# Cut cone - pattern

**URL:** <https://discourse.shapr3d.com/t/cut-cone-pattern/17208>\
**Category:** Modeling Questions\
**Created:** [February 4, 2022, 2:18am UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208 "2022-02-04T02:18:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![D.konczal](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@D.konczal](https://discourse.shapr3d.com/u/D.konczal)\
**Post date:** [February 4, 2022, 2:18am UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/1 "2022-02-04T02:18:24Z")

</div>

Hello.

At first I want to say hello to all,l am new here.

My question is, how to make a pattern (2d dxf file) from a cut cone with few millimeter tab for glue?

Best regards from Poland

---

<div class="post-metadata">

**Author:** ![Gusriwandi](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@Gusriwandi](https://discourse.shapr3d.com/u/Gusriwandi)\
**Post date:** [February 4, 2022, 8:33am UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/2 "2022-02-04T08:33:30Z")

</div>

It would be clear if you enclose a picture…

---

<div class="post-metadata">

**Author:** ![D.konczal](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@D.konczal](https://discourse.shapr3d.com/u/D.konczal)\
**Post date:** [February 4, 2022, 12:03pm UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/3 "2022-02-04T12:03:48Z")

</div>

Hello,

I want to make something like this:  
 ![cone_bottom](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/8/8716d43b9e822593573fc98f3ca949cd916d6870.jpeg)

from cone project and add few millimeters of overlap (after cut I want to stick it together to make a cone- side wall).

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Gusriwandi](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@Gusriwandi](https://discourse.shapr3d.com/u/Gusriwandi)\
**Post date:** [February 4, 2022, 4:15pm UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/4 "2022-02-04T16:15:44Z")

</div>

Do you mean like this?

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/a88150b49c331bdabd007cb0c4fa113124e133c3.MOV](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/a88150b49c331bdabd007cb0c4fa113124e133c3.MOV)

---

<div class="post-metadata">

**Author:** ![D.konczal](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@D.konczal](https://discourse.shapr3d.com/u/D.konczal)\
**Post date:** [February 4, 2022, 7:49pm UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/5 "2022-02-04T19:49:25Z")

</div>

Thank you so much. Can l do the cutter cone first and later render the side wall into 2d?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/496ac35c9b1a2f43dba8252029092ea28b05dc54.jpeg)

---

<div class="post-metadata">

**Author:** ![Gusriwandi](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@Gusriwandi](https://discourse.shapr3d.com/u/Gusriwandi)\
**Post date:** [February 4, 2022, 8:13pm UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/6 "2022-02-04T20:13:52Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b58f7ef5e4e83a3812c10ee76e62a6f3acea624c.jpeg)  
To do so, just do a little math., I guess

---

<div class="post-metadata">

**Author:** ![D.konczal](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@D.konczal](https://discourse.shapr3d.com/u/D.konczal)\
**Post date:** [February 4, 2022, 9:04pm UTC](https://discourse.shapr3d.com/t/cut-cone-pattern/17208/7 "2022-02-04T21:04:27Z")

</div>

Thank you.