:00:02Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 1, 2022, 9:00am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/1 "2022-02-01T09:00:02Z")

</div>

![L2 version 3](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/e/e70e9a1158699efd7184a742ce4d8b68d8b737dd.jpeg)  
I have added a construction plane. I made som sketches which I need to slide and copy, with specifik measurement, on the construction plan but an copy moves strictly in the x, y or z-direction. What I am doing wrong?

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 9:16am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/2 "2022-02-01T09:16:45Z")

</div>

Hej Daniel,

markera hela skissen sen välj move/rotate, sen om du trycker på en av pilarna så får du möjlighet att skriva in ett värde.

//R

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 1, 2022, 10:01am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/4 "2022-02-01T10:01:27Z")

</div>

Hej - det fungerar med EN linje men inte när jag väljer en grupp. Försöker ladda upp en png.fil för att visa på avvikelser.

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 10:06am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/5 "2022-02-01T10:06:26Z")

</div>

Men om du väljer move/rotate verktyget först och sen markerar sketchen i item menyn, prova det.  
glöm inte att kryssa i copy knappen

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 1, 2022, 10:07am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/6 "2022-02-01T10:07:26Z")

</div>

Japp och då kan jag copy eller flytta men jag får inte med den exakta flytten i mm

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 10:09am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/7 "2022-02-01T10:09:22Z")

</div>

har du tryckt på en av pilarna, då kommer det upp en ruta där du skriver de önskade siffrorna

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 1, 2022, 10:13am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/8 "2022-02-01T10:13:48Z")

</div>

Nej det gör det inte när jag markerar en sketch partiellt. Markerar jag HELA sketchen så kommer mått mm upp

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 10:29am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/9 "2022-02-01T10:29:03Z")

</div>

kan ju vara att några punkter eller linjer är låsta, men det borde ju inte påverka när man ska göra en copy…

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 10:32am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/10 "2022-02-01T10:32:50Z")

</div>

Testa att markera de linjerna som du vill kopiera, tryck på close för att stänga sketch läget, och sen på move/rotate

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 1, 2022, 11:41am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/11 "2022-02-01T11:41:22Z")

</div>

Trycker jag skift och klickar på alla linjer som jag vill kopiera så fungerar det med nu är det en sjukmassa smålinjer och att klicka med skift tar evigheter.

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 1, 2022, 11:43am UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/12 "2022-02-01T11:43:05Z")

</div>

om man dubbelklickar på en linje så markerar man alla som är kopplade till den linjen

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 2, 2022, 6:02pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/13 "2022-02-02T18:02:25Z")

</div>

Hej

tyvärr det fungerar inte. Se två bifogade bilder.

 ![Skärmavbild 2022-02-02 kl. 19.00.14](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/1/1ccc85824161082589ec5d5633a03042ca2d72fe.png)  
Uploading: Skärmavbild 2022-02-02 kl. 19.00.28.png…

---

<div class="post-metadata">

**Author:** ![danielsthlm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielsthlm/32/10757_2.png) [@danielsthlm](https://discourse.shapr3d.com/u/danielsthlm)\
**Post date:** [February 2, 2022, 6:04pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/14 "2022-02-02T18:04:02Z")

</div>

![Skärmavbild 2022-02-02 kl. 19.00.28](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/3ccaf221b5711902b1569eec2a2b69ba4a7ed449.png)

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [February 2, 2022, 6:08pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/15 "2022-02-02T18:08:40Z")

</div>

I don’t understand the language. Does this help?

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/2e4ad385d71a26ab456367bc029ad9c28ded1e0e.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/2e4ad385d71a26ab456367bc029ad9c28ded1e0e.mov)

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 2, 2022, 7:57pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/16 "2022-02-02T19:57:05Z")

</div>

är det att du vill flytta/kopiera parallellt med det planet som du har ritat det på?

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [February 2, 2022, 8:04pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/17 "2022-02-02T20:04:14Z")

</div>

I think he wants to copy / move his sketch parallel to the angled plane

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [February 2, 2022, 8:16pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/18 "2022-02-02T20:16:05Z")

</div>

Got it. Thanks Robert.

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c60cd4ebb152a1da7f0b512297ede5e929cbf020.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c60cd4ebb152a1da7f0b512297ede5e929cbf020.mov)

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [February 2, 2022, 8:16pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/19 "2022-02-02T20:16:50Z")

</div>

Grab the center dot of the widget and move it around on the construction plane, it will orient the movement axis to it.

Edit: @TigerMike did just that as I typed this, ha.

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [February 2, 2022, 8:31pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/20 "2022-02-02T20:31:40Z")

</div>

Nice to know we’re on the same page. I guess timing is everything. 🙂

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [February 2, 2022, 9:56pm UTC](https://discourse.shapr3d.com/t/constructionsplane/17160/21 "2022-02-02T21:56:59Z")

</div>

You mean the same _plane_. 👍

[Next page](https://discourse.shapr3d.com/t/constructionsplane/17160.md?page=2)