# Creating organic shape using loft and guide curve

**URL:** <https://discourse.shapr3d.com/t/creating-organic-shape-using-loft-and-guide-curve/21531>\
**Category:** Modeling Questions\
**Created:** [September 22, 2022, 3:05pm UTC](https://discourse.shapr3d.com/t/creating-organic-shape-using-loft-and-guide-curve/21531 "2022-09-22T15:05:14Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [September 28, 2022, 3:07pm UTC](https://discourse.shapr3d.com/t/creating-organic-shape-using-loft-and-guide-curve/21531/4 "2022-09-28T15:07:19Z")

</div>

Thanks for the screenshot! There is [another thread](https://discourse.shapr3d.com/t/sweep-errors/21626/2) with the same content, even dough it was started with the sweep tool 😃

When using the guided loft, please make sure to have a closed cross-section at the start and end points of the guide curves. In the other thread, I shared a video that I think could also be helpful for you too.

---

_[View the full topic](https://discourse.shapr3d.com/t/creating-organic-shape-using-loft-and-guide-curve/21531)._