# Creating Da Vinci bridge

**URL:** <https://discourse.shapr3d.com/t/creating-da-vinci-bridge/23823>\
**Category:** Share your creations\
**Created:** [January 29, 2023, 2:11am UTC](https://discourse.shapr3d.com/t/creating-da-vinci-bridge/23823 "2023-01-29T02:11:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![freedimenion](https://avatars.discourse-cdn.com/v4/letter/f/ea666f/32.png) [@freedimenion](https://discourse.shapr3d.com/u/freedimenion)\
**Post date:** [January 29, 2023, 2:11am UTC](https://discourse.shapr3d.com/t/creating-da-vinci-bridge/23823/1 "2023-01-29T02:11:14Z")

</div>

This is a da Vinci bridge which does not require any screws in its construction. I used some cylinders and sticks to joint this bridge. However, the “mating” function can only mate one face of a part to another face of another part. So, I found difficulty when mating the stick accurately with the cylinder. Because there are three faces in the stick going to mate with three cylinders surface.

[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/3/838a72553d720629006d281f74b7719c8165de18.jpeg "Da Vinci bridge") ](https://www.youtube.com/watch?v=NMcS9mx4YWo)