# Curved slope modeling

**URL:** <https://discourse.shapr3d.com/t/curved-slope-modeling/16083>\
**Category:** Modeling Questions\
**Created:** [November 28, 2021, 2:21am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083 "2021-11-28T02:21:50Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Keinobi](https://avatars.discourse-cdn.com/v4/letter/k/aeb1de/32.png) [@Keinobi](https://discourse.shapr3d.com/u/Keinobi)\
**Post date:** [November 28, 2021, 2:21am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083/1 "2021-11-28T02:21:50Z")

</div>

Hi, I modeled a straight slope shape.  
And I need another one that curved 90 degree of my first shape.  
I’ll put my shape into this draft, so please tell me how to do…

By few touch to complete is very happy to me, but I have preparation to make the model

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/0f3939b903878cf92fa50929edbfb6cf6fb25adc.jpeg)  
from the beginning.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 28, 2021, 6:19am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083/2 "2021-11-28T06:19:03Z")

</div>

Revolve a rectangle 90 deg. Use the same triangle to extrude cut the bottom flat. Draw a circle to extrude cut. I made a plane to start, rotated it to draw the rectangle.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/ffe87cfe752081e55dce6ace293f943c792c752c.jpeg)

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 28, 2021, 6:26am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083/3 "2021-11-28T06:26:35Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c233f8ff6c9fe0480bedefcdec51c403d2490f8b.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/679c9509d2199234bc271840b213586180a99033.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/bbb7f8c6dac35d7035f3f5d82bae41fb39b35c2e.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/a5234235d8005bbe534b932c95e1596ceaa45082.jpeg)  
.

---

<div class="post-metadata">

**Author:** ![Keinobi](https://avatars.discourse-cdn.com/v4/letter/k/aeb1de/32.png) [@Keinobi](https://discourse.shapr3d.com/u/Keinobi)\
**Post date:** [November 28, 2021, 8:40am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083/4 "2021-11-28T08:40:10Z")

</div>

Thank you for your response!  
Your picture is what I wanted to do.  
But I don’t understand “ Use the same triangle to extrude cut the bottom flat.”  
I think it would make slope shape.  
Could you tell me more please?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/3f688b7a7ac99fb0c5ceedf6e9be6fd6f0c707e9.jpeg)

---

<div class="post-metadata">

**Author:** ![Keinobi](https://avatars.discourse-cdn.com/v4/letter/k/aeb1de/32.png) [@Keinobi](https://discourse.shapr3d.com/u/Keinobi)\
**Post date:** [November 28, 2021, 9:21am UTC](https://discourse.shapr3d.com/t/curved-slope-modeling/16083/5 "2021-11-28T09:21:56Z")

</div>

Thank you, I made the shape.  
I appreciate your advice!

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/968676d8b9ffd235b4b2894ec0930032e1ab213d.jpeg)